Caseback markings
wAccurist Watches Logo
MB 119 |
|
Model Number |
||
|
||||
CAL 0T10 |
|
|
Calibre Number |
|
|
|
|||
SR927W |
|
|
Battery Number |
|
|
|
|||
OS60, OS10 & OT10 Operating Instructions
|
Dial A |
|
Top Left (TL) (minute dial) Top Right (TR) |
||
Dial C |
|
|
(hour dial) |
|
|
|
|
Position A Position B Position C |
Bottom Left (BL) |
Dial B |
Bottom Right (BR) |
|
|
|
(seconds dial)
To set the time:
1.Gently pull out crown to position C.
2.Turn crown either way to correct time.
3.Push in crown to position A.
To set the date:
1.Gently pull out crown to position B.
2.Turn crown anti-clockwise to adjust date.
3.Push in crown to position A.
Using the chronograph:
1. Press BR Button to put the watch in Chronograph mode.
Making sure all sub dials are zeroed. If not, refer to ‘Chronograph Zero Reset’. 2. Press TR Button to start and stop the chronograph
OS60, OS10 & OT10 Operating Instructions continued . . .
3.Press BR Button to reset the chronograph
4.When you have finished with the Chronograph function, press BR Button again; this re-starts the small second hand on Dial B.
Note: After 30 seconds the Second hand on Dial B will stop at the zero position, however, the time is still continuing to be measured in seconds and when TR Button is pressed to stop the timing, the second hands will automatically move to show the time.
Chronograph zero set:
This procedure is only necessary when the battery is replaced, or when the Chronograph hands do not return to the ‘0’ position, when the Chronograph mode is selected.
1.Gently pull out crown to position C.
2.Push TR Button to advance the sweep second hand to the 12 0’clock position. Please note each push of the TR Button will advance the hand 1 second. Alternatively, depress and hold the Button for 2 seconds and the hand advances continuously.
3.Push BR Button; this automatically re-sets sub dials. Each subsequent push will advance the Second hand on sub dials by 1 marking. Alternatively, depress and hold Button for 2 seconds; the hand will advance continuously until released.
4.Push in crown to Position A.
FS60 Operating Instructions
Chronograph
Minute Hand
Chronograph
Second Hand
Top Right (TR)
Day indicator (The angle of this fanshaped day indicator may vary from model to model).
Position A Position B Position C
Bottom Right (BR)
Date indicator
Loading...