c^rtens ®
Series
Riding Mower
Parts
Manuai
PRINTED IN USA |
PART NO. 027551C |
8-95 |
Your Ariens Dealer will be happy to supply any service or advice which may be required to keep your Ariens equipment operating at peak efficiency. He stocks genuine Ariens parts and lubricants, manufactured with the same precision and skill as the original equipment. His factory trained staff is kept well informed on the best methods of servicing Ariens equipment and is ready and able to serve you. If
engine repairs or service are required, they can be obtained from an Ariens Dealer or from an authorized engine manufacturer’s service center. If service is required, be prepared to supply the service person with the Model Number and Serial Number of the equipment and engine, as well as a full description of the problem encountered.
The Information contained herein is intended for use by Ariens Dealer’s trained servicemen and serves as a supplement to and reminder of training sessions conducted by Ariens Company. Before you attempt any repair, adjustment or maintenance project, be certain that you have read and fully understand the instructions in your Owner’s and Repair Manuals. Understand and follow each Danger, Warning, Caution and all instructions exactly as given. Also be sure that you have all tools, replacement parts and other materials required to complete the project.
A network of Ariens Dealers and Distributors is maintained in order to assure you of an adequate supply of replacement parts and technical assistance. Your local Ariens Dealer is required to order parts through his distributor. When replacement parts are required, use only genuine Ariens parts. Failure to do so may result in product malfunction and possible injury to operator and/or bystander.
NOTE: All references to “Left”, “Right”, “Front” and “Rear^’ are given from operator’s position.
NOTE: The descriptions and specifications contained in this manual were in effect at the time the manual was approved for printing. Ariens Company reserves the right to discontinue models without notice and without incurrying obligation. The equipment described within this manual may not be identified as either standard or optional and the various illustrations may not all be applicable to your particular unit. If you have questions, always check with your Ariens Dealer.
NOTE TO ARIENS DEALERS: Refer to your current Parts Price List for suggested parts stocking. Service training for dealers is available at the Ariens Service School. See your Ariens Distributor for the latest school.
This Parts Manual is arranged for easy identification of genuine Ariens Service parts that are illustrated showing their relationship to one another. Item numbers In the illustrations correspond to item numbers in the first column of the parts list and are followed by the Ariens Part Number, Description and Quantity with variations between models and/or serial numbers designated in the part description. S/N 000000> means this serial number and up with S/N <000000 meaning up to this serial number.
Order parts from your nearest authorized Ariens Dealer. For prompt service when ordering parts, provide the following information.
Contents |
|
Decals....................................................................... |
2 |
Electrical ................................................................... |
4 |
Frame and Seat........................................................ |
6 |
Steering..................................................................... |
8 |
Speed Selector ....................................................... |
10 |
Brake and Clutch.................................................... |
12 |
Engine and Belts..................................................... |
14 |
Rear Axle................................................................ |
16 |
Gear Case............................................................... |
18 |
Mower Height Linkage............................................ |
20 |
Mower Engagement Linkage.................................. |
22 |
Mower Pan ............................................................. |
24 |
Mower Spindle........................................................ |
26 |
This manual covers the models listed. Specific Model and Serial Numbers of your unit and attachment are on a label on the unit. Record these numbers in the space provided and use them whenever parts or service are required.
MODEL NUMBER
SERIAL NUMBER!
ENGINE NUMBER
SERIAL NUMBER
Briggs & Stratton w/30” Pan Serial No. 006339 and up
Briggs & Stratton w/30” Pan Serial No. 001400 and up
Briggs & Stratton w/28" Pan Serial No. 000600 and up
Briggs & Stratton w/32” Pan Serial No. 000101 and up
Briggs & Stratton w/28” Mower Serial No. 000101 and up
Briggs & Stratton w/30” Mower Serial No. 000101 and up
Briggs & Stratton w/32" Mower Serial No. 000101 and up
Briggs & Stratton w/28” Mower Serial No. 000101 and up
Briggs & Stratton w/28” Mower Serial No. 000101 and up
Briggs & Stratton w/32” Mower Serial No. 000101 and up
© Ariens Company - All Rights Reserved
Decals
|| lens
05216800 (050,303)
CAUTION
I Before sinning ongine hesure machine js in iicutrnl and mower clutch is
« disengaged
V"' few
Etigine
High Ignition
M ovjei' Mower
Clutch Height
02743000 Dash with Silkscreen
[\/lower Clutch
07855500
07855200 |
|
|
|
|
|
Mower |
|
|
|
|
Height |
|
ROTATING |
|
|
|
BLADE |
|
|
|
>Keep hands |
07855400 |
|
|
& feet away. |
|
|
|
>Stop engine & |
|
|
|
remove ignition |
|
|
|
key before |
|
|
|
clearing. |
|
|
07798700 - (Not 927301,302,303)
07712100 - (927301,302,303)
A CAUTION
Before starting engine be sure machine is in neutral and mower clutch is disengaged.
