3M™ Spill Management
High
Absorption,
Low Waste
for Smart Spill Control
Solutions for
Workplace Safety
Contents
Why 3M™ Sorbents? 3
Cost Benefits of 3M
Different Types of Sorbents 5
™
3M
Sorbent Formats 6–7
™
3M
Maintenance Sorbents 8–9
™
3M
Oil & Petroleum Sorbents 10–11
™
3M
Chemical Sorbents 12–13
Selecting the Correct 3M
™
3M
Sorbent Ordering Information 15–19
™
Sorbents 4
™
Sorbent 14
2
2
Why 3MTM Sorbents?
Sorbent pioneers
3M pioneered the development of synthetic sorbents while leveraging one of our core technologies. Our sorbents
contain no abrasive granules that can damage expensive equipment. Instead, they are made from microfiber materials,
which contain millions of tiny pockets that absorb and hold liquids. Choose from petroleum (oil-only), maintenance
(for non-aggressive liquids), and chemical (for most aggressive and non-aggressive liquids) formats.
Now more options
3M™ Sorbents are available in high capacity, medium capacity and traditional absorbency so you can select the right product for
the size of your potential spill. These pads and rolls can be wrung out and reused many times with virtually no loss in absorbency.
And we complement our rolls and pads with booms, mini-booms, pillows, drum covers, spill kits and response packs for use with
many types of spills and tasks.
Sustainability
Our high and medium capacity sorbents are lightweight to reduce the volume of waste going into landfill. And 3M™ Sorbents may
be incinerated with very low ash residue. High capacity sorbents contain at least 25 percent recycled content by weight. Medium
capacity sorbents contain at least 50 percent recycled content by weight.
Additional benefits
• 3M’s microbundle technology employs millions of tiny voids to absorb liquid — effectively doubling the capacity of the material
™
Sorbents absorb more so you don’t have to use as much, and create less waste
• 3M
™
Sorbents are made from inert polypropylene and polyester fibers that trap liquid in the voids
• 3M
™
Sorbents are lightweight, non-abrasive and come in many shapes and sizes to perfectly fit your application
• 3M
™
Petroleum Sorbents can be reused; 90 percent of the oil can be wrung out and reclaimed
• 3M
™
High and Medium Capacity Sorbents are made with scrim on one or two sides to help eliminate linting
• 3M
3
3M
Spill Management
Cost Benefits of 3M™ Sorbents
Because of 3M™ Sorbents’ superior absorbency properties, they offer significant cost benefits associated with materials,
labor and disposal.
™
Sorbing a 25 Gallon Spill
NUMBER OF PADS REQUIRED
77 PADS
3M HP-156
Petroleum Sorbent
146 PADS
Competitive Multi-Layer,
Heavy Oil Only Sorbent
POUNDS (LBS) OF SORBENT GOING INTO DISPOSAL
7LBS
3M HP-156
Petroleum Sorbent
25LBS
Competitive Multi-Layer,
Heavy Oil Only Sorbent
7LBS
25LBS
Cost Comparison:
3M™ Sorbents vs. Clay Granules
MATERIALS ESTIMATED FOR CLEANING UP
25 GALLONS OF FLUID
0.77 CASE
3M M-PD1520DD
Sorbent Pads (66 pads)
5.70 BAGS
(50LBS/BAG)
Clay Granules
LABOR TO SORB 182.5 LBS OF OIL
32 MINUTES
Worker Clean-up Time
3M Sorbent
6LBS/MIN
234 MINUTES
Worker Clean-up Time,
Plus Breaks
Clay Granules
2LBS/MIN
189.5LBS
TOTAL
467.5LBS
TOTAL
7LBS
3M Sorbent
DRUMS & DISPOSAL
0.5 DRUM
3M Sorbent & Fluid
1.6 DRUMS
Clay Granules & Fluid
4
285LBS
Clay Granules
Different Types of Sorbents
3M™ Oil & Petroleum Sorbents
• For control and clean-up of
petroleum-based fluids
• Repels water and floats
• For use on land or water
3M™ Chemical Sorbents
• For control and clean-up of most
hazardous liquids
• Resists reactions with most hazardous
chemicals, including acids
• Also absorbs petroleum-based and
aqueous-based solutions
3M™ Maintenance Sorbents
• For control and clean-up of
non-aggressive liquids
• Helps maintain a clean and safe
working environment
• Absorbs petroleum-based liquids
as well as aqueous-based liquids
High Capacity & Medium Capacity Sorbents
3M offers both high or medium levels of absorption capacity to give you the freedom to choose which one is right for your application.
