Acer AL708 User Manual
Contents
Precautions………………………………………………………………3
Package Contents………………………………………………………..3
Installation Instructions
Monitor Installation……………………………………….……..4
Monitor Packing…………………………………………………4
Viewing Angle Adjustment……………………………………...4
Connecting……………………………………………………….5
Adjusting Display Setting………………………………………………..6
Troubleshooting………………………………………………………….9
General Specifications………………………………………………….10
1
PRECAUTIONS
z
Do not place the monitor near or over a radiator or heat vents. Do not place the
monitor in a badly ventilated room.
z
Slots and openings on the back or top of the cabinet are provided for ventilation.
They must not be blocked or covered.
z
Do not write on the screen or touch the screen with a sharp object. You will
permanently scratch the LCD panel.
z
Unplug this monitor from the wall outlet before cleaning. Please use a soft, lint-free
cloth to clean the monitor housing. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Do not spray liquid directly onto
the display screen. Liquid could drip inside the display and cause electrical shock.
z
Do not attempt to service the monitor yourself; opening or removing covers can
expose you dangerous voltages and other hazards. Please contact qualified service
personnel for servicing if the problems of your monitor cannot be solved by
“ Troubleshooting” section.
Package Contents
2
LCD Monitor Power Cord Power Adapter
Audio Cable User Manual VGA Cable
Installation Instructions
2
Monitor Installation:
1. Position the display on top of the
display.
. Connect the stand into the neck
of display along the track.
Monitor Packing:
Important
Before you start, make sure there is a clean, flat surface where you can place the display
once it’s removed from the stand. To protect the screen, place a towel or cloth on the
surface.
1.Pull the display slightly up and away from the stand.
Viewing Angle Adjustment:
-5°
You are able to adjust the monitor’s angle from
Caution:
Make sure that the computer and monitor’s power are both
turned off.
This device must be operated with the original power supply
part number: LSE9901B1250 of Li-Shing International
á
20°.
3
Loading...