ADTRAN T1-FT1 CSU, T1-FT1 DSU User Manual

Product Features
Real-time measurement of
throughput, bandwidth utilization, bursting, congestion, and network delay on each PVC
Bandwidth utilization by
End-to-end network round
trip delay measurements for network optimization
N-Form
provides a web­based, cost-effective, easy-to-use management platform
True non-intrusive in-band
transmission of statistics
Embedded SNMP and
Telnet through SLIP/PPP port or optional Ethernet interface
Optional Dial Backup to
avoid service interruption
Standard V.35 DTE
Interface
Easy configuration from
Front Panel, SNMP, Telnet or VT100
Standard five-year
warranty
ADTRAN’s industry-leading and award­winning DSU/CSU family continues to provide more flexibility with the TSU IQ.
The TSU IQ provides the visibility and control you need for both the physical and logical connections made in Frame Relay networks. This intelligent solution for managed Frame Relay access allows you to enjoy the monetary savings of Frame Relay without giving up management visibility and control.
Real-time measurements of Frame Relay metrics are stored in the TSU IQ. These metrics include statistics on throughput and utilization per port and PVC, availability, utilization by protocol, top talkers lost frames and PVC state, excess bursting above CIR, network congestion (FECN, BECN, and DE), and end-to-end delay on any or all PVCs. This data is crucial for pinpointing specific traffic demands and problem sources in the network, for analyzing traffic patterns, and for general maintenance and troubleshooting of the Frame Relay circuit.
The statistics are stored in the TSU IQ in a standard ASN.1 format making the statis­tics available to any SNMP management platform or trend analysis package. ADTRAN offers N-Form, a powerful proactive network management software suite. Modular in design, N-Form combines the features of a complete SNMP management platform, with a network trend analysis tool, in an easy-to­use, web-based, low cost package.
The TSU IQ supports multiple ways to access the collected performance data. This management flexibility accommodates both the service provider and the end user in any
type of network configuration. Options include simple VT100 connection, front panel, management access through inband dedi­cated or shared PVCs, SLIP/PPP or ethernet, and combination management. Combination management allows for simultaneous and independent management by the service provider and the end user.
The IQ family provides automatic dial backup upon interruption of Frame Relay services. The TSU IQ monitors both the phys­ical link and the Frame Relay signal to determine if an interruption has occurred. Once detected, the unit automatically initi­ates a dial-up call around the Frame Relay network. A host IQ unit initiates and accepts calls to and from IQ units at remote sites. Once connected, the host unit merges backup traffic with the primary traffic still being received from unaffected remote sites. The router or Frame Relay device connected to the TSU IQ still receives all data as Frame Relay traffic over the primary connection, allowing a virtually transparent transition. Once the failed condition has been cleared and the Frame Relay interruption is over, the IQ unit automatically restores traffic to the primary link.
Additional features such as an easy-to-use front panel interface and modular option cards combined with the quality, service and support that ADTRAN is known for makes the TSU IQ the obvious choice for Frame Relay monitoring. The IQ series also includes the IQ Probe, DSU IQ™, TSU IQ+™, and the NxIQ module for the TSU multiplexer family.
TSU IQ
Frame Relay T1-FT1 DSU/CSU
Specifications subject to change without notice. ADTRAN is a trademark of ADTRAN, Inc. All registered trademarks and trademarks mentioned in this publication are the property of their respective owners.
Product Specifications
Operating Modes
100 DLCIs supported
T1/FT1 Frame Relay
Auto LMI/Annex D detection
Frame Relay Statistics
Access Line Statistics
T1 BPVs, CRCs, ES, SES, UAS, %AS, %EFSEC, Alarm, Errors
Telco loop test in progress
PVC Statistics
PVC state
Bytes Tx/Rx; frame Tx/Rx
Frames with BECN/FECN/DE
Max/Min/Avg frame size
Throughput/bandwidth utilization per PVC
Lost frames/Sequence check
Continuous PVC delay measurement
Max/Min/Avg end-to-end PVC delay
Burst rate
Congested seconds
Port Statistics
Byte Tx/Rx; frame Tx/Rx
Throughput/utilization
Frame size violations (invalid frames)
CRC errors/abort frames
Non-octet aligned frames
LMI Statistics
LMI state/state changes
Polls in; Responses in
Timeouts/link integrity frames
Polls with protocol error
Layer 3 Statistics
Monitor protocols on port and pvc
Protocols supported: IP/IPX, ARP, SNA, other
Top Talkers
Diagnostics
Frame Relay
PVC loopback w/ test pattern/sequence check
PVC round trip delay
Network/User
CSU loopbacks
Line Interface
RJ48S, 4 wire
Timing derived from the Frame Relay Network
Framing: SF/ESF with auto detection
ESF format: AT&T 54016, ANSI T1.403
Line coding: AMI/B8ZS
Input signal: 0 to –36dB
DS0 Assignment: contiguous or alternate
TSU IQ
Frame Relay T1-FT1 DSU/CSU
ADTRAN, Inc.
Attn: Enterprise Networks
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963-8000 voice
256 963-8699 fax
256 963-8200 fax back
General Information
800 9ADTRAN info@adtran.com www.adtran.com
Pre-Sales
Technical Support
800 615-1176 toll-free
application.engineer@adtran.com
www.adtran.com/support
Where to Buy
877 280-8416 toll-free
channel.sales@adtran.com
www.adtran.com/where2buy
Post-Sales
Technical Support
888 423-8726
support@adtran.com
www.adtran.com/support
ACES Installation &
Maintenance Service
888 874-ACES
aces@adtran.com
www.adtran.com/support
International Inquiries
256 963 8000 voice
256 963-6300 fax
international@adtran.com
www.adtran.com/international
For the regional office
nearest you, visit:
www.adtran.com/where2buy
DTE Interface
V.35 Winchester M block female
56 to 1.536, Nx56 or Nx64 kbps (N=1 to 24)
Configuration
Front Panel
Local and Remote VT 100 terminal via the Control port
Remote configuration via frame relay network connection
Telnet and SNMP
SNMP/Telnet
Embedded SNMP and Telnet inband access through shared or dedicated PVC
Integrated SLIP/PPP (async) port
Optional 10BaseT interface
RFC 1213 MIB II, RFC 1315 compliant
ADTRAN Enterprise MIB for frame monitoring and TSU control
Agency Approvals
FCC Part 68, Part 15 Class A
Industry Canada CS03
UL1950 and CUL
Environment
Operating Temperature: 0° to 50° C, (32° to 122° F)
Storage Temperature: –20° to 70° C, (–4 to 158° F)
Relative Humidity: Up to 95%, non-condensing
Physical
Dimensions: 10.4" D, 8.0" W, 2.4" H
Weight: 4.5 lbs
Power: 115 vAC, 60 Hz, 7W
Product Includes
Two 8-pin to 8-pin modular cables, modular to female DB-25 adapter and user manual
Ordering Information
Equipment Part #
TSU IQ
1200215L1 V.34 DBU card 1204002L2 SW56 DBU card 1204001L1 ISDN BRI DBU card 1204004L1 ISDN PRI DBU Card 1204008L1 External DBU card 1204006L1 Ethernet card 1204005L1 TSU IQ RM 1200277L1 TSU IQ RM w/PRI DBU 4200277L1
Printed in the U.S.A.
61200215L1-8F May 2002
©2002 ADTRAN, Inc. All rights reserved.
ADTRAN is a
TL 9000 registered company.
ADTRAN is a
ISO 9001 registered company.
Loading...