ZyXEL Communications iHA User Manual

P-660H-D Series

ADSL2+ 4-port Gateway

Quick Start Guide

Version 3.40

10/2005

P-660H-D Series Quick Start Guide

Overview

The Prestige 660H-D (P-660H-D) ADSL 2+ 4-port gateway is the ideal device for small networks connecting to
the Internet via ADSL.

See your User’s Guide for background information on all features.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware connections, see the included CD.

1DSL: Connect the Prestige to a telephone jack using a telephone wire.

2 LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN port for initial configuration and/or

Internet access.

3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for power adaptors specifications by region).

After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel
LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS LED then turns steady on if
the testing is successful. The LAN LED turns on if the LAN port is properly connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these ways:

• Zero Configuration

2

P-660H-D Series Quick Start Guide

• Web Configurator Internet Access Wizard

Note: Zero configuration is only able to configure the device automatically for Internet access if you are

using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address
from your ISP.

If you’re not using these Internet access settings, then use the Web Configurator Internet
Access Wizard to manually configure the device.

You will need your Internet access information such as user name and password if given by your ISP.

INFORMATION From ISP ENCAPSULATION METHOD YOU ARE USING

None RFC1483 in bridge mode with a dynamic IP address or ENET

ENCAP with a dynamic IP address

An IP address only RFC1483 in routing mode with a static IP address

A user name and password (and an IP address) PPPoA or PPPoE encapsulation (with a static IP address)

An IP address, subnet mask and a gateway IP
address

ENET ENCAP with a static IP address

2.1 Zero Configuration

Launch your web browser and navigate to any web
site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet
connection. This may take about two minutes.

If you have a PPPoE or PPPoA connection, a
screen displays prompting you to enter your
Internet account information. Enter the username,
password and/or service name exactly as provided.
Click Log on to the Internet!.

3