ZTE ZXHNF670E Users Manual
正面
F670E
F670E
F670E
F670E
F670E
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be colocated
or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
When this device operates in 5150-5250 MHz band, it should for indoor use only.
反面
ZXHN F670E
2017-06-07(R1.0)
F670E
ZXHN F670E
F670E
F670E
F670E
F670E
F670E
1.Dimension after folding(折叠后尺寸)：97*139mm.
2.Print colour(印刷颜色)：black printing(黑色印刷).
F670E
F670E
3.Material(材质)：70g writing paper (70g书纸).
4.Coating(表面处理)：无.
5.Binding process(装订工艺)：Paper folding(折页)——对折再包心折.
6.Output lpi(输出网线)：200 lpi.
7.Tolerance(公差)：L(长)*W(宽):±1mm.
8.Raw materials and the corresponding post processing should meet requirements defined
in the T&W Environmental Protection Technical Standards.
(原材料及后处理工艺均能满足我司《环保技术标准》要求).
效果图
用户手册
ZTE
ZXHN F670E(V1.0)外置天线
V01
N/A
1/1
柯琳春
罗 荣
61000000xxxx
17'06,07
Loading...