H
High Capacity Sorbents
When you need the most economical and efficient
sorbent design, reach for high capacity sorbents
from 3M. They quickly absorb and hold spilled
liquids for fast and efficient clean up. Added scrim
helps improve product strength. High capacity
sorbents contain at least 25 percent recycled
content by weight.
T
Traditional Sorbents
Proven for decades, 3M’s original low-profile
design offers medium to high absorbent capacity,
depending on your needs.
™
3M
Sorbent Capacity — Pads & Rolls
HIGH
High Capacity
• High loft design
• Scrim increases strength
• >25% recycled content
• Light weight = low waste
Medium Capacity
• Low loft design
• Scrim increases strength
• >50% recycled content
• Lightest weight = lowest waste
Traditional
• Low-profile design
• Original formula
Other Formats
Booms, Mini-Booms,
Pillows, Drum Covers
and Spill Kits are
suitable for use with
all Pads and Rolls.
M
Medium Capacity Sorbents
When cleaning up lower volume spills and
containing everyday drips and small leaks,
medium capacity absorbents are a great choice.
They are designed to help you maintain a clean
and safe working environment and are available
in a variety of convenient formats. Added scrim
helps improve product strength. Medium capacity
sorbents contain at least 50 percent recycled
content by weight.
LOW
5
3M
Spill Management
3M™ Sorbent Formats
3M™ Sorbents are available in a variety of formats so you can choose the one that best fits your situation. Some are for quick clean-up
and recovery. Others contain and help stop the spread of a spill. A few of our formats are better for hard-to-reach areas. And others give
™
™
you the opportunity to use the exact amount of sorbent required. Whatever your application, there is a 3M
need and give you greater peace of mind.
3M™ Sorbent Pads
Conveniently sized pads are ideal for cleaning up small spills and wiping contaminated areas. Pads
are very versatile for getting at hard-to-reach areas. They may also be left on a spill area to soak up
liquids. Scrim increases strength and helps eliminate linting.
3M™ Sorbent Rolls
Use the exact amount of sorbent you need. Sorbent rolls offer the versatility to cut-for-use in small
areas or lay full size on open water, shorelines or discharge streams. Ideal for lining drawers,
covering work benches, protecting areas from overspray or functioning as matting in dirty areas.
Lined with scrim, this product can also be wrung out and reused many times.
Sorbent product to fit your
3M™ Folded Sorbents
Folded sorbents offer the versatility of four formats rolled into one — use as a boom, sheet, pad or
pillow. One product can be stocked for almost any liquid spill. Perforations every 16 inches so you
can select the length of sorbent need to avoid waste. The handy dispenser can be wall mounted
for easy on or off-site use.
Carry Tear Around corner
3M™ Particulate
Particulate materials are used in packaging applications where breakage of a container could
cause a release of hazardous liquid. This material may also be sprinkled over a spill or broadcast
over a large area.
UnopenedUnfold Open
3M™ Oil & Petroleum Sorbents 3M™ Chemical Sorbents
6
3M™ Maintenance Sorbents
3M™ Sorbent Booms
Sorbent booms are used to stop the spread of liquid and are the first line in spill containment. Once
you have booms in place you can use pads, rolls or pillows to recover the spilled liquids. Booms can
be linked together using built-in connectors to deploy them over large areas. UV-resistant, they will
not deteriorate or disintegrate.
3M™ Sorbent Pillows
The pillow format is designed for reaching spilled liquids in hard-to-reach areas such as bilge
pumps, drains, sumps and holding tanks. A scrim encases the particulate sorbent material and
is lightweight and tear-resistant. Perfect for use when you need more capacity than you can get
with a pad.
3M™ Spill Kits & Response Packs
Spill Kits and Response Packs help make sure you have everything you need in one place when
sorbents are needed. The formats vary from a 5 gallon to a 31 gallon kit with a variety of sorbent
products and containment bags enclosed.
3M™ Drum Covers
Our drum cover is designed to be used to catch drips and spills that occur during the dispensing
of all types of non-aggressive materials used in daily operations. It has cut-outs for dispensing
bungs and a skirt which fits neatly around the base to catch any drips that would otherwise end
up on the floor.
3M™ Sorbent Rugs
Sorbent rugs are used in areas where foot and vehicle traffic is an issue. Designed to absorb
liquids while enduring the punishment of heavy walking traffic, our sorbent rugs are durable and
versatile. Different styles are designed for standard industrial maintenance applications or to also
protect the surface below the rug.
7
3M
Spill Management
3M™ Maintenance Sorbents
3M™ Maintenance Sorbents are ideal for absorbing industrial fluids cleanly and efficiently. Made especially for leaks and drips of
non-aggressive fluids, they are lightweight yet long-lasting and absorb up to 25 times their own weight very quickly. These sorbents
are made from inert synthetic fibers, are available in several formats and are dust free. They help reduce the risk of damage to
valuable machinery or contamination of finished products. For a cleaner, safer work environment, keep them on hand where they
are easy to use when needed.
M
H
™
3M™ Maintenance Sorbent Pads and Rolls
The low-profile design of sorbent pads is perfect for placing in, under and around
machines to catch drips. They work well in tight areas, too, when cleaning up small
spills and wiping down oily tools and equipment. Ideal for use in drip pans, these
pads are highly sorbent and non-granular so they will not damage plant equipment.
The most economical way to purchase sorbent, rolls are designed to cover large or
small surfaces since they can be easily cut to fit the need. Ideal for lining drawers,
covering work benches or protecting areas from overspray. They can be wrung out
and reused many times.
™
3M
Maintenance Folded Sorbents
Folded sorbents provide flexibility when cleaning up spills, drips and fluid leaks
since they can be used as a boom, sheet, pillow, pad or roll. Ideal for placing
around equipment and to prevent leaks or spills from spreading to adjacent areas.
™
3M
Maintenance Sorbent Mini-Booms
Mini-booms are ideal for placing around equipment to contain spills and prevent
leaks from spreading to adjacent work areas. Scrim on the outside of the boom
identifies its use while containing particulate sorbent material.
H
8
™
3M
Maintenance Sorbent Drum Cover
This drum cover is designed to catch drips and spills that occur during the
dispensing of all types of non-aggressive materials used in daily operations.
It has cut-outs for dispensing bungs and a skirt which fits neatly around the
base to catch any drips that would normally end up on the floor.
™
3M
Maintenance Sorbent Rug
Sorbent rugs are used in areas where foot and vehicle traffic is an issue. Designed
to absorb liquids while enduring the punishment of heavy foot traffic, our sorbent
rugs are durable and versatile. Different styles work for either standard industrial
maintenance applications or to protect the surface below the rug.
9
3M
Spill Management
3M™ Oil & Petroleum Sorbents
3M™ Petroleum Sorbents are hydrophobic, repel water and are ideal for absorbing oil. They can be used in or outside the plant and
quickly absorb petroleum-based fluids from places where water is present. Made from inert, synthetic fibers, these sorbents are available
in a wide range of formats to enhance spill management and maximize pollution control. They recover oil, not water, so 90 percent of the
absorbed oil can be wrung out and reclaimed. These sorbents are lightweight, dust free and extremely absorbent to minimize both cost
and waste disposal.
T
™
™
3M
Oil & Petroleum Sorbent Pads and Rolls
These pads and rolls absorb hydrocarbon-based liquids and repel
aqueous-based liquids.
Reusable, conveniently-sized pads are perfect for cleaning up small oil or petroleum
spills and wiping contaminated areas. They may also be used on work surfaces in
anticipation of a spill.
M
H
The roll product offers the versatility to cut-for-use in small areas or lay full size on
open waters, shorelines or discharge streams. Ideal for lining drawers, covering work
benches or protecting areas from overspray. Can be wrung out and reused many times.
™
3M
Oil & Petroleum Folded Sorbents
Enjoy four sorbents in one with this versatile, folded product that absorbs
hydrocarbon-based liquids and repels aqueous-based liquids to help you recover oil,
not water. Use as a boom, pillow, pad or roll. Perforations every 16 inches allow you to
select the length you need. Each handy dispenser shows suggestions for sorbent use.
™
3M
Oil & Petroleum Sorbent Booms
These sorbent booms are used to stop the spread of liquids and are the first line in
spill containment. Unlike non sorbent-containment booms, ours absorb oil as they help
contain it. Booms can be linked together by built-in connectors to deploy over large
areas. UV-resistant, they will not deteriorate or disintegrate. Designed for long-term
use in ditches, streams, rivers, lakes, docks and piers.
H
Double booms feature a unique, double-cylinder design to maximize absorption and
minimize the escape of oil traces in flowing water. Constructed to be more rigid for
easier handling and to make it easier to turn them over for maximum saturation.
10
™
3M
Oil & Petroleum Sorbent Mini-Booms
Mini-booms quickly prevent leaks and spills from spreading to adjacent areas.
They’re ideal for placement around equipment to prevent damage. Scrim on the
outside contains the particulate sorbent material and identifies its use. Available
in three lengths.
™
3M
Oil & Petroleum Sorbent Pillows
These open mesh bags are designed with a scrim that encases particulate
sorbent. Excellent for handling large quantities of light oil in confined spaces,
they are UV-resistant and will not deteriorate or sink.
™
3M
Oil & Petroleum Spill Kits & Response Packs
3M™ Oil & Petroleum Spill Kits and Response Packs are available in a range
of durable, weatherproof containers that can be quickly and easily deployed
in case of an oil or fuel spill. These kits contain a variety of oil and petroleum
sorbents with varying absorbency capacities to suit different workplace needs.
Containment bags and ties are included.
11
3M
Spill Management
3M™ Chemical Sorbents
3M™ Chemical Sorbents are the ideal solution for hazardous spill control. Available in a wide range of formats including spill kits, they
are suitable for absorbing chemical liquids — even aggressive acids and alkalis. These hard-working sorbents are convenient and
rapid to deploy, a major consideration in an emergency. Keep them on hand near areas where chemical spills are a potential risk.
T
M
H
™
3M™ Chemical Sorbent Pads and Rolls
Reusable, conveniently-sized pads resist reactions with most hazardous
chemicals and will absorb petroleum-based fluids, non-aggressive chemicals and
aqueous-based solutions. They are perfect for cleaning up small spills and wiping
contaminated areas. Pads may also be used on work surfaces in anticipation of a
spill and are conveniently sized and packaged in a dispenser box.
The most economical way to purchase sorbents, the roll product offers the
versatility to cut-for-use in small areas or lay down full size for larger spills. Ideal
for lining drawers, covering work benches or protecting areas from overspray,
they can be wrung out and reused many times.
™
3M
Chemical Folded Sorbents
Made from chemically inert polypropylene material, these folded sorbents
work well with chemicals such as acids and bases as well as aqueous or
hydrocarbon-based fluids. Ideal for placement around hazardous liquid spills to
help prevent spreading. Use as a boom, pillow, pad or roll. Perforations every
16 inches allow you to select the length you need. Each handy dispenser shows
suggestion for sorbent use.
H
12
™
3M
Chemical Sorbent Mini-Booms
These mini-booms are ideal for placing around hazardous liquid spills to prevent
them from spreading. They work quickly so you have time to ensure proper
clean-up while minimizing employee exposure. Ideal for placement around
equipment to prevent damage. Scrim on the outside contains the particulate
sorbent material and identifies its use. Available in three lengths.
™
3M
Chemical Sorbent Pillows
Ideal for placement at the source of a leak or they can be thrown into a contained
spill. These sorbent pillows are small, lightweight, tear-resistant and feature a
high capacity for holding liquid.
™
3M
Chemical Spill Kits & Response Packs
3M™ Chemical Spill Kits and Response Packs help make sure you are ready with
everything you need should a spill occur. They come in a range of containers
and packs that can be quickly deployed in an emergency situation. A selection
™
Chemical Sorbents of varying formats is included, as are cleanup bags.
of 3M
13
3M
Spill Management
Selecting the Correct 3M™ Sorbent
™
SELECTION GUIDE
HYDROCARBON OILS
Fuels, Petrol, Diesel, Motor Oil
WATER SOLUBLE OILS
Hydraulic Fluids, Cutting Fluids
MINERAL OILS
HYDROCARBBON SOLVENTS
Mineral Spirits, Xylene, Toluene, Turpentine, Degreaser
COOLANTS/HEAT TRANSFER FLUIDS
Ethers, Glycols
PAINTS
ALCOHOLS
Ethanol, Methylated Spirits
CHLORINATED SOLVENTS
Methylene Chloride, Chloroform
MAINTENANCE SORBENT
For use on land
\
OIL SORBENT
For use on land and water
CHEMICAL SORBENT
For use on land
DILUTE ACIDS
Hydrochloric Acid, Hydrofluoric Acid, Sulphuric Acid
DILUTE ALKALIS
Sodium Hydroxide
AGRICULTURAL CHEMICALS
Pesticides, Weedicides, Herbicides
CONCENT RATED ACIDS/ALKALIS
3M Specialist Recommendation
Alternate Selection
Call 3M Technical Assistance
14
3M
™
Sorbent Ordering Information
Marketplace Product Name and Number
UPC and SKU
CHEMICAL SORBENT PADS
™
Chemical Sorbent Pad P-110
3M
50051138175936
70070189280
™
Chemical Sorbent Pad C-PD914DD
3M
50051138290967
70070408235
™
Chemical Sorbent Folded C-FL550DD/P-F2001
3M
50051138464962
70070708030
™
Chemical Sorbent Pad Medium Capacity MCC
3M
50051125858620
70071659257
CHEMICAL SORBENT ROLLS
™
Chemical Sorbent Roll C-RL15150DD
3M
50051138290979
70070408243
™
Chemical Sorbent Roll C-RL38150DD
3M
50051138290986
70070408250
™
Chemical Sorbent Roll Medium Capacity MCC
3M
50051125858651
70071659281
™
Chemical Sorbent Roll Medium Capacity MCC
3M
50051125858682
70071659315
T
•
H
•
H
•
M
•
H
•
H
•
M
•
M
•
Dimensions
Absorption
Capacity
11" x 13"/box
17 gallons/case
9.25" x 14.5"/box
23.5 gallons/case
5" x 50'/box
10.5 gallons/box
31.5 gallons/case
17" x 15"/box
18 gallons/case
15.25" x 150'/box
31 gallons/case
38" x 150'/box
76 gallons/case
15" x 150'/box
19 gallons/case
25" x 150'/box
30 gallons/case
Quantity
6565 200 pads/case
6565 150 pads/case
6564 3 boxes/case
100 pads/case
6566 1 roll/case
6566 1 roll/case
1 roll/case
1 roll/case
CHEMICAL SORBENT BOOMS
™
Chemical Sorbent Mini-Boom P-200
3M
50051138175967
70070189314
™
Chemical Sorbent Mini-Boom P-208
3M
50051138213430
70070221307
™
Chemical Sorbent Mini-Boom P-212
3M
50051138213447
70070221315
CHEMICAL SORBENT PILLOWS
™
Chemical Sorbent Pillow P-300
3M
50051138175974
70070189322
H
High Capacity Sorbent
T
Traditional Sorbent
M
Medium Capacity Sorbent
3" x 4'/boom
1 gallon/boom
12 gallons/case
3" x 8'/boom
2 gallons/boom
12 gallons/case
3" x 12'/boom
3 gallons/boom
12 gallons/case
7" x 15"/pillow
0.5 gallon/pillow
8 gallons/case
12 booms/case
6 booms/case
4 booms/case
16 pillows/case
15
3M
™
Sorbent Ordering Information
Marketplace Product Name and Number
UPC and SKU
CHEMICAL SORBENT PARTICULATE
™
Chemical Sorbent Particulate P-500
3M
50051138175986
70070189330
CHEMICAL SORBENT SPILL RESPONSE KITS & PACK
™
Chemical Sorbent Folded Spill Kit C-SKFL31
3M
50051138462871
70070611804
™
Chemical Sorbent Folded Spill Kit C-SKFL5
3M
50051131071754
70070611812
™
Chemical Sorbent Spill Response Pack SRP-CHEM
3M
50051138289107
70070317188
MAINTENANCE SORBENT PADS
™
Maintenance Sorbent Pad M-PD1520DD/M-A2002
3M
50051131071648
70070408755
™
Maintenance Sorbent Production Pad M-PD720GG
3M
50051131071655
70070405876
™
Maintenance Sorbent Folded M-FL550DD/M-F2001
3M
50051131071723
70070408771
™
Maintenance Sorbent Pad Medium Capacity MCM
3M
50051125858637
70071659265
H
•
H
•
H
•
M
•
Dimensions
Quantity
Absorption Capacity
12 lbs. chopped/bag
14 gallons/bag
20 gallon drum
31 gallons
5" x 26'/box
5 gallons/roll
15 gallons/case
Pack
3.5 gallons/pack
10.5 gallons/case
15.5" x 20.5'/box
37.5 gallons/case
7.5" x 20.5"/box
31.5 gallons/case
5" x 50'/box
10.5 gallons/box
31.5 gallons/case
17" x 15"/box
18 gallons/case
6565 1 bag/case
6566 1 kit/case
6566 3 kits/case
3 packs/case
100 pads/case
100 pads/case
3 boxes/case
100 pads/case
MAINTENANCE SORBENT ROLLS
™
Maintenance Sorbent Roll M-RL15150DD/M-B2001
3M
50051131071662
70070408748
™
Maintenance Sorbent Roll M-RL38150DD/M-B2002
3M
50051131071679
70070408730
™
Maintenance Sorbent Roll Medium Capacity MCM
3M
50051125858675
70071659307
™
Maintenance Sorbent Roll Medium Capacity MCM
3M
50051125858705
70071659331
H
High Capacity Sorbent
T
Traditional Sorbent
M
Medium Capacity Sorbent
16
H
•
H
•
M
•
M
•
15.5" x 150'/roll
31 gallons/case
38" x 150'/roll
76 gallons/case
15" x 150'/roll
19 gallons/case
25" x 150'/roll
30 gallons/case
1 roll/case
1 roll/case
1 roll/case
1 roll/case
Marketplace Product Name and Number
UPC and SKU
MAINTENANCE SORBENT BOOMS
™
Maintenance Sorbent Mini-Boom M-MB304
3M
50051138215267
70070313559
™
Maintenance Sorbent Mini-Boom M-MB308
3M
50051138215274
70070313567
™
Maintenance Sorbent Mini-Boom M-MB312
3M
50051138215281
70070313575
MAINTENANCE SORBENT PILLOWS
™
3M
Maintenance Sorbent Pillow M-PL715
50051138215311
70070313609
MAINTENANCE SORBENT DRUM COVERS
™
Maintenance Sorbent Drum Cover M-DC22DD
3M
50051131071693
