Loading...
Zoom®
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
Models
915131 – Zoom 34
915141 – Zoom 42
915143 – Zoom 50
ENGLISH
03989200A 12/09
FRANÇAIS
Printed in USA
TABLE OF CONTENTS
SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . 9 CONTROLS AND FEATURES . . . . . . . 11 OPERATION . . . . . . . . . . . . . . . . . . . . . 12 MAINTENANCE SCHEDULE . . . . . . . . 16 SERVICE AND ADJUSTMENTS . . . . . 18
STORAGE . . . . . . . . . . . . . . . . . . . . . . . 26 TROUBLESHOOTING . . . . . . . . . . . . . 27 SERVICE PARTS . . . . . . . . . . . . . . . . . 29 ACCESSORIES. . . . . . . . . . . . . . . . . . . 29 SPECIFICATIONS. . . . . . . . . . . . . . . . . 30 WARRANTY . . . . . . . . . . . . . . . . . . . . . 31
INTRODUCTION
NON-ENGLISH MANUALS
Manuals in languages other than English may be obtained from your Dealer. Visit your dealer or www.ariens.com for a list of languages available for your equipment.
Manuals printed in languages other than English are also available as a free download on our website:
http://www.ariens.com
MANUALES EN IDIOMAS DIFERENTES DEL INGLES
Puede obtener manuales en idiomas diferentes del inglés en su distribuidor. Visite a su distribuidor o vaya a www.ariens.com para obtener una lista de idiomas disponibles para su equipo.
También puede imprimir manuales en idiomas diferentes del inglés descargándolos gratuitamente de nuestra página Web:
http://www.ariens.com
MANUELS NON ANGLAIS
Des manuels dans différentes langues sont disponibles chez votre revendeur. Rendez-vous chez votre revendeur ou allez sur le site www.ariens.com pour
consulter la liste des langues
disponibles pour votre équipement.
Les manuels imprimés dans des langues différentes de l’anglais sont également disponibles en téléchargement gratuit sur notre site Web:
http://www.ariens.com
THE MANUAL
Before operation of unit, carefully and completely read your manuals. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.
All reference to left, right, front, or rear are given from operator seated in operation position and facing the direction of forward travel.
MODEL AND SERIAL NUMBERS
When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine.
Numbers are located on the product registration form in the unit literature package. They are printed on a serial number label, located on the frame of your unit under the seat (figure 1).
Unit Serial Number Label
Figure 1
GB - 2
•Record Unit Model and Serial numbers here.
•Record Engine Model and Serial numbers here.
PRODUCT REGISTRATION
The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit.
Customer Note: If the Dealer does not register your product, please fill out, sign and return the product registration card to Ariens or go to www.ariens.com on the internet
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of any part on this unit with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, and safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
NOTE: A complete Parts manual may be download from www.ariens.com on the internet.
DELIVERY
Customer Note: If you have purchased this product without complete assembly and instruction by your retailer, it is your responsibility to:
•Read and understand all assembly instructions in this manual. If you do not understand or have difficulty following the instructions, contact your nearest Ariens Dealer for assistance.
NOTE: To locate your nearest Ariens Dealer, go to www.ariens.com on the internet.
WARNING: Improper assembly or adjustments can cause serious injury.
Before Attempting to Operate Your Unit:
1.Make sure all assembly has been properly completed.
2.Understand all Safety Precautions provided in the manuals.
3.Review control functions and operation of the unit. Do not operate the unit unless all controls function as described in this manual.
4.Review recommended lubrication, maintenance and adjustments.
5.Review Limited Warranty Policy.
6.Fill out a product registration card and return the card to the Ariens Company or go to www.ariens.com.
DISCLAIMER
Ariens reserves the right to discontinue, change, and improve its products at any time without notice or obligation to the purchaser.
The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit.
GB - 3
SAFETY
WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the safety instructions in the manuals and on decals could result in serious injury or death.
Slopes are a major factor related to loss-of-control and tip-over accidents. Operation on all slopes requires extra caution.
Tragic accidents can occur if the operator is not alert to the presence of children. Never assume that children will remain where you last saw them.
Gasoline is extremely flammable and the vapors are explosive, handle with care.
Disengage attachment, stop unit and engine, remove key, engage parking brake, and allow moving parts to stop before leaving operator’s position.
SAFETY ALERTS
Look for these symbols to point out important safety precautions. They mean:
•Attention!
