The Multi Photo Feeder (part number B12B813372) lets you
load up to 24 photos or business cards and scan them
automatically. See the on-screen Reference Guide for
instructions.
Cable
Output tray
Edge guides
Scanner Specifications
Basic Specifications
Scanner typeFlatbed, color
PhotoelectricColor CCD line sensor
device
Effective pixels20,400 × 28,080 pixels at 2400 dpi
Document size8.5 × 1.7 inches (216 × 297 mm)
Letter size or A4 (reading area can
be specified from software)
Power19.0 W operating (with AFL)
consumption13.0 W standby mode
5.5 W sleep mode (with AFL)
Environmental
TemperatureOperation: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
HumidityOperation: 10 to 80%
(withoutStorage: 10 to 85%
condensation)
OperatingOrdinary office or home conditions.
conditionsExtreme dust should be avoided. Operation
under direct sunlight or near a strong light
source should be avoided.
Safety Approval
EMCFCC Part 15 Subpart B Class B
CSA C108.8 Class B
Scanning and Restoring Photos
If you have faded photos, slides, or negatives, you can use the
Color Restoration setting in your software to bring them back
to life.
Start EPSON Scan and select
Mode
in the Mode box at the top of the screen.
Select your settings and click the
of the screen.
Select the
the
Color Restoration checkbox. (In Home Mode, click
Image Adjustments button first. In Professional Mode,
scroll to the bottom of the screen.)
Color Restoration
checkbox
Home Mode or Professional
Preview button at the bottom
Mode box
USB Interface
Interface typeUniversal Serial Bus Specification
Revision 2.0
Electrical standard Full Speed mode (12 Mbits/s) and
Hi-Speed mode (480 Mbits/s) of Universal
Serial Bus Specification Revision 2.0.
Connector typeOne receptacle (Type B)
Transparency Unit
Supplied voltageDC 24.0 to 26.4 V
Rated current0.5 A
35 mm film types Strip: two to six 35 mm frames
Readable width × length:
1.142 × 9.134 inches (29 × 232 mm)
Slide: one 35 mm slide
AC Adapter
InputAC 100 to 120 V, 50 to 60 Hz
OutputDC 24.0 to 26.4 V, 1.4 A
Temperature41 to 95 °F (5 to 35 °C)
For detailed steps, see the on-screen Reference Guide.
Note: You can also use the Color Restoration feature in the EPSON
Smart Panel copy utility. See the on-screen help in the copy utility for
details.
2 - Epson Perfection 2580 Photo6/04
Epson Perfection 2580 Photo
Using EPSON Smart Panel
To open EPSON Smart Panel, press the ] Start button on
your scanner or select
Note: In Windows, if you see a message when you press the ] Start
button, select EPSON Smart Panel, click Always use this program for this action, then click OK.
Epson Smart Panel opens on your computer.
For details on using EPSON Smart Panel, click the
EPSON Smart Panel on your desktop.
? button.
Scanning Film and Slides
The top of the Perfection 2580 Photo scanner cover has an
automatic film loader that lets you load 35 mm negatives
without even opening the cover. You can use the slide holder to
scan a 35 mm slide from the scanner glass.
Tip: Make sure your negatives or slides are dustfree for the best scan. You can also select the Dust
Removal setting in EPSON Scan to improve your scan.
Before scanning negatives or a slide, lift the scanner cover all the
way up and slide the reflective document mat up and off of the
scanner cover.
Note: Make sure the transparency unit cable is connected to the back
of the scanner.
Scanning 35 mm Negatives
1. Close the scanner cover.
2. Press and release the back of the auto film loader cover to
open it.
6/04Epson Perfection 2580 Photo - 3
Epson Perfection 2580 Photo
3. Flip out the metal film guide and press it down until it
clicks into place.
Caution: Before loading a film strip, make sure it contains at
least 2 photos, but no more than 6. Don’t load folded, creased,
curled, or sticky film into the auto film loader or it may damage
the film or your scanner.
