Digital Multimedia Projector
OPERATING GUIDE
Outline
!" " #!$
Features
(1)High brightness
(2)High resolution
(3)Compact size, light weight for portability
(4)RGB output terminal
(5)RS232 Communication
(6)Mouse emulation
(7)Complies with VESA DDC1/2B specifications
Copyright
Copyright © 2000 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Disclaimer
This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.
Fill this in!!
For the convenience of service, record the following information in the space below. The serial number is on the back of the product.
Monitor Information
Product Name: 7763P/65PE
Serial Number:
Date of Purchase:
Dealer Information
Dealer:
Telephone
Number:
Address:
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. AND PLEASE READ ALL OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE .
Safety Instructions
1.Read all of these instructions before you operate your projector and save for future reference.
2.The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to explode in rare occasions.
3.Power is still available when the projector is in the standby mode. Never replace lamp assembly or any electronic components unless the projector is unplugged.
4.Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty.
5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6.The Standard Remote Control contains a low-power laser that acts as a pointing device during presentations. The light beam may cause injury if pointed directly into a person’s eyes.
7.This product is capable of displaying inverted images for ceiling mount configurations. Please use suitable equipment for mounting the unit and make sure it is securely installed.
8.Openings in front or at two sides are for ventilation. They must not be blocked or covered.
9.For ventilation reasons, the fan continues to operate for about 2 minutes after the projector has been powered off. Please do not unplug the power cord until the fan stops.
10.Do not look straight at the projector lens during operation. The intense light beam may injure your eyes.
English II
Table of Contents |
|
|
Introduction............................................................................................................................................................... |
|
1 |
Projector Features .................................................................................................................................. |
1 |
|
Description ................................................................................................................................................... |
2 |
|
A FRONT (figure)....................................................................................................................... |
2 |
|
B REAR (figure)............................................................................................................................. |
2 |
|
C BOTTOM (figure).................................................................................................................. |
3 |
|
Installation...................................................................................................................................................... |
|
3 |
A. |
Positioning............................................................................................................................. |
3 |
B. |
Adjustable Feet.................................................................................................................. |
3 |
Moving the Projector.............................................................................................................................. |
4 |
|
Accessories ................................................................................................................................................... |
5 |
|
Connection................................................................................................................................................................ |
|
6 |
A Connecting the Projector to Computer/Notebook ..................................... |
6 |
|
B Connecting the Projector to Macintosh/Power Book .................................. |
7 |
|
Operation................................................................................................................................................................... |
|
8 |
Turn On/Off Procedure........................................................................................................................ |
8 |
|
A Power on .................................................................................................................................... |
8 |
|
B Standby ......................................................................................................................................... |
8 |
|
External Control........................................................................................................................................ |
8 |
|
A |
Control Pad........................................................................................................................ |
8 |
B |
Remote Control............................................................................................................... |
9 |
Usage and Replacement of Lamp.................................................................................................. |
11 |
|
A Lamp/temperature Status LED Indicator................................................................ |
11 |
|
B Replacing the Lamp............................................................................................................. |
13 |
|
OSD .............................................................................................................................................................. |
|
15 |
Main OSD Menu .................................................................................................................................... |
15 |
|
A |
Display Page.................................................................................................................... |
16 |
B |
Image Page........................................................................................................................ |
17 |
C |
Control Page.................................................................................................................... |
18 |
D |
Source Page ..................................................................................................................... |
18 |
Other Correspondent Remote Functions and Messages................................................. |
19 |
|
Maintenance and Troubleshooting ............................................................................................................ |
21 |
|
A |
Lamp Replacement....................................................................................................... |
21 |
B |
Cleaning the Lens........................................................................................................... |
21 |
C |
Troubleshooting .............................................................................................................. |
21 |
Specifications.......................................................................................................................................................... |
|
22 |
A |
Optical................................................................................................................................. |
22 |
B |
Electrical .............................................................................................................................. |
22 |
C |
Mechanical .......................................................................................................................... |
22 |
D Preset Display Resolution Table ............................................................................. |
23 |
|
Appendix.................................................................................................................................................................. |
|
24 |
AV Connection Port ............................................................................................................................ |
24 |
|
AV Control Pad ...................................................................................................................................... |
24 |
|
A |
Connecting the Box..................................................................................................... |
25 |
English III
Introduction 1
Projector Features
A Image Resolution
Fully compatible with true SVGA(63P)/XGA(65PE), and supports SXGA using advanced intelligent compression technology. The advanced intelligent compression technology enables it to present clear compression SVGA/XGA images without line omission.