•Personal Safety Is Involved!
•Become Alert!
•Obey The Message!
The safety alert symbol is used in decals and with this manual. Understand the safety message. It contains important information about personal safety.
WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.
DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.
CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.
NOTATIONS
NOTE: General reference information for proper operation and maintenance practices.
IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety Decals. Refer to figure 2 for Safety Decal locations.
GB - 4
|
2 |
|
1 |
7 |
3 |
6 |
|
|
4 |
|
3 |
5 |
|
|
Figure 2 |
1.DANGER! |
3.DANGER! |
Avoid injury - Stay clear of rotating parts.
OL1816
2.CAUTION
No smoking.
Always keep feet and hands away from rotating parts.
OL1809
Always stand clear of discharge
area. Do not direct discharge
toward other people.
OL1810
Keep people away from unit while operating.
OL18111
Do not overfill.
Fill fuel tank to below bottom of filler neck.
•Never fill fuel tank when engine is running, hot or unit is indoors. Never overfill fuel tank.
•Replace fuel cap securely and clean up spilled fuel.
Shut off engine, remove key, and read manual before you adjust or repair unit.
OL1812
NO STEP! Always keep feet away from rotating parts.
OL1813
GB - 5
4.DANGER! TO AVOID SERIOUS INJURY OR DEATH
Read the operator’s manual.
OL1801
Keep children and others away from unit while operating.
OL1802
Never direct discharge toward other people. Thrown objects can cause injury.
OL1803
Look down and behind before and while backing.
OL1804
OL1805 Never carry children.
OL1806
Go up and down slopes, not across.
10 MAX DO NOT operate on slopes OL1807 over 10°.
•If machine stops going uphill, stop blade and back down slowly.
•Avoid sudden turns.
•Keep safety devices (guards, shields, switches, etc.) in place and working.
•Check interlock system per manual before use.
•Understand location and function of all controls.
•Never allow operation by untrained persons.
•Disengage PTO, stop unit and engine, set parking brake and remove key before making any inspections, repairs, etc.
5.WARNING!
Always stand clear of discharge area.
OL1814
Do not operate mower unless bagger is attached or guards are in operating position.
OL1815
6.DANGER!
Keep hands and feet away.
Do not operate mower unless guards are in operating position or bagger is attached.
7.HOT SURFACES!
DO NOT touch parts which are hot from operation. ALWAYS
allow parts to cool.
OL1801
EMISSION CONTROL SYSTEM CERTIFICATION LABEL
Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by EPA and/or CARB authorized service centers. Contact your Ariens Equipment Retailer concerning emission controls and component questions.
SAFETY RULES
If unit is to be used by someone other than original purchaser; loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation.
Only the user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property.
Read, understand, and follow all safety practices in Owner/Operator Manual before assembling, using or working on this mower.
GB - 6
ALWAYS remove key from ignition and wire from spark plug before assembly, or working on this unit.
Inspect unit before each use for: missing or damaged decals and shields, correctly operating safety interlock system, and deterioration of grass catchers. Replace or repair as needed.
ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when crossing or operating along streets or curbs.
Keep children, people, and pets away. Be alert and shut off unit if anyone enters work area. Keep children under watchful care of a responsible adult.
NEVER allow children to operate or play on or near unit.
Keep area of operation clear of all toys, and debris. Thrown objects can cause injury.
Stay alert for hidden hazards, holes, and ruts.
Avoid uneven or rough terrain. DO NOT operate near drop-offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
Dust, fog, etc. can reduce vision and cause an accident. Operate unit only when there is good visibility and light.
Data indicates that operators, age 60 and above, are involved in a larger percentage of riding mower related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.
Only trained adults may operate unit. Training includes being familiar with controls and actual operation.
NEVER operate unit after or during the use of medication, drugs or alcohol.
NEVER allow anyone to operate this unit when their alertness or coordination is impaired.
Wear adequate safety gear, sturdy shoes, and protective gloves.
DO NOT wear loose clothing or jewelry and tie back hair that may get caught in rotating parts.
Protect eyes, face and head from objects that may be thrown from unit. Wear appropriate hearing protection. Always wear safety goggles or safety glasses with side shields when operating mower.
Avoid sharp edges. Sharp edges can cut. Moving parts can cut off fingers or a hand.
ALWAYS keep hands and feet away from all rotating parts during operation. Rotating parts can cut off body parts.
ALWAYS keep hands away from all pinch points.
