Accurist 7045.01, 7046.01, 7048.01, 7084.81, 7085.01 Instruction manual

CASEBACK MARKINGS

Model Number

Calibre Number

Battery Number

CARE OF YOUR WATCH

Avoid temperature extremes

1.Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery.

2.Do not leave your watch for long periods of time in extremely cold places; this may cause your watch to gain or lose time. Should it begin to gain or lose time, place your watch on your wrist to restore it to its normal working temperature.

Avoid wet conditions

1.Do not operate the buttons when your watch is wet, even on models marked ‘Water Resistant’.

2.Check caseback markings and refer to the Resistance to water section.

Care Of Your Watch

Avoid strong shocks

1.This watch will withstand the bumps and jars normally incurred during sports activities.

2.Avoid dropping your watch on the ground or otherwise imparting severe shock to it.

Avoid strong magnetic fields

1.Keep your watch away from strong magnets.

2.Generally, your watch is not affected by magnetic fields from household appliances such as television sets and stereo equipment.

Care Of Your Watch

Avoid harmful chemicals, solvents & gases

1.Avoid wearing your watch in the presence of strong chemicals, solvents or gases.

2.Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint.

Periodic inspection

1.A regular 4 to 5 years service by an authorised Accurist technician will ensure trouble free operation.

2.Refer to the After Sales Service section for details.

Care Of Your Watch

IMPORTANT

1.Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately.

2.Do not attempt to replace the battery yourself as this invalidates your guarantee.

Keep your watch clean

Wipe off any moisture that adheres to the case, glass or band with a soft, clean cloth.

BRACELET ADJUSTMENT

The bracelet requires a small adjustment and the model has a Z-type clasp.

1. Depress the end of the spring bar		2. Relocate the spring bar in an
on the centre clasp with a pin.		alternative hole.

Bracelet Adjustment

The bracelet requires a significant adjustment or the model does not have a Z-type clasp.

1.Use the enclosed wrist gauge to measure and mark the size of your wrist.

2.Return the completed wrist gauge with your watch.

3.Follow the instructions in the After Sales Service section to return your watch for adjustment. Your watch will be adjusted free of charge.

RESISTANCE TO WATER

	Indications on dial or caseback		Light spray,	Swimming,
			Perspiration,	etc.
	Dial	Caseback
			Light rain, etc.
	-	Water resistant	Ok	X
	Water resistant	Water resistant	Ok	Ok
	50M (5 ATM)
	Water resistant	Water resistant	Ok	Ok
	100M (10 ATM)
	Water resistant	Water resistant	Ok	Ok
	150M (15 ATM)
	and deeper

QUARTZ ANALOGUE OPERATING INSTRUCTIONS

Position B

Position A

Quartz Analogue Operating Instructions

Please note:

The second hand will not start moving until the crown has been returned to Position A.

To set the time:

1.Gently pull out crown to Position B.

2.Turn crown either way to correct time.

3.Push in crown to Position A.