ADTRAN T1 ESF CSU ACE Quick Start Guide

Network

For more detailed docum en tati on, visit us online at www.adtran.com

T1 ESF CSU ACE P/N 1203025L1

NSTALLATION INFORMATION

Top View

CPE T1 Device

• An eight-position modu lar ja ck (labe led N

ETWORK

connect to the ne twork T1 circuit. The pinout is provided on this Quick Start Guide. See

Chapter 2, Installa tion

,of the T1 ESF CSU ACE User Manual for more information. An eight-position modular jack (labeled CPE) is provided to connect to the cu stomer equipment. The pinout is provided on this Quick Start Guide. See

Chapter 2, Inst all ati on

ESF CSU ACE User Manual for more information.

• An EIA-232 connect or is pr ov i ded on the b otto m of the T 1 ESF CS U ACE to connect to a proxy agent, T-WA TCH station, ASCII terminal, or a modem. The pinout for the EIA-232 connector can be found in

of the the T1 ESF CSU ACE User Manual.

• The T1 ESF CSU ACE can be config ur ed and co ntr ol led via the loc al front panel, the EIA-232 contr ol por t, or T-WATCH.

• The T1 ESF CSU ACE can be powered by either of t he fol low ing methods:

1. Use the included -48VDC power supply.

2. Use a power cable connected to an on-site -48VDC power supply.

) is provided to

,of the T1

Appendix

• Additional information can be found on the product CD which contains the T1 ESF CSU ACE User Manual, FAQs, Data Sheets, Applications, and White Papers.

ETWORK CONNECTION PINOUT

Pin Name Description

1 R1 RXDATA Receive data from the Network - Ring

CPE C

Pin Name Description

1 R TXDA TA Transmit data towards the Network -

2 T1 RXDATA Receive data from the Network - Tip 3, 6, 7, 8 UNUSED n/a 4 R TXDATA Transmit data towards the Network -

Ring

5 T TXDATA Transmit data towards the Network - Tip

2 T TXDATA Transmit data towards the Network - Tip 3, 6, 7, 8 UNUSED n/a 4 R1 RXDATA Receive data from the Network - Ring 5 T1 RXDATA Receive data from the Network - Tip

ONNECTION PINOUT

Ring

T1 ESF CSU ACE P/N 1203025L1

ENU TREE

1) NI PERF REPORTS

1) STATUS 2) CURR ERR/ALM

3) ERR/ALM HISTORY

1) NETWORK (NI)

2) CONFIG 2) UNIT

MAIN MENU 3) PORT

1) TIME/DATE

2) SOFTWARE REV Displays the current software revision

3) UTIL 3) REINIT UNIT

4) ADDRESS

5) FACTORY RESTORE Restores all configurations to factory settings

1) NETWORK TESTS

4) TEST 2) RUN SELF TEST

3) PORT TESTS