Start and operate unit only when seated in operator’s position. Steering control levers must be in neutral, PTO disengaged and parking brake set when starting engine.
ALWAYS keep body and hands away from pin holes or nozzles which eject hydraulic fluid under pressure.
DO NOT touch unit parts which might be hot from operation. Allow parts to cool before attempting to maintain, adjust or service.
NEVER place your hands or any part of your body or clothing inside or near any moving part while unit is running.
NEVER direct discharge towards persons or property. Thrown objects may ricochet back towards operator. ALWAYS stand clear of the discharge area.
ALWAYS disengage attachment, stop unit and engine, remove key, engage parking brake, and allow moving parts to stop before leaving operator’s position.
Use extreme caution on gravel surfaces.
Disengage PTO when attachment is not in use and when crossing gravel surfaces.
DO NOT operate unit if safety interlock system is damaged or disabled. Check safety interlock before each use.
ALWAYS remove key to prevent unauthorized use.
DO NOT operate at too fast a rate. Slow down before turning.
Stop engine before removing grass catcher or unclogging chute.
DO NOT mow on wet grass. Reduced traction could cause sliding.
DO NOT try to stabilize the machine by putting your foot on the ground.
Know the weight of loads. Limit loads to those you can safely control and the unit can safely handle.
ALWAYS keep protective structures, guards and panels in good repair, in place and securely fastened.
Do not operate without either entire grass catcher or the discharge guard in place.
DO NOT operate in reverse unless absolutely necessary. ALWAYS look down and behind before and while backing; especially for children.
GB - 7
Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability when using attachments.
NEVER carry passengers–especially children–even with blades off.
Use extra care when approaching blind corners or objects that may obscure vision of hidden obstacles and children.
If you cannot back up a slope or you feel uneasy on it, do not mow it.
Mow up and down slopes, not across them.
Use slow speed on any slope. Tires may lose traction on slopes even though the brakes are functioning properly.
Keep all movements on the slope slow and gradual. DO NOT make sudden changes in speed or direction.
Use extra care while operating machines with grass catcher or other attachments. They can affect stability of the machine.
Avoid starting, stopping, or turning on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.
DO NOT operate on slopes over 10°.
DO NOT park on slopes unless necessary. If unit is parked on a slope, ALWAYS chock or block wheels and set parking brake.
DO NOT disengage or bypass transmission and coast downhill.
Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.
Follow the manufacturer’s recommendations for weight limits for towed equipment and towing on slopes.
Maximum Tongue weight: 30 lbs. Maximum Trailer weight: 300 lbs.
Do not use hitch with bagger attached. Do not use on steep hills or slopes.
Do not park on hills when trailer is attached.
Do not use with any ground engaging equipment.
NEVER allow children or others in or on towed equipment.
On slopes, the weight of the towed equipment may cause loss of traction and loss of control.
Travel slowly and allow extra distance to stop.
Use extra care when loading or unloading unit onto trailer or truck.
Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment and shut off fuel when transporting unit.
Keep unit free of grass clippings, leaves, and other debris. Clean up oil or fuel spills.
This product is equipped with an internal combustion type engine. DO NOT use unit on or near any unimproved, forest-covered or brush covered land unless exhaust system is equipped with a spark arrester meeting applicable local, state or federal laws. A spark arrester, if it is used, must be maintained in effective working order by operator.
Fuel is highly flammable and its vapors are explosive. Handle with care. Use an approved fuel container.
NO smoking, NO sparks, NO flames. ALWAYS allow engine to cool before servicing.
NEVER fill fuel tank when engine is running or hot from operation.
NEVER fill or drain fuel tank indoors. NEVER overfill fuel tank.
Replace fuel cap securely and clean up spilled fuel.
NEVER fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.
When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.
Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lockopen device.
If fuel is spilled on clothing, change clothing immediately.
Avoid Electric Shock. Objects contacting both battery terminals at the same time may result in injury and unit damage. DO NOT reverse battery connections.
Explosive Gases from battery can cause death or serious injury. Poisonous battery fluid contains sulfuric acid and its contact with skin, eyes or clothing can cause severe chemical burns.
NO flames, NO sparks, NO smoking near battery.
ALWAYS wear safety glasses and protective gear near battery. Use insulated tools.
GB - 8
DO NOT TIP battery beyond a 45° angle in any direction.
ALWAYS keep batteries out of reach of children.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.
