Instruction Guide and
2 year Guarantee
Service and Repairs
Your ACCURIST watch is guaranteed against defects in materials and workmanship for a period of 2 years from the date of purchase. During this period, we will exchange or repair, at our discretion, any defective components free of charge.
IMPORTANT - Not covered by Guarantee
1.Batteries, straps and bracelets.
2.Damage caused by accident, misuse or lack of care.
3.Water penetrations except in watches marked as “Water Resistant”.
SERVICING AND REPAIRS UNDER GUARANTEE
Please post your watch, together with the Retailer’s Sales Receipt or proof of purchase, the completed Guarantee slip, and a brief note to explain the nature of the fault, by Registered Post or Recorded Delivery to the address shown. Do not send the presentation box as this will NOT be returned.
SERVICING AND REPAIRS OUTSIDE OF GUARANTEE
Available at a reasonable charge after an estimate has been sent by T.P. (UK) Ltd. Send your watch to us by Registered Post or Recorded
Delivery to the address shown.
Important Note
It is important to identify your watch correctly. If, after reading this Instruction Guide, you have any further questions regarding the use, operation or adjustment of your watch, please call us during office hours on 0116 288 2500.
T.P. (UK) Ltd, Alexander House, Chartwell Drive, Wigston, Leicester
LE18 2EZ
United Kingdom.
Water Resistance
If your watch is water resistant, it will clearly state “Water Resistant” or have a static water pressure indication (e.g. “30/50/100/200 metres”) on the dial and/or case back.
If it is not marked as water resistant, it should not be allowed to come into contact with water or be worn in conditions that could expose
it to moisture (e.g. washing, heavy rain etc.). Certain chemicals in water may damage the watch seals. To maintain water resistance, we recommend that your watch is serviced and re-sealed at least every 12 months by T.P. (UK) Ltd.
IMPORTANT
Buttons must not be operated while in contact with water.
WATER RESISTANT or RESISTANT TO 30 METRES
Suitable for normal everyday use and will resist exposure to splashes and rain; it is NOT designed to be used whilst bathing or swimming.
WATER RESISTANT TO 50 METRES
As 30 metres plus bathing or swimming.
WATER RESISTANT TO 100 METRES
As 50 metres plus pool side diving and snorkelling, but not high board or scuba diving.
WATER RESISTANT TO 200 METRES
As 100 metres plus scuba diving, but not high board diving.
Dial B |
Dial A |
|
|
||
Upper Left |
Upper Right |
|
Button |
||
Button |
||
|
||
Display |
Digital |
|
display D |
||
E |
Display |
|
Lower Left |
F |
|
Lower Right |
||
Button |
Button |
|
Dial C |
|
Button and display key
Upper Left button ‘UL’ (hold) is for retracting hands to 12 O’clock position.
Lower Left button ‘LL’ is for adjustments DOWN when altering settings.
Lower Right button ‘LR’ is for function change.
Upper Right button ‘UR’ is for adjustments UP when altering settings.
Dial ‘A’ is UTC time indicator = GMT. Dial ‘B’ is 24 hour indicator.
Dial ‘C’ is function choice indicator.
D1 |
|
D2 |
D3 |
D4 |
D6 |
D5 |
Button TL Display |
Button TR Display |
F1 |
E1 |
F2 |
E2 |
Button BL Display |
Button BR Display |
Digital Display D
When in Time mode: TME
D1: Name of City, e.g. LON (London)
D2: Time in City (hours)
D3: Time in City (minutes)
D4: AM or PM
D5: Summer time indicator
D6: Seconds
Display E & F
The exact function each button performs is displayed in the small display panels E & F, they change dependant on which mode the watch is in.
E1 corresponds to UR button.
E2 corresponds to LR button.
F1 corresponds to UL button
F2 corresponds to LL button
Instructions
If the hands are obscurring the digital display, press and hold ‘UL’ button to retract the hands to the 12 O’clock
position at any time.
Features |
• |
Chronograph |
|
• |
30 Time Zones |
||
• |
3 Alarms |
• |
Countdown Timer |
• |
Calender |
|
|
Setting the time
1.Press ‘LR’ button until the mode hand indicator points to TME.
2.Select the time zone on the digital display by pressing ‘UR’ to increase the number or ‘LL’ to decrease the number.
3.Pull out ‘LR’ to first click. When the lower part of the digital display is flashing press ‘LL’ to select or deselect summer time.
4.Press ‘UR’ to flash the seconds, press ‘LL’ to reset to 00.
5.Press ‘UR’ to flash the minutes, then press ‘LL’ to select the current time.
6.Press ‘UR’ to flash the hours, then press ‘LL’ to select the current time.
7.Press ‘UR’ to flash 12H or 24H. Press ‘LL’ to switch between 12 hour and 24 hour.
8.Once this sequence is complete push ‘LR’ back in to starting position to confirm selections.
GUARANTEE
PLEASE USE BLOCK CAPITALS
NAME
ADDRESS
POST CODE
DAYTIME TELEPHONE NUMBER
IMPORTANT
This guarantee slip should be retained by the owner of the product and should be sent to Timeproducts (UK) Ltd. together with the product and £12 to cover the handling and postage when service under Guarantee is required.
IA06 |
* Instructions continued overleaf. |
Loading...