ZTE ZXHNHS320 Users Manual

ZTE HS320 Wireless HD IP Camera

1 Interfaces

User’s Guide

Interface Function
MicroSD slot Insert a TF card into the slot to store local videos.
MicroUSBpower
interface
Mode button Switch between function modes. For details, please refer to the

Reset button Press and hold the butt on until the LED turns red to restore the factory

LED

Off The camera is not powered on.

Red Solid: The camera is starting up.

Connect a power adapter or power bank to the interface.

instructions given by the app.

settings.

Flashing: The camera is being upgraded to the latest version.

Blue

Blue/Green

Green

Slow flashing: The camera is awaiting network configuration.
Fast flashing: The camera is having its WLAN configured.
Flashing alternately in blue and green: The camera is obtaining its IP
address.
Flashing: The cam era has obtained its IP address and is attempting to
connect to the server.
Solid: The camera has been connected to the server and is operating
normally.

2 Safety Instructions

 Using an authorized or incompatible power adapter may cause fires, explosions or

other dangers.

 This product and its fittings include some small parts. Please keep the product and

fittings out of children’s reach to prevent children from damaging them, swallowing
small parts, or being otherw ise i njured.

 This product is not a t oy and shou ld b e us ed by ch ildr en only und er the super v ision o f

an adult.

 Please use this product in the temperature range from -5°C to +40°C. Ambient

temperatures that are too high or too low may cause the product to malfunction.

 Please keep this product and its fittings from rain and moist ur e.
 Do not use this product in thunderstorms as they may cause product failures or

electric shocks.

 When using this product, keep it far away from household appliances with a strong

magnetic or electric field such as microwave ovens and r efrigerators.

3 Preparing to Use the Camera

 Power on the camera. The LED turns on. For the ZTE IP camera to perform its

functions, it has to be connected to a wireless router whose routing feature is

enabled.

 Make sure that the camer a is w ithi n r ange of the wireless router.