Reverse connections may result in sparks which can cause serious injury. Always connect positive (+) lead of charger to positive (+) terminal, and negative (-) lead to negative (-) terminal.
ALWAYS disconnect negative (-) cable FIRST and positive (+) cable SECOND. ALWAYS connect positive (+) cable FIRST, and negative (-) cable SECOND.
A frozen battery can explode and result in death or serious injury. DO NOT charge or jump start a battery containing frozen fluid.
Thaw the battery before putting on a charger or jump starting.
ALWAYS keep protective structures, guards, and panels in good repair, in place and securely fastened. NEVER modify or remove safety devices.
DO NOT change engine governor settings or over-speed engine.
Fumes from engine exhaust can cause injury or death. DO NOT run engine in an enclosed area. Always provide good ventilation.
ALWAYS maintain unit in safe operating condition. Damaged or worn out muffler can cause fire or explosion.
Stop and inspect equipment if you strike an object or if there is an unusual vibration. Repair, if necessary, before restarting. Never make adjustments or repairs with the engine running.
Mower blades are sharp and can cut you. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. NEVER weld or straighten mower blades.
Rotation of one blade may cause rotation of the other blades.
Check brake operation frequently. Adjust and service as required.
Keep all hardware properly tightened. Stored energy in springs can cause injury.
Maintain or replace safety and instruction labels, as necessary.
Never store the machine or fuel container inside a building where there is an open flame, such as a water heater.
Shut off fuel (if provided) and allow engine to cool completely before storing in closed area or covering unit.
Clean grass and debris from unit, especially from around muffler and engine, to help prevent fires.
For extended storage, clean unit thoroughly. See Engine Manual for proper storage.
Use only attachments or accessories designed for your unit.
Check attachment components frequently. If worn or damaged, replace with manufacturer’s recommended parts.
ASSEMBLY
WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.
Tools Required
•Adjustable wrench
•Petroleum jelly or dielectric grease.
Unpack Unit
Remove unit and all other components from the shipping container. Engage transmission bypass lever (see MOVING UNIT MANUALLY on page 15). Push unit from container onto a level surface. Disengage transmission bypass lever.
Connect Battery
See Battery Removal and Installation on page 22 and perform steps 2 and 3 in the installation section.
GB - 9
Place Unit in Operating Position (Figure 3):
NOTE: The seat is shipped with the seat positioned as far back as possible.
1. Tip seat forward and adjust the seat as needed (see TIPPING SEAT FORWARD on page 18 and SEAT ADJUSTMENT on page 18).
2. Remove eccentric spacers and rotate steering levers to the operating position. Reinstall spacers. Do not tighten.
3. Adjust steering levers (see ADJUSTING STEERING LEVERS on page 24).
1
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
1. |
Steering Lever |
3. Eccentric |
|||||
2. |
Seat |
Spacer |
|||||
Figure 3
Check Engine Oil Level
Refer to Engine Manual.
Check Tire Pressure
CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly:
•Do not attempt to mount a tire without the proper equipment and experience to perform the job.
•Do not inflate the tires above the recommended pressure.
•Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel.
•Do not stand in front or over the tire assembly when inflating. Use a clipon chuck and extension hose long enough to allow you to stand to one side.
See SPECIFICATIONS on page 30.
Level Mower Deck
See LEVELLING AND ADJUSTING PITCH OF MOWER DECK on page 20.
Fill Fuel Tank
See FILLING FUEL TANK on page 13.
Check Safety Interlock System
WARNING: Safety interlock failure and improper operation of unit can result in death or serious injury. Check system before each use to make sure it is functioning properly.
See Safety Interlock System on page 12.
Check function of all controls
See OPERATION on page 12.
GB - 10
CONTROLS AND FEATURES
6
4
7
5
11 
8
1 2 3
10
915131, 915141
9
13 |
12 |
2 |
3 |
|
|||
|
|
915143
|
|
Figure 4 |
|
|
|
|
|
1. |
Throttle/Choke Lever ( 915131, 141) |
7. |
Fuel Tank |
2. |
Ignition Switch |
8. |
Mower Lift Pedal |
3. |
PTO Switch |
9. |
Mower Deck |
4. |
Seat |
10. |
Discharge Chute |
5. |
Fuel Level |
11. |
Parking Brake’ |
6. |
Steering Levers |
12. |
Choke (915143) |
|
|
13. |
Throttle (915143) |
GB - 11
Loading...