B Brightness
Provides superior brightness of 700 ANSI lumens using TI’s Digital Micromirror Device (DMD) and our own optical design, with a geometric effect that increases light usage efficiency. By increasing the light usage efficiency we can better reproduce the three basic colors (RGB) required for color reproduction on a single DMD.
C Portability
This projector has a sophisticated shape, like that of an attaché case, with a retractable carrying handle that is extremely compact and lightweight. It helps you make powerful presentations wherever you go with its 5-pound weight and B5 size.
D Keystone
The projection position is already set to the height of the line of vision; there is no keystone effect. Even when projecting above or under the height of the line of vision, image distortion (if any) can be adjusted using the keystone correction function.
E Multilanguage
The OSD (On Screen Display: information screens and menus) in 7 languages (English, Deutsch, Français, Italiano, Español, Swedish and Dutch) provides you with additional information to help you make corrections with OSD operation in your native languages.
F Auto Detect System
This projector can detect display signals from PCs with frequently used timing and do the optimization simultaneously. It does not require complicated adjustments in order to project picture images from PCs.
G Ceiling Mount and Rear Screen Projection
The projector is equipped with a full mirror scan conversion function (vertical/horizontal mirror), which allows the image to be reversed for ceiling mounting as well as for rear projection applications.
H AV box
An AV box is optional, and users can attach one or two to the projector. Additionally, our AV box video standard is compatible with
English 1
NTSC |
U.S. and Canada standard |
PAL |
Western Europe standard |
SECAM |
France and Eastern Europe standard |
NTSC4.43 |
Middle East standard |
If users want to watch CATV, AV box will serve the need.
Description
A FRONT (figure)
Figure 1 Front view of 7763P/ 65PE
B REAR (figure)
Figure 2 Rear view of 7763P/65PE
English 2
& %27720 ILJXUH
)LJXUH %RWWRP YLHZ RI 3 3(
Installation
$ 3RVLWLRQLQJ
•7KLV SURMHFWRU LV EDVLFDOO\ GHVLJQHG WR SURMHFW RQ D IODW SURMHFWLRQ VXUIDFH
•7KLV SURMHFWRU FDQ EH IRFXVHG IURP Pq P
•5HIHU WR WKH ILJXUH EHORZ WR DGMXVW WKH VFUHHQ VL]H
)LJXUH 3RVLWLRQLQJ RI 3 3(
% $GMXVWDEOH )HHW
3LFWXUH WLOW DQG SURMHFWLRQ DQJOH FDQ EH DGMXVWHG E\ WZLVWLQJ $GMXVWDEOH )HHW 3URMHFWLRQ DQJOH FDQ EH DGMXVWHG ¶ WR ¶ GHJUHHV E\ URWDWLQJ $GMXVWDEOH )HHW
)LJXUH $GMXVWDEOH IHHW
English 3
Moving the Projector
Use the carrying handle when moving the projector.
Replace the lens cover and rotate the feet fully clockwise (to shorten the feet) when moving the projector to prevent damage to the projector.
Caution
The carry bag (supplied) is intended to protect the projector from dust and scratches on the surface of the cabinet. It is not designed to protect the projector from external shock.
Do not transport the projector in an unsuitable transport case by using a courier or transport service. This may cause damage to the projector.
Figure 6 Moving the projector
English 4
Accessories
Please check and make sure your box contains everything listed below. If any pieces are missing, contact your dealer.
Please save the original box and packing materials in case you ever need to ship the unit.
Figure 7 Accessories of 7763P/65PE
English 5
Loading...