ZTE ZXHNH267N Users Manual

ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: [phone]
URL: http://ensupport.zte.com.cn
E-mail: [e-mail]

ZXHN H168N

Home Gateway

User Manual

Version: V3.3

LEGAL INFORMATION

Copyright © 2017 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any
reproduction or distribution of this document or any portion of this document, in any form by any
means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the
contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service
marks, of ZTE CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations
or conditions are disclaimed, including without limitation any implied warranty of merchantability,
fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors
shall not be liable for damages resulting from the use of or reliance on the information contained
herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or
applications covering the subject matter of this document. Except as expressly provided in any
written license between ZTE CORPORATION and its licensee, the user of this document shall not
acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product
without further notice.
Users may visit the ZTE technical support website http://support.zte.com.cn to inquire for related
information.
Hereby, ZTE Corporation, declares that this Radio LAN device is in compliance with the essential
requirements and other relevant
The ultimate right to interpret this product resides in ZTE CORPORATION.

provisions of Directive 1999/5/EC .

Serial Number:
Publishing Date :

C h a p t e r 1

Safety Precautions

Usage Cautions

• Read all the safety cautions carefully before using the device.

• Only use the accessories included in the package, such as power supply adapter and battery.

• Do not extend the power cord, otherwise the device will not work.

• The power supply voltage must meet the requirements of the device input voltage (The voltage

fluctuation range is less than 10%).

• Keep the power plug clean and dry to prevent any risk of electric shock or other dangers.

• Disconnect all the cables during a lightning storm to prevent the device from damage.

• Power off and unplug the power plug when the device is not in use for a long time.

• Do not attempt to open the covers of the device. It is dangerous to do so when the device is powered

ON.

• Do not directly stare at the optical interface to prevent any eye injuries.

• Power off and stop using the device under the conditions such as, abnormal sound, smoke, and

strange smell. Contact the service provider for maintenance if the device is faulty.

Environment Requirements

• Ensure proper ventilation to the device. Place the device away from direct sunlight.

• Keep the device ventilated and dry. Never spill any liquid on the device.

• Do not place any object on the device to prevent any deformation or damage to the device.

• Do not place the device near any source of heat or water.

• Keep the device away from any household appliances with strong magnetic or electric fields, such as

microwave oven and refrigerator.

Cleaning Requirements

• Before cleaning, power off the device, and unplug all the cables connected to the device, such as

power cable, optical fiber, and Ethernet cable.

• Do not use any liquid or spray to clean the device. Use a soft dry cloth.

Environment Protection

• Do not dispose the device or battery improperly.

• Observe the local regulations about the equipment disposal or treatment.

Environmental Information

The equipment you purchased has required the extraction and use of natural resources for its
production. It may contain substances that are hazardous to people’s health and to the environment. To

avoid putting such substances into our environment and to reduce pressure on our natural resources, we
ask that you reuse or recycle your end-of-life equipment by using an accredited electronics take-back
system.

The symbols below indicate that this product should be reused or recycled and not simply discarded.
Please locate and use an appropriate reuse and recycling site.

If you need more information on collection, reuse and recycling systems, contact your local or regional
waste administration. You may also contact your equipment provider for more information on the
environmental performances of these products.

FCC - PART 68

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains, among other information, a product identifier
in the format US: ZTEDL01AHNH168N. If requested, this number must be provided to the telephone
company.
This equipment uses the following USOC jacks: RJ-11,RJ-45.
REN (RINGER EQUIVALENT NUMBERS) ：0.1A STATEMENT Notice: The Ringer Equivalence
Number (REN) assigned to each terminal device provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed 5.
ATTACHMENT LIMITATIONS STATEMENT
Notice: This equipment meets telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements
document(s). This is confirmed by marking the equipment with the Industry Canada certification
number. The Department does not guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give
the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas. Caution: Users should not attempt to
make such connections themselves, but should contact the appropriate electric inspection authority, or
electrician, as appropriate

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.