FEATURES |
|
|
LIGHT (Button A) |
MO |
(Button D) START |
|
|
:08 |
|
|
1212 |
MODE (Button B) |
2 |
(Button C) RESET |
1.10 digits to display hour, minute, second, date, month, the day of week.
2.12/hour/24 hour format selectable.
3.Daily Alarm and Hourly Time Signal
4.Stopwatch.
5.EL Backlight.
PRODUCT FUNCTION MODES |
|
|
|
|
||
MO |
Button B |
AL |
Button B |
ST |
Button B |
MO |
:08 |
|
: |
|
:00 |
|
:08 |
1212 |
|
1:00 |
|
0000 |
|
1212 |
2 |
|
|
|
2 |
|
2 |
In any mode, EL backlight illuminates for 3 seconds by pressing A.
In the timekeeping Mode, press D to toggle the time format between 12-hour and 24-hour. It is 24-hour format if indicator of ‘24H’ appears on the screen.
ALARM
In the alarm mode, press D button to turn on/off Alarm and Hourly Time Signal. Following indicators display on the screen when Alarm or Hourly Time Signal is turned on:
Alarm indicator (
), or both of them (
) display on the screen if they are turned on at the same time.
If alarm is turned on, once the preset time is reached, the alarm tone sounds for 20 seconds with alarm indicator (
) flashes. To stop alarm tone after it starts to sound, please press B, C or D button.
You can also turn on an Hourly Time Signal that causes the watch to beep every hour on the hour.
Alarm setting: In the alarm mode, press C button until ‘hour’ digits start to flash, which indicates alarm time setting screen, then press D button to adjust hour values, hold down D button for some time to quickly adjust it.
Alarm
Press C button again ‘minute’ digits start to flash, then you also need to press D button to adjust minute values, and hold down D button for some time to quickly adjust minute values. After this, please press C button to exit alarm time setting screen.
In setting mode, the watch will automatically exit from setting screen if you do not perform any button within 90 minutes.
STOPWATCH
The display range of the stopwatch is 59 minutes, 59.99 seconds.
To measure times with stopwatch: In the Stopwatch Mode, you can press D button to start counting and press D button again to stop counting. Press C button to reset when Stopwatch stops Counting.
To measuere with split time: in the Stopwatch Mode, press D button to start counting, and press C button to enter split time. Then press C button again to exit split time in the process of splitting time, you can press D button to stop counting. At this time, press C button to display the all times of stopwatch and press C once again to reset.
The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.
Press B button to display other function modes when stopwatch is running. However, stopwatch continues running at the backstage.
Stopwatch
Elapsed Time |
|
|
|
|
|
|
|
|
Button D |
|
Button D |
|
Button D |
|
Button D |
|
Button C |
|
|
|
|
|||||
start |
stop |
|
restart |
stop |
|
clear |
||
Split Time |
|
|
|
|
|
|
|
|
Button D |
|
Button C |
|
Button C |
|
Button D |
|
Button C |
|
|
|
|
|||||
start |
split |
|
split release |
stop |
|
clear |
||
Two Finishes |
|
|
|
|
|
|
|
|
Button D |
|
Button C |
|
Button D |
|
Button C |
|
Button C |
|
|
|
|
|||||
start |
split first |
split second runner |
split release |
|
clear |
|||
|
|
runner |
|
finishes |
display time |
|
|
|
|
|
finishes |
|
|
|
of second |
|
|
Loading...