AEG-Electrolux EWB76215W, EWB86215W, EWB96215W User Manual

0 (0)

EWB 76215 W

................................................ .............................................

EN WASHING MACHINE

USER MANUAL

EWB 86215 W

EWB 96215 W

AEG-Electrolux EWB76215W, EWB86215W, EWB96215W User Manual

2 electrolux

PRODUCT DESCRIPTION

1 The control panel

2 Lid handle

3 Filter access cover

4 Adjustable levelling feet

CONTROL PANEL

1

2

3

4

5

6

1.Programme selector

2.Spin speed selector

3.Pushbuttons and their functions

4.Lights of cycle progress

5.“Start/Pause” pushbutton

6.“Delay start” pushbutton

DISPENSER BOX

Prewash

Wash

Softener (do not fill above the MAX

symbol M )

electrolux 3

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.

CHILDREN AND VULNERABLE PEOPLE SAFETY

Warning! Risk of suffocation, injury or permanent disability.

Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety.

Do not let children play with the appliance.

Keep all packaging away from children.

Keep all detergents away from children.

Keep children and pets away from the appliance door when it is open.

If the appliance has a child safety device, we recommend you activate it.

GENERAL SAFETY

Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.

Do not change the specification of this appliance.

Obey the maximum load volume of 6 kg (refer to the “Programme chart” chapter).

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

The ventilation openings in the base (if applicable) must not be obstructed by a carpet.

The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

SAFETY INSTRUCTIONS

INSTALLATION

Remove all the packaging and the transit bolts.

Keep the transit bolts. When you move the appliance again you must block the drum.

Do not install or use a damaged appliance.

Do not install or use the appliance where the temperature is less than 0 °C or where it is exposed to the weather.

Obey the installation instruction supplied with the appliance.

Make sure that the floor where you install the appliance is flat, stable, heat resistant and clean.

Do not install the appliance where the appliance door can not be fully opened.

Always be careful when you move the appliance because it is heavy. Always wear safety gloves.

Make sure that there is air circulation between the appliance and the floor.

Adjust the feet to have the necessary space between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical shock.

The appliance must be earthed.

Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.

Always use a correctly installed shockproof socket.

Do not use multi-plug adapters and extension cables.

Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable.

4 electrolux

Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Do not touch the mains cable or the mains plug with wet hands.

This appliance complies with the E.E.C. Directives.

Water connection

Make sure not to cause damage to the water hoses.

The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean.

The first time you use the appliance, make sure that there is no leakage.

USE

Warning! Risk of injury, electrical shock, fire, burns or damage to the appliance.

Use this appliance in a household only.

Obey the safety instructions on the detergent packaging.

Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

Make sure that you remove all metal objects from the laundry.

Do not put a container to collect possible water leakage under the appliance. Contact the Service to ensure which accessories can be used.

CARE AND CLEANING

Warning! Risk of injury or damage to the appliance.

Do not use water spray and steam to clean the appliance.

Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

DISPOSAL

Warning! Risk of injury or suffocation.

Disconnect the appliance from the mains supply.

Cut off the mains cable and discard it.

Remove the door catch to prevent children and pets to get closed in the appliance.

PRECAUTIONS TO BE TAKEN AGAINST FROST

If your appliance is exposed to temperatures below 0°C, the following precautions must be taken:

Close the tap and disconnect the inlet hose.

Place the end of this hose and the drain hose in a basin on the floor.

Select the Drain programme let it run until the end of the cycle.

Disconnect the appliance from the power supply by turning the programme selector to “Stop” .

Unplug the appliance.

Replace the inlet hose and drain hose. This way, the water remaining in the hoses will be drained away, avoiding any ice formation which would damage your appliance.

Before turning your appliance on again, ensure that it is installed in an area where the temperature will not fall below freezing.

HOW TO RUN A WASH CYCLE?

USING FOR THE FIRST TIME

• Ensure the electrical and water connections comply with the installation instructions.

Remove the polystyrene insert and all other items inside the drum.

Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water tank.

Loading...
+ 8 hidden pages