Airlive WH-5400CPE-ESD DATASHEET

WH-5400CPE-ESD

802.11g Wireless Outdoor 20dBm All-in-One

equipment to WISP (Wireless Internet Service

F

Provider), Air Live Corp. introduces WH­5400CPE-ESD all-in-one Wi-FI CPE device. The ideal
solution for WISP and other outdoor wireless
applications.

Weather Proof Housing

The WH-5400CPE-ESD is an all-in-one device for
outdoor wireless application that includes everything
you need to make an outdoor wireless connection. The
enclosure is made of weather proof ABS+PC+antiUV
material with integrated 12-dB antenna. With the special
designed splash proof cap for POE/Ethernet Cable, the CPE uses conventional outdoor grade UTP
cable with RJ-45 connector. So you don't need to pay extra cost for special water-proof connectors.
This combination creates a light weight, splash proof, compact, yet durable housing ready for prolong
use in the harsh outdoor condition. Standard Pole mount Kit are provided. Wall mount kit is optional.

Integrated Antenna and Long Distance fi rmware

The WH-5400CPE-ESD has a built-in high performance 12dBi patch antenna on the front surface.
It can deliver wireless signal at up to 3km distance. The ACK Value is displayed in distance, so you
can set the correct ACK Timing value easily for long range operation. Inside the CPE, you will find
AirLive'sAtheros SuperG multifunction Access Point that can run in Client, AP, or WDS Bridge function.
The AP is specially designed for long distance outdoor application with strong signal and heat proof
materials for stable outdoor performance. Best of all, the unit features a Power over Ethernet system
that is specially designed for outdoor application

Lightning Strikes Protection

The built-in lightning protection module provides safety for your WH-5400CPE-ESD from lightning
strikes and electrical induction. If you setup your WH-5400CPE-ESD in open space or rooftop, the
device can be susceptible to lightning strike or proximal electrical induction. The lightning protection
module will re-direct the electrical current to the ground to safeguard your WH-5400CPE-ESD.

Accessories

POE DC Injector Switch Adaptor25m POE Cable Pole Mount Kit Wall Mount Kit

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

Optional

LED Indicator easy status checking

There are 3 LEDs in the bottom of the WH­5400CPE, say, Power, LAN and WLAN. Power
LED indicats the device power situation, it the
lights up when WH-5400CPE is powered. LAN
and WLAN LED shows the connection situation of
Ethernet Cable and Wireless independly. These
LED indicators make it easiler to check the device
status when installing or maintaining.

The WH-5400CPE-ESD is an complete product solution from a company that fully understand
the need of the WISP environment

* WH-5400CPE-ESD has antenna built-in, it has no external antenna connector

Specifi cations

Standard

- IEEE 802.11b

- IEEE 802.11g

- IEEE 802.3

- IEEE 802.3u

- IEEE 802.3X

Modulation

- IEEE802.11b: CCK,DQPSK,DBPSK

- IEEE802.11g: OFDM

Frequency Band

- America/FCC 2.412~2.462 GHz (11 channels)

- Europe CE/ETSI 2.412~2.472 GHz (13
channels)

- Japan 2.412~2.484 GHz (14 channels)

- France 2.457~2.472 GHz(4 channels)

Transmission Power

- 802.11b:20 dBm

- 802.11g:19.5 dBm

Transmission Rate

- IEEE802.11b: 1/2/5.5/11Mbps

- IEEE802.11g: 6/9/12/18/24/36/48/54MbpsI

Access Point Interfaces :

- Auto MDI/MDI-X Ethernet 10/100Base-TX: RJ­45

Sensitivity

- -88dBm @ 11Mbps, PER < 8%; -74dBm @
54Mbps, PER < 10%.

Antenna Type

- Integrated 12 dBi flat panel antenna

- 45 degree H-Plane (Horizontal)

- 40 degree E-Plane (Vertical)

- Front-To-Back: 18dB.

Security Systems

- 64-bit/128-bit WEP encryption; Wi-Fi

- Protected Access (WPA) and WPA2

Wireless Setting

- Operation Mode AP / Wireless
Client(Infrastructure and Ad Hoc) / Repeater /
WDS PtP and PtMP Mode

LED Indicator

- Power: Red

- WLAN: Green

- LAN: Green

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan