ZTE ZXHNHS320V20 Users Manual



WirelessIPCameraZXHNHS320V2.0User’sGuide

1 Safety Instructions

 Using an authorized or incompatible power adapter may causefires, explosions or

other dangers.

 This product and its fittings include some small parts. Pleasekeep the product and

fittings out of children’s reach to preventchildren from damaging them, swallowing

small parts, or beingotherwise injured.

 This product is not a toy and should be used by children onlyunder the supervision of

an adult.

 Please use this product in the temperature range from -5°C to+40°C. Ambient

temperatures that are too high or too low maycause the product to malfunction.

 Please keep this product and its fittings from rain and moisture.

 Do not use this product in thunderstorms as they may causeproduct failures or

electric shocks.

 When using this product, keep it far away from householdappliances with a strong

magnetic or electric field such asmicrowave ovens and refrigerators.

2 Interfaces

Wlan Operation Frequency: 2412~2472MHz, EIRP Power (Max.): 15±3dbm.

Interface Function

MicroSD slot Insert a TF card into the slot to store local videos.

MicroUSB power

interface

Connect a power adapter or power bank to the interface.

Mode button Switch between function modes. For details, please refer to the

instructions given by the app.

Reset button Press and hold the button until the LED turns red to restore the factory

settings.

LED

Off The camera is not powered on.

Red

Solid: The camera is starting up.

Flashing: The camera is being upgraded to the latest version.

Blue

Slow flashing: The camera is awaiting network configuration.

Fast flashing: The camera is having its WLAN configured.

Blue/Green

Flashing alternately in blue and green: The camera is obtaining its IP

address.

Green

Flashing: The camera has obtained its IP address and is attempting to

connect to the server.

Solid: The camera has been connected to the server and is operating

normally.