ZyXEL Communications IES-2000, IES-5005, IES-2500, IES-3000, IES-5000M Specifications

Benefits

6.5U/4U IP DSLAM with
DC Power

ies-5000
ies-5005

P Access Solutio

n

ł



Non-blocking Gigabit Backplane

ł



IEEE 802.1p Priority Queuing,
Packet Classification and Queue
Scheduling (SP, WRR)

ł



VLAN Bridging, VLAN Trucking, and
VLAN Stacking

ł



IGMP v1, v2 Snooping and Proxy

ł



256 Multicast Groups

ł



Anti IP/MAC Address Spoofing

ł



Rule-based Packet Filtering

ł



Failover Network Termination

ł



Single/Dual End Loop Test

ł



ATM Forum TM 4.0

Service Aware

As a flagship product line of ZyXEL IPDSLAM, the IES-5000/5005 Series is equipped with non-blocking

gigabit backplane, failover-enabled Management Switch Cards (MSC), dual power modules and high-port

density DSL line cards. With embedded IP-centric QoS, security and multicasting firmware features, the IES-

5000/5005 is a chassis-based system that facilitates Telco/ISP delivering high degree of quality of

experience to today’s demanding residential and business customers, and achieving its infrastructure

provisioning criteria of reliability, flexibility and scalability at competitive CAPEX/OPEX.

Scalability

ZyXEL’s IES-5000 is a 6.5RU height and 10-slot chassis-based system with separated 5RU splitter frame. Two

of the 10 slots are reserved for Management Switch Cards (MSC) and the remaining 8 slots are for DSL line

termination cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card

comes with 24 ports. In a standard rack, you can install up to 7 units without a splitter chassis or up to 4

units with a splitter chassis. The MSC has 4 GE ports for uplink and subtending. With the subtending

feature, the IES-5000 can be cascaded in the rack at a central office, or be connected to remote IES products

in the form of a tree, ring, or daisy-chained as needed. The uplinks can be used as a traffic aggregation

trunk or set to work in 1+1 redundant mode. Additionally, install two Management Switch cards (MSC) for

link redundancy and failover support. In case when an MSC fails, the second MSC takes over control within

1 second.

The compact design of IES-5005 offers a 4RU-height and 5-slot chassis-based system with a separated 3RU

splitter frame. One slot is reserved for an MSC card and the remaining 4 slots are for DSL line termination

cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card comes with 24

ports. In a standard rack, you can install up to 10 units without a splitter chassis or up to 6 units with a

splitter chassis. The IES-5005 supports remote terminal (RT) and uses the same MSC and line cards as the

IES-5000.

Multiple Standard DSL Services

Four hot swappable DSL line cards (ADSL2+ over POTS, ADSL2+ over ISDN, G.SHDSL, and VDSL2) are

available. The ADSL2+ over POTS and the ADSL2+ over ISDN give subscribers with asymmetric

transmission bandwidth of up to 25 Mbps/1.2 Mbps. The G.SHDSL.bis provides symmetric transmission

bandwidth of 4.096 Mbps, 8.192 Mbps or up to 16.384 Mbps (similar to a lease line). The VDSL2 offers up to

65 Mbps/35 Mbps high speed connectivity per port with various loop distances over copper wiring.

IES-5000

6.5U IP DSLAM with DC Power

IES-5005

4U IP DSLAM with DC Power

SpecificationsSpecifications

Advanced Triple Play Functionality

The IES-5000/5005 provides complete ATM QoS (UBR/VBR/CBR) and Ethernet L2 QoS on the line cards. The IP QoS (Packet classification/Rate

Limiting/Queue Scheduling) is provided on the Network Termination cards as well. Sophisticated PVC to VLAN bridging and aggregation enables end-to-

end QoS and various service allocation and provisioning. In addition, the IES-5000/5005 supports non-blocking traffic forwarding and multicast features

with up to 256 multicast groups and 384/192 members per group. The IES-5000/5005 can process more than 30 multicast IGMP join/leave requests per

second and the maximum channel processing time is less than 250ms. For security, the IES-5000/5005 provides anti MAC/IP address spoofing, broadcast

storm prevention, MAC count limiting, and policy-based packet filtering. All these features allow ISPs/Telco operators to provide High Speed Internet access,

VoIP, Near VOD, Broadcast TV and TV on demand, and other features easily.

