3com Getting Started with Palm Dialer Service Manual
Palm Dialer Application (NBXDialer)
The Palm Dialer application is included on the Resource Pack CD. You can look up a telephone
number in the Palm Address Book application and then use the Palm Dialer application to place a
call to that number. Call commands are transferred from the Palm organizer to the NBX Model
2102-IR Business Telephone (a prerequisite) through the phone’s infrared port.
Prerequisites
The Palm Dialer software has been tested on:
• Palm V running Palm OS 3.1
• Palm Vx running Palm OS 3.5
• Palm IIIe running Palm OS 3.1.1
The application may run on other Palm devices that have not yet been tested, provided that the
Palm has an infrared port and is running Palm operating system version 3.0 or higher.
Installing the Palm Dialer Application
To install the Palm Dialer Application:
1. Load the Resource Pack CD into the CD drive on your PC or laptop computer.
2. Locate the file palmdial.prc in the Win directory on the Resource Pack CD.
3. Place a copy of this file in any folder on your computer’s hard disk drive.
4. Launch the Palm Desktop application on your PC or laptop computer.
5. Click Add.
6. Browse to the location of the palmdial.prc file, and select the file.
7. Click OK. The next time that you run HotSync to synchronize your Palm organizer with your
PC or laptop, the Palm Dialer application is loaded onto your Palm organizer.
3Com Palm Dialer Application (NBXDialer)
Configuring Application Program Parameters
To configure the Palm Dialer application, in the menu list, select Preferences. Configure the
following parameters:
Outside Line Prefix: Default = 9 (modify as necessary)
Long Distance Prefix: Default = 1 (modify as necessary)
Park Ranges: Enter the lowest and highest extension to define the range. The default for
the NBX 100 is 601-609 for a 3-digit plan, or 6001-6009 for a 4-digit plan.
The default for the V5000 is 600 through 619 for a 3-digit dial plan, or
6000 through 6099 for a 4-digit plan. (Modify to conform to your NBX
system’s dial plan.)
Feature Button: For the telephone you are using, enter the code for the telephone button
that is currently programmed as that telephone’s Feature button. The
default for NBX Business Telephones is AB1.
Commands
The following commands are available:
Place Call Place internal, external, local, long distance, and international calls.
Hangup Terminate the current call.
Redial Redial the most recently dialed telephone number.
Blind Conference Blind conference a telephone into the current call.
Blind Transfer Blind transfer the current call to another telephone.
Hold Place the current call on hold. Note: If you place a call on hold from the
Palm, you must press the line appearance button on the NBX telephone
to unhold the call.
Park Select a park extension from the range of extensions defined in
Preferences and park the current call on that park extension. This
command depends on the proper specification of the Feature Button in
Preferences.
Forward Call to VM Forward a call to voicemail. This command depends on the proper
specification of the Feature Button in Preferences.
Starting the Palm Dialer Application
After you install the application, select NBXDialer to run it.
Copyright 2001, 3Com Corporation. All rights reserved. Unless otherwise indicated, 3Com registered trademarks are registered in the United States and
may be registered in other countries. 3Com, NBX, and SuperStack are registered trademarks and the 3Com logo and NetSet are trademarks
of 3Com Corporation. Other brand and product names may be registered trademarks or trademarks of their respective holders.
Rev PalmDialer 22-MAR-01
Loading...