ABB USB-M-1.1, USB-Interface, MDRC Product manual
Product manual │ 13.01.2021
ABB-free@home®
USB-M-1.1
USB-Interface, MDRC
Branding -- Release 2018-01-01
│
Table of contents
Table of contents
1 Notes on the instruction manual .................................................................................................................... 3
2 Safety ............................................................................................................................................................. 4
2.1 Information and symbols used ........................................................................................................... 4
2.2 Intended use ...................................................................................................................................... 5
2.3 Improper use ...................................................................................................................................... 5
2.4 Target group / Qualifications of personnel ......................................................................................... 6
2.4.1
Operation ..................................................................................................................................... 7
2.4.2
Installation, commissioning and maintenance .............................................................................. 7
2.5 Safety instructions .............................................................................................................................. 8
2.6 Liability and warranty ......................................................................................................................... 8
3 Information on protection of the environment ............................................................................................... 9
3.1 Environment ....................................................................................................................................... 9
4 Setup and function ....................................................................................................................................... 10
4.1 Introduction ....................................................................................................................................... 10
4.2 Device overview ............................................................................................................................... 11
4.3 Overview of types ............................................................................................................................. 12
4.4 Scope of supply ................................................................................................................................ 13
5 Technical data ............................................................................................................................................. 14
5.1 Technical data .................................................................................................................................. 14
5.2 Dimensional drawings ...................................................................................................................... 16
6 Connection, installation / mounting ............................................................................................................. 17
6.1 Requirements for the electrician ...................................................................................................... 17
6.2 Mounting / dismantling ..................................................................................................................... 18
6.2.1
Mounting .................................................................................................................................... 18
6.3 Electrical connection ........................................................................................................................ 19
7 Commissioning ............................................................................................................................................ 20
7.1 Initial commissioning ........................................................................................................................ 20
8 Operation ..................................................................................................................................................... 21
9 Maintenance ................................................................................................................................................ 22
9.1 Maintenance-free device .................................................................................................................. 22
9.2 Cleaning ........................................................................................................................................... 22
10 Notes ............................................................................................................................................................ 23
11 Index ............................................................................................................................................................ 24
Product manual 9AKK107991A4899
2
│
Notes on the instruction manual
1 Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place.
If you pass the device on, also pass on this manual along with it.
ABB accepts no liability for any failure to observe the instructions in this manual.
If you require additional information or have questions about the device, please contact ABB or
visit our Internet site at:
www.BUSCH-JAEGER.com
Product manual 9AKK107991A4899
3
│
2 Safety
The device has been constructed according to the latest valid regulations governing technology
and is operationally reliable. It has been tested and left the factory in a technically safe and
reliable state.
However, residual hazards remain. Read and adhere to the safety instructions to prevent
hazards of this kind.
ABB accepts no liability for any failure to observe the safety instructions.
2.1 Information and symbols used
The following Instructions point to particular hazards involved in the use of the device or provide
practical instructions:
Danger
Risk of death / serious damage to health
– The respective warning symbol in connection with the signal word "Danger"
indicates an imminently threatening danger which leads to death or serious
(irreversible) injuries.
Warning
Serious damage to health
– The respective warning symbol in connection with the signal word "Warning"
indicates a threatening danger which can lead to death or serious
(irreversible) injuries.
Caution
Damage to health
– The respective warning symbol in connection with the signal word "Caution"
indicates a danger which can lead to minor (reversible) injuries.
Attention
Damage to property
– This symbol in connection with the signal word "Attention" indicates a
situation which could cause damage to the product itself or to objects in its
surroundings.
NOTE
This symbol in connection with the word "Note" indicates useful tips and
recommendations for the efficient handling of the product.
Safety
The following safety symbols are used in the operating manual:
This symbol alerts to electric voltage.
Product manual 9AKK107991A4899
4
│
2.2 Intended use
The device must only be operated within the specified technical data.
The USB-Interface, MDRC is suitable for installation on mounting rails according to DIN EN
60715.
The USB-Interface, MDRC makes the communication of a ABB-free@home
central Twisted Pair line possible.
2.3 Improper use
Each use not listed in Chapter 2.2 “Intended use“ on page 5 is deemed improper use and can
lead to personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the
device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
■
Unauthorized structural changes
■
Repairs
■
Outdoor use
■
Use of available connection options contrary to technical data.
Safety
®
installation and a
Product manual 9AKK107991A4899
5
│
2.4 Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
Safety
Product manual 9AKK107991A4899
6
│
2.4.1 Operation
No special qualifications are needed to operate the device.
2.4.2 Installation, commissioning and maintenance
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts
Safety
Product manual 9AKK107991A4899
7
│
2.5 Safety instructions
Danger - Electric voltage!
Electric voltage! Risk of death and fire due to electric voltage of 100 … 240 V.
Dangerous currents flow through the body when coming into direct or indirect
contact with live components. This can result in electric shock, burns or even
death.
■
Work on the 100 … 240 V supply system may only be performed by
authorised and qualified electricians.
■
Disconnect the mains power supply before installation / disassembly.
■
Never use the device with damaged connecting cables.
■
Do not open covers firmly bolted to the housing of the device.
■
Use the device only in a technically faultless state.
■
Do not make changes to or perform repairs on the device, on its components
or its accessories.
■
Keep the device away from water and wet surroundings.
Caution! - Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
■
Protect the device against humidity, dirt and damage during transport,
storage and operation.
Safety
2.6 Liability and warranty
Improper use, non-observance of this manual, the use of inadequately qualified personnel, as
well as unauthorized modification excludes the liability of the manufacturer for the damages
caused. It voids the warranty of the manufacturer.
Product manual 9AKK107991A4899
8
Loading...