07855800
Cast Iron Bore
07797600 (Not 045,048,301)
f AWARNINGÌ
TO AVOID SERIOUS INJURY
OR DEATH
• RLiad opE?rator's manual. |
al |
"! |
• Undersiand localion and |
i |
|
funclion of all control^«. |
I |la||^ |
|
• Look down and tiehind |
|
|
and while backing, |
tiKoyifn |
|
■ Romoyc ohjccls fiatcou |
|
|
"by "the blade.............................................. |
|
|
•Avoid sttddon toms,
•Chock interlock system ix3i manual before uso.
•Keep all sheilds in place.
•Nevor carry chi Idem.
► Keep |5eople and pets away v;lien o|>= rating
machine.
»Go up and down tslopes, not across,
•ft machine stops going uphill, shut off PTO and back down slowly.
GO
•Release parking brake
•Depress clutch pedal
•Shill to 1st or 2nd speed
•Slowly lelcase clutch
» Shift to desired Sfjeed
STOP
» Depress clutch pedal * DOiJress Brake ixidal
* Befoie leaving operator's
position:
Shift to neutral Engage parking brake
Oi sen gage mower dutch
Stop Engjine Remove ignition key
SERVICING
► Wait for all movement to slop * Disconnect spark plug wire
•Before dpping unit, drain gas larik arid remove battery' i1 electric
07859800 - (Not 301,302,303)
07712000 - (927301,302,303)
07778600 - (927045,301)
07784700 - (927037)
07779400 - (927043)
07785100- (927050,303)
07710700- (927302)
07785000 - (927047)
07711700- (927048)
07711800- (927049)
07701700 (Not 037,043,049)
3
Electrical
Models 927037,043,045,047,048,049,050,301,302,303
12
ITEM |
PART |
DESCRIPTION |
QTY. |
ITEM |
PART |
DESCRIPTION QTY. |
|
NO. |
NO. |
|
|
NO. |
NO. |
|
|
|
|
|
|
|
|
|
|
1 |
01238500 |
Regulator |
1 |
9 |
02707800 |
Switch Interlock |
|
2 |
02727900 |
Starter Cable 16” |
1 |
|
|
(037,043,045,047) |
2 |
3 |
02749400 |
Battery |
1 |
|
02754100 |
Switch-Snap Mounting N.O. |
|
4 |
02518900 |
Ground Cable |
1 |
|
|
(048,049,050,301,302, |
|
5 |
02727200 |
Starter Cable 13” |
2 |
|
|
303) |
2 |
6 |
03057700 |
Solenoid |
1 |
10 |
02724000 |
Module |
1 |
7 |
02753600 |
Wire Harness RM |
|
11 |
02739700 |
Adapter - Seat Switch |
1 |
|
52707300 |
B & S Engines |
1 |
12 |
03171600 |
Switch Seat |
1 |
8 |
Switch Assembly |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes
Models 927037,043,045,047,048,049,050,301,302,303
Frame and Seat
Models 927037,043,045,047,048,049,050,301,302,303
ITEM |
PART |
DESCRIPTION QTY. |
ITEM |
PART |
DESCRIPTION QTY. |
|
NO. |
NO. |
|
NO. |
NO. |
|
|
|
|
|
|
|
|
|
1 |
02726400 |
Engine Cover (047,050,303) 1 |
32 |
06202600 |
Bolt-Round Head Square |
|
2 |
03584600 |
Seat-V450 |
|
|
Neck .312-18 x.62 |
1 |
|
|
(043,047,050,302,303) 1 |
33 |
02700400 |
Brace |
1 |
|
03504100 |
Seat V-350 |
34 |
06504000 |
Nut-Locking-Center .250-20 |
2 |
|
|
(037,045,048,049,301) 1 |
35 |
06101700 |
Screw-Machine 10-24x .62 |
2 |
3 |
02743500 |
Seat Bracket 1 |
36 |
05903900 |
Bolt-Hex .31-18 X.50 |
