ADTRAN T-WATCH Pro Quick Start Guide
T-WATCHTM PRO
Quick Start Guide
61950010L1-13E
ADTRAN, Inc.
901 Explorer Blvd.
P.O. Box 140000
Huntsville, AL 35814-4000
(256) 963-8000
61950010L1-13 1
Trademarks and Copyrights
Windows is a registered trademark and NT is
a trademark of Microsoft Corporation.
Copyright 2002, ADTRAN, Inc. All rights reserved. Printed in USA.
2 61950010L1-13
WHEN TO USE THIS DOCUMENT
Use this Quick Start Guide if you are
loading T-Watch Pro for the first time or
upgrading your software from T-Watch to
T-Watch Pro.
T-WATCH PRO OVERVIEW
T-Watch Pro is a PC-based management
software package for the TSU/TDU/HSU
series of T1/FT1 DSU/CSUs. T-Watch
Pro allows the user to configure multiple
TSU/HSU devices from a single central
control point, including the T1 network interface and all module data terminal
equipment (DTE) interface parameters.
Through comprehensive network monitor
functions, T-Watch Pro automatically collects alarm conditions and/or unit status
information from any of the remotely located TSUs. While performance data
may be obtained manually from each
TSU, automatic performance monitoring
61950010L1-13 3
allows each TSU to be polled daily for
performance information at a user-specified time. T-Watch Pro also allows the
user to retrieve the current status and
performance data at any time.
SYSTEM REQUIREMENTS
To run T-Watch Pro, your computer must
have the following settings:
• 386 (or higher) IBM PC or compatible
• Windows NT, or Windows 95, 98, or
2000 operating system
• CD-ROM drive
• EGA, VGA, Hercules, or compatible
monitor
•Mouse
• 8 megabytes memory
• 5 megabytes free disk space
4 61950010L1-13
Loading...