3M 812 Owner's Manual
Conversion Station
Model 812
Owner’s Manual
3M Library Systems
3M Center, Building 225-4N-14
St. Paul, Minnesota 55144-1000
www.3m.com/library
Copyright © 2006, 3M. All rights reserved.
78-8129-2472-4_A
3M is a trademark of 3M.
Table of Contents
Conversion Station.................................................................................... 1
Model 812.................................................................................................. 1
Safety Information .................................................................................... 2
Intended use....................................................................................................................................2
Safety Label Locations ..................................................................................................................4
Regulatory compliance............................................................................. 5
EMC compliance USA and Canada...............................................................................................5
Industry Canada radio frequency rules and regulations............................................................5
Specifications ........................................................................................... 6
Components .............................................................................................. 7
Adjusting the Monitor and Scanner.......................................................... 8
Using the Tag Dispenser........................................................................... 9
Automatic Tag Dispenser components........................................................................................9
Operator tool kit............................................................................................................................10
Loading the tag dispenser with tags ..........................................................................................11
Cleaning the tag dispenser opening...........................................................................................13
Cleaning the spring plate (tensioner/guide) ..............................................................................13
Troubleshooting Tag Dispenser problems................................................................................14
Service .................................................................................................... 15
3M Service phone numbers.........................................................................................................15
In the United States...................................................................................................................15
In Canada ..................................................................................................................................15
In other countries.......................................................................................................................15
To order tags.................................................................................................................................15
Tag types...................................................................................................................................15
Phone numbers .........................................................................................................................15
1
Safety Information
Read, understand, and follow all safety information contained in these
instructions prior to installation and use of the 3M™ Conversion
Station Model 812. Retain these instructions for future reference.
Intended use
The 3M Conversion Station Model 812 is intended for use in converting
library items that use optical barcode technology to RFID technology using
3M™ RFID Tags.
The Model 812 is designed and intended for use in an indoor library
environment. It has not been evaluated for other uses or locations.
EXPLANATION OF SIGNAL WORD CONSEQUENCES
DANGER:
WARNING:
CAUTION:
CAUTION:
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS
Indicates a potentially hazardous situation, which, if not avoided, will
result in death or serious injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.
Attention: Read accompanying
documentation
Warning: Risk of Electric Shock
Warning: Not a Step
2
Caution: Mercury disposal hazard
WARNING
To reduce the risk associated with hazardous voltage:
Do not attempt to modify or repair — no user serviceable parts inside — contact 3M Service for
repair.
To reduce the risk associated with back strain related injury:
Follow safe lifting procedures.
To reduce the risk associated with a fall or machine tipping related injury:
Do not step or lean on any part of the Conversion Station.
CAUTION
To reduce the risk associated with eye related injury:
Do not look directly into laser scanner device;
At the end of service life, dispose of the laser scanner in accordance with federal, state and lo cal
requirements.
To reduce the risk associated with environmental contamination related
injury:
The Conversion Station contains a lithium battery, mercury in the monitor/display, and circuitry
that contains lead in the solder. At the end of service life, dispose of the Conversion Station in
accordance with federal, state and local requirements.
IMPORTANT NOTES
Do not bend, fold, or damage the RFID tag in any way.
Such damage increases the likelihood of premature tag failure.
If you receive a system message indicating that a tag cannot be programmed, that tag may be
defective. Ask your conversion coordinator where to put any tags that are suspected of being un-
programmable.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following statement for
products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser light exposure.
3
Safety Label Locations
BACKLIGHT CONTAINS MERCUR Y,
DISPOSE ACCORDING TO LOCAL,
STA TE, AND FEDERAL LA WS
LASER APERTURE
78-8126-7519-3
100-240V~
50/60Hz
12AMAXLOAD
3MLibrarySystems
Library Systems
St.Paul,Minnesota55144
St.
I.T.E.LISTED
ACCESSORY
4P24
N1108
3
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference r eceived, including interference
that may cause undesired operation.
78-8126-7519-3
100-240V~
50/60Hz
12AMAXLOAD
3MLibrarySystems
Library Systems
St.Paul,Minnesota55144
St.
This Class A digital apparatus meets all requirements of the Canadian
I.T.E.LISTED
ACCESSORY
Interference-Causing Equipment Regulations.
4P24
Cet appareil numerique de la classe A respecte toutes les exigences du
N1108
Reglement sur le materiel brouilleur du Canada.
3
21 CFR Subchapter J,
IEC 60825-1:1997
812_OM_001_labels
and EN 60825-1:1996
4
Loading...