4 |
4 |
02735100 |
Baffle 1 |
37 |
07405200 |
Screw-Tapping .25-20 x .50 |
4 |
5 |
06505100 |
Nut-Keps 10-24 2 |
38 |
02538700 |
Strap (047) |
1 |
6 |
06101400 |
Screw-Machine 10-24 x .38 2 |
39 |
06907500 |
Clip (047) |
1 |
7 |
06702000 |
Pin-Hair Internal .08 x .18 |
40 |
01035800 |
Spacer Bushing |
2 |
|
|
X1.18 2 |
41 |
52700200 |
Frame with Decals |
1 |
8 |
02744900 |
Seat Hold Down 1 |
42 |
02460900 |
Key Set |
1 |
9 |
06504200 |
Nut-Locking .312-18 16 |
43 |
07517700 |
Cap-Ignition Switch |
1 |
10 |
06301800 |
Washer-Lock Internal .313 |
44 |
06517300 |
Nut-Panel .625-32 |
1 |
|
|
X .030 2 |
45 |
06301900 |
Washer-Lock Internal .625 |
|
11 |
02739100 |
Seat Leg Assembly 1 |
|
|
X.045 |
2 |
12 |
06400200 |
Washer-Flat-Steel .38 x .875 |
46 |
02736400 |
Seat Pivot Bracket |
1 |
|
|
X .083 4 |
47 |
07501900 |
Knob |
1 |
13 |
06300300 |
Washer-Lock .312 x .097 4 |
48 |
07406400 |
Screw-Tapping 10-12 x .50 |
6 |
14 |
05913500 |
Bolt-Hex .31-18 X.75 4 |
49 |
07402600 |
Screw-Tapping 10-24 x .375 |
2 |
15 |
05902200 |
Bolt-Hex .31-18 X.75 6 |
50 |
07507600 |
Plastic Grommet |
6 |
16 |
06407900 |
Washer-Flat-Steel .344 x |
51 |
06912700 |
Throttle Control |
1 |
|
|
1.125X.063 2 |
52 |
02743000 |
Dash Panel - RM |
1 |
17 |
02729700 |
Exhaust Pipe Assembly (047) 1 |
53 |
02530700 |
Rubber Pad |
1 |
18 |
07403400 |
Screw-Tapping 8-32 x .38 4 |
54 |
02742300 |
Battery Tray |
1 |
19 |
02755500 |
Muffler Guard (302) 1 |
55 |
02515200 |
Hook |
2 |
20 |
02755600 |
Screw (302) 3 |
56 |
02708000 |
Cowl |
1 |
21 |
07507500 |
Battery Strap 1 |
57 |
02739500 |
Grille Insert & Shell Assembly |
1 |
22 |
02701200 |
StandupTube (043,045,048, |
58 |
02718600 |
Left Hand Fender Brace |
1 |
|
|
049,301,302) 1 |
59 |
06405700 |
Washer-Flat-Steel .323 x |
4 |
|
02726700 |
StandupTube (047,050,303) 1 |
|
|
.625 x .062 |
|
23 |
05904500 |
Bolt-Hex .31-18x1.50 (043, |
60 |
06509000 |
Nut-Locking-Twin .312-18 |
2 |
|
|
045,048,049,301,302) 4 |
61 |
06201100 |
Bolt-Round Head Square |
2 |
|
05913000 |
Bolt-Hex .31-18x2.75 |
|
|
Neck .31-18X.75 |
|
|
|
(047,050,303) 4 |
62 |
02718700 |
Right Hand Fender Brace |
1 |
24 |
02722700 |
Service Bar Brace 2 |
63 |
02705200 |
Frame Brace |
1 |
25 |
01316600 |
Spacer (047,050,303) 4 |
64 |
06507800 |
Nut-Flange .312-18 |
4 |
26 |
02743900 |
Plate-Backing (047,050,303) 2 |
65 |
06203300 |
Bolt-Round Head Square |
|
27 |
07401400 |
Screw-Tapping .312-18 x .50 2 |
|
|
Neck .31-18X.62 |
4 |
28 |
02701100 |
Back Cover 1 |
66 |
07402900 |
Screw-Tapping .312-18 x |
|
29 |
05902800 |
Bolt-Hex .25-20 x .50 5 |
|
|
1.50 |
1 |
30 |
02726800 |
Clip (047,050,303) 2 |
67 |
02717700 |
Frame Brace |
1 |
31 |
07404500 |
Screw-Tapping 12-24 x .50 |
68 |
05900200 |
Bolt-Hex .31-18X.63 |
3 |
|
|
(047,050,303) 2 |
|
|
|
|
|
|
|
|
|
|
|