4. Place the film strip in the film loader with the shiny base
side facing down. Your images and any wording on the film
strip should appear backward on the side that faces up.
7. When you finish scanning the film strip, press the
Eject
button inside the auto film loader to eject the film. Wait for
the ] Start light to stay on green, then remove the film
strip.
Caution: Don’t turn off the scanner with a film strip loaded in the
auto film loader. Never pull film out of the loader by force.
8. Flip the film guide back inside the auto film loader and
press it down until it clicks into place.
9. Close the auto film loader cover.
5. Slowly slide the film into the loader. Let go of the film when
the scanner begins to automatically feed it into position.
6. To scan each frame in your film strip as a separate image,
press the 4 Scan and Save button or open EPSON Smart
Panel and select
Scan and Save. This scans each frame
using ideal settings in Full Auto Mode and opens each one
separately in ArcSoft PhotoImpression for viewing, editing,
and printing. See your on-screen Reference Guide and Smart
Panel help for instructions on selecting scan modes and
complete scanning details.
10. Replace the document mat before you resume scanning
reflective (paper) documents.
Scanning a Slide
1. Make sure you removed the reflective document mat, as
described in the previous column.
2. Place the slide holder on the top of the scanner glass so that
the tab labelled “D” fits into the area labelled “D” on the
document table.
4 - Epson Perfection 2580 Photo6/04
Epson Perfection 2580 Photo
3. Place a 35 mm slide into the holder with its shiny base side
facing down. Your image should appear backwards on the
side that faces up.
Place the top of the image toward the left side of the
scanner.
4. Close the scanner cover.
5. To scan your slide, press the 4 Scan and Save button or
open EPSON Smart Panel and select
Scan and Save. This
scans your slide using ideal settings in Full Auto Mode and
opens it in ArcSoft PhotoImpression for viewing, editing,
and printing. See your on-screen Reference Guide and Smart
Panel help for instructions on selecting scan modes and
complete scanning details.
6. When you’re finished scanning, you can store the slide
holder in the scanner cover. Slide the holder into the cover,
then replace the document mat.
Start Light
The scanner’s ] Start light indicates the scanner status.
] Start lightScanner status
Flashing greenWarming up or scanning.
GreenReady to scan.
Flashing redMake sure the transportation lock is unlocked.
Try restarting your computer and unplugging the
scanner. Wait 10 seconds, then plug the scanner
back in.
Film may be jammed in the auto film loader.
Disconnect the scanner from the computer, wait
10 seconds, and connect it to the computer again
to see if the film ejects on its own. If film is still
jammed, see your on-screen Refere nce Guide.
If the red light is still flashing, contact your dealer
or Epson.
OffMake sure your scanner is connected to your
computer and plugged into a power source.
Transporting the Scanner
Before transporting the scanner for a long distance or storing it
for an extended period of time, you need to lock the scanner’s
carriage to prevent damage.
1. Plug in the scanner, connect it to your computer, and wait
until the carriage moves to the home position (position
nearest the buttons). While the
] Start light is green,
unplug the scanner.
2. If the cover cable is attached, disconnect it.
6/04Epson Perfection 2580 Photo - 5
Epson Perfection 2580 Photo
3. To lock the transportation lock, lift the scanner and slide
the lock to the locked position. This secures the carriage.
Caution: Do not turn the scanner over; this may damage it.
4. Attach the protective materials and repack the scanner in its
original box.
Related Documentation
CPD-17962Epson Perfection 2480/2580 Photo
Start Here sheet
CPD-17964Epson Perfection 2480/2580 Photo
Scanner Software CD-ROM
CPD-17965Epson Perfection 2480/2580 Photo
Notices booklet
—Epson Perfection 2480/2580 Photo
Reference Guide (HTML)
6 - Epson Perfection 2580 Photo6/04
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.