70070408722
Dimensions
Absorption
Capacity
3" x 4'/boom
1 gallon/boom
12 gallons/case
3" x 8'/boom
2 gallons/boom
12 gallons/case
3" x 12'/boom
3 gallons/boom
12 gallons/case
7" x 15"/pillow
0.5 gallon/pillow
8 gallons/case
22" cover
19 gallons/case
Quantity
6565 12 booms/case
6565 6 booms/case
6564 4 booms/case
6566 16 pillows/case
25 covers/case
MAINTENANCE SORBENT RUGS
™
Maintenance Sorbent Rug M-RG36300E
3M
00051138290023
70070406247
™
Maintenance Sorbent Rug M-RGC36100E
3M
00051138290030
70070406239
PETROLEUM SORBENT PADS
™
Petroleum Sorbent Pad HP-156
3M
50051138289916
70070405785
™
Petroleum Sorbent Pad HP-157
3M
00051138291167
70070408557
™
Petroleum Sorbent Pad HP-255
3M
50051138289923
70070405793
H
•
H
•
H
•
36" x 300'/rug
32 gallons/case
36" x 100'/rug
10.5 gallons/case
17" x 19"/pad
37.5 gallons/case
34" x 38"/pad
75 gallons/case
17" x 19"/pad
33 gallons/case
1 rug/case
1 rug/case
100 pads/case
50 pads/case
50 pads/case
PETROLEUM SORBENT PADS CONTINUED ON PAGE 18
17
3M
™
Sorbent Ordering Information
Marketplace Product Name and Number
UPC and SKU
PETROLEUM SORBENT PADS (CONTINUED)
™
Petroleum Sorbent Pad T-151
3M
00021200160493
98071101970
™
Petroleum Sorbent Pad T-156
3M
00021200160509
98071101988
™
Petroleum Sorbent Pad T-157
3M
00021200160516
98071107563
™
Petroleum Sorbent Static Resistant Pad HP-556
3M
00051138290689
70070407880
™
Petroleum Sorbent Static Resistant Pad HP-557
3M
00051138290696
70070407898
™
Petroleum Sorbent Folded P-FL550DD/T-F2001 (AAD)
3M
50051131071730
70070708063
™
Petroleum Sorbent Pad Medium Capacity MCP
3M
50051125858644
70071659273
T
•
T
•
T
•
H
•
H
•
H
•
M
•
Dimensions
Absorption
Capacity
17" x 19"/pad
43.5 gallons/case
17" x 19"/pad
40.5 gallons/case
34" x 38"/pad
81 gallons/case
17" x 19"/pad
37.5 gallons/case
34" x 38"/pad
75 gallons/case
5" x 50'/box
10.5 gallons/box
31.5 gallons/case
17" x 15"/pad
18 gallons/case
Quantity
200 pads/case
100 pads/case
50 pads/case
100 pads/case
50 pads/case
3 boxes/case
100 pads/case
PETROLEUM SORBENT ROLLS
™
Petroleum Sorbent Roll HP-100
3M
00051138289904
70070405777
™
Petroleum Sorbent Roll T-100
3M
00021200160479
98071101913
™
Petroleum Sorbent Roll T-190
3M
00051138216481
70070316024
™
Petroleum Sorbent Static Resistant Roll HP-500
3M
00051138290672
70070407872
™
Petroleum Sorbent Roll Medium Capacity MCP
3M
50051125858668
70071659299
™
Petroleum Sorbent Roll Medium Capacity MCP
3M
50051125858699
70071659323
H
High Capacity Sorbent
T
Traditional Sorbent
M
Medium Capacity Sorbent
H
•
T
•
T
•
H
•
M
•
M
•
38" x 144'/roll
73 gallons/case
38" x 144'/roll
84 gallons/case
19" x 144'/roll
42 gallons/case
38" x 144'/roll
73 gallons/case
15" x 150'/box
19 gallons/case
25" x 150'/box
30 gallons/case
1 roll/case
1 roll/case
1 roll/case
1 roll/case
1 roll/case
1 roll/case
18
Marketplace Product Name and Number
UPC and SKU
PETROLEUM SORBENT BOOMS
Dimensions
Quantity
Absorption Capacity
3M™ Petroleum Sorbent Double Boom T-270
50021200160542
98071106334
™
Petroleum Sorbent Double Boom T-280
3M
00021200160851
98071108074
™
Petroleum Sorbent Mini-Boom T-8
3M
50051138213553
70070221372
™
Petroleum Sorbent Mini-Boom T-12
3M
50051138213560
70070221380
™
Petroleum Sorbent Mini-Boom T-4
3M
50051138213546
70070221364
PETROLEUM SORBENT PILLOWS
™
3M
Petroleum Sorbent Mini-Pillow T-30
50051138215458
70070313963
™
Petroleum Sorbent Pillow T-240
3M
00021200160530
98071101996
™
Marine Oil and Fuel Absorbent Bilge Pillow
3M
50051138290264
70070406981
8" x 10'/boom
20 gallons/boom
80 gallons/case
(2) 4" x 10'/booms
10 gallons/boom
80 gallons/case
3" x 8'/boom
2 gallons/boom
12 gallons/case
3" x 12'/boom
3 gallons/boom
12 gallons/case
3" x 4'/booms
1 gallon/boom
12 gallons/case
7" x 15"/pillow
0.5 gallon/pillow
8 gallons/case
5" x 14" x 25"/pillow
3.5 gallons/pillow
35 gallons/case
7" x 15"/pillow
0.5 gallon/pillow
8 gallons/case
4 booms/case
4 booms/case
6 booms/case
6565 4 booms/case
6565 12 booms/case
16 pillows/case
10 pillows/case
16 pillows/case
PETROLEUM SORBENT DRUM COVERS
™
Petroleum Sorbent Drum Cover P-DC22DD
3M
50051138292343
70070515948
PETROLEUM SORBENT SWEEP
™
Petroleum Sorbent Sweep T-126
3M
00021200160486
98071101962
PETROLEUM SORBENT SPILL RESPONSE KITS & PACKS
™
Petroleum Sorbent Spill Kit P-SKFL31
3M
00051138462864
70070611796
™
Petroleum Sorbent Spill Kit P-SKFL5
3M
50051138462890
70070611820
™
Petroleum Sorbent Spill Response Pack SRP-PETRO
3M
50051138289503
70070317840
22" cover
19 gallons/case
21" x 100'/box
25 gallons/case
20 gallon drum
31 gallons/case
15" x 26'/box
5 gallons/roll
15 gallons/case
Pack
4 gallons/pack
12 gallons/case
25 covers/case
1 box/case
1 kit/case
3 kits/case
3 packs/case
19
To speak to a technical support person, call 1-800-626-8578.
For general assistance, call 1-800-3M-HELPS.
Important Notice to Users
Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are
reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and per formance of a 3M product in a par ticular application.
Given the variety of factor s that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fi t for user’s
particular purpose and suitable for user’s method of application.
Warranty and Limited Remedy: 3M warrants that each 3 M product will be free from defects in material and manufacture for 90 days from the date of purchase from 3M’s authorized
distributor. 3M MA KES NO OTH ER EXPRESS OR IMPL IED WA RR ANTIES, INC LUDING ANY IMPLIED WARRA NT Y OF MERCHANTABILITY OR FITNES S FOR A PA RTICUL AR PURPOSE.
If a 3M product does not conform to this warrant y, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or
consequential, regardless of the legal theory asserted.
3M Commercial Solutions
3M Center Building 220-12E-04
St. Paul, MN 55144-1000
www.3M.com/floorsafety
3M is a trademark of 3M Company. Used under license in Canada.
© 3M 2015. All rights reserved. 78-8134-0633-3 Rev. A
Loading...