Robust Physical Safety Design

ZyXEL’s IES-5000/5005 guarantees physical safety by embedding voltage, temperature and FAN speed sensors. When an abnormal condition is detected,

the LED displays and/or the corresponding alarms alert you to the situation. In cases when the system temperature goes higher than the configured

threshold, thermal cutoff protection kicks into action and the system will shut down automatically.

Sophisticated OAM&P Element Management System (EMS)

ZyXEL’s IES-5000/5005 provides various management methods: local console port, Web-based configuration, Telnet, and SNMP v1/v2/V3-based EMS

(NetAtlas Access EMS). Included management functions are Alarm and Status Surveillance, Configuration management, Performance management, and

Fault management. The IES-5000/5005 allows you to create multiple administrative accounts and 3 levels of access rights. Accounts with the first-level

privilege have full access rights. Second-level privilege accounts have the same access rights as first-level accounts except for account management. Third-

level accounts can only view configuration settings and performance statistics. NetAtlas Access EMS also provides view-based MIB management and XML-

based north bound interface. These features allow Telco operators to provide wholesale service to smaller CLECs and ISPs.

System Specifications

DSL Compliant

• ADSL:

- G.992.1 Annex A, G.992.3 Annex A, G.992.5

Annex A

- G.992.1 Annex B, G.992.3 Annex B, G.992.5

Annex B

Support G.992.3 and G.992.5 Spectral Mask

Support Annex M and Annex L in G.992.3

and G.992.5

Support EOC and Overhead Channel Access

Support the latency path function

Support loop diagnostic function specified

Support the power management capability

Support the capability of the Seamless Rate

Adaptation (SRA) on-line configuration

Dual end loop test

• SHDSL: G.991.2, G.991.2.bis

• VDSL2: G.993.2, G.994.1, G.997.1

ATM Traffic Management

• 8 VPC/VCC per DSL port

• Support UBR, CBR, rt-VBR, nrt-VBR QoS

Mechanisms

• Support ATM Forum TM 4.0 peak cell rate traffic

parameter

• Support downstream traffic shaping function

per ATM PVC

• Support ATM F5 OAM cells for End-to-End

Loop back test (ITU-T Rec. I.610)

Performance

• IEEE 802.1p CoS with priority queuing

• Eight queues with packet priority scheduling

(SPQ, WFQ, WRR)

• Support 256 multicast groups

• Support 384 copies for each multicast group

• The maximum channel zapping processing

time is 250 ms

• DSCP to 802.1p mapping

Security

• Port isolation

• IEEE 802.1x (Authentication)

• Rule-based packet filtering (L2 ~ L4 ACL)

• MAC count limiting

• ARP broadcast filtering

• DHCP broadcast filtering

• DHCP snooping

• NetBiOS filtering

• IGMP filtering

• Anti IP/MAC address spoofing

VLAN

• 4096 IEEE 802.1Q compliant VLAN tagging

• Port-based VLAN

• VLAN stacking

• VLAN Bridge Function (multiple PVCs to one

VLAN)(N:1)

• PVC and VLAN one to one mapping (1:1)

• VLAN Trunking (Single PVC join Multiple

VLAN)(1:N)

• Support GVRP function

Traffic Management

• Tunneling: PPPoE, MP encap. over ATM

(RFC 2684)

• STP: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s

• IEEE 802.3ad (Link Aggregation Control

Protocol)

• IP multicast forwarding

• IGMP v1, v2 snooping/proxy

• IGMP multicasting channel limiting

• DHCP Relay Option 82

• Multicast bandwidth control

• L2 ~ L4 ACL

• IGMP group count/filtering profile