Figure 1-1 The ZXHN F660 ................................................................................................. 5
Figure 1-2 Application Scenario of the ZXHN F660 ............................................................. 6
Figure 3-1 The Rear Panel of the ZXHN F660 .................................................................... 8
Figure 3-3 LED Indicators of the ZXHN F660 .....................................................................10
TABLES
Table 3-1 Description of the ZXHN F660’s Interfaces ......................................................... 9
Table 3-2 Description of the ZXHN F660’s Buttons ............................................................. 9
Table 5-1 Specifications and Environmental Indices of the ZXHN F660 .............................22
Table 5-2 GPON Interface Indices of the ZXHN F660 ........................................................23
Table 5-3 Key Technical Indices of the ZXHN F660 ...........................................................24
Table 6-1 Standard Compliance of the ZXHN F660 ...........................................................24
Table 7-1 Glossaries of the ZXHN F660 ............................................................................26
4ZTE Confidential & Proprietary
Page 7
1 Overview
1.1 Product Positioning
The ZXHN F660, a GPON optical network terminal (ONT) for home users, is designed for
the fiber to the home (FTTH) scenarios, supports desktop mounting and wall mounting.
The ZXHN F660 complies with the ITU-T G.984 standard, provides 2.488 Gbps downlink
and 1.244 Gbps uplink at network side, and provides 4GE ports, two Phone ports, one
802.11b/g/n(2*2 @2.4GHz) Wi-Fi interface with two External antennas, one USB port at
user side. Home users can easily access voice services, video services and many other
kinds of high-speed broadband services by the ZXHN F660’s rich interfaces.
ZXHN F660 Product Description
Figure 1-1 The ZXHN F660
ZXHN F660 with External Antenna
ZTE Confidential & Proprietary5
Page 8
ZXHN F660 Product Description
1.2 Network Applications
As a GPON ONT designed for the FTTH scenarios, the ZXHN F660 provides four
10/100/1000M network interfaces, two Phone interfaces, one 802.11b/g/n(2*2 @2.4GHz)
Wi-Fi interface and one USB interface for home users. See Figure 1-2 for the application
scenario of the ZXHN F660:
Figure 1-2 Application Scenario of the ZXHN F660
2 Highlights
2.1 High Reliability
The full-service access capability featuring high bandwidth, high performance, high
reliability, and easy operation, administration and maintenance (OMCI/TR-069)
meets the continuously changing requirements of the customer, protects the legacy
investment, and enhances the value of the operator’s network.
The highly reliable heat dissipation design guarantees its stable operation.
The dual image ensures uninterrupted services during software downloading or
WPA2-Enterprise and both mixed-mode security authentication, and ensure safe
and reliable home Wi-Fi access
2.4 USB File Storage and Sharing Services
Sharing photos, music, video and other documents though the USB Interface, which
can connect to a USB storage device. Family members can free share by this
function.
USB Host interface, in line with the 2.0 specification
Supports the FAT, FAT32, NTFS partition format and most of the storage devices
on the market
ZTE Confidential & Proprietary7
Page 10
ZXHN F660 Product Description
2.5 Eco-Friendly Design
Automatically switches to energy-saving mode according to traffic status and
busy/idle status of the port.
Complies with CE, RoHS and WEEE standards.
2.6 Convenient Installation and Management
Flexible installation mode: on the desktop, on the wall, or in the information box
Remote batch upgrade, fault analysis, port loopback, link detection via the OMCI
Software upgrading and management via the EMS/OLT
Software upgrading and management via TR069
WEB management
Off-link & batch configuration
3 Hardware Features
3.1 Device Interfaces
The ZXHN F660's device interfaces as shown in Figure 3-1, include one optical interface
at network side, four 10/100/1000M Ethernet interfaces, two Phone interfaces, Wi-Fi and
one USB interface at user side, one Power interface
Figure 3-1 The Rear Panel of the ZXHN F660
8ZTE Confidential & Proprietary
Page 11
Device Interface
Description
PON(PON)
SC/APC interface for fiber connection.
Fully compliant to ITU-T G.984.x GPON standards
Phone
Supports two Phone interfaces with RJ-11 connector
LAN
Supports four 10/100/1000 Base-T Ethernet
interfaces with RJ-45 connector
Supports half /Full Duplex and flow control, auto
negotiation or manual configuration
Supports MDI/MDIX auto-sensing
Power
12V Power Input Interface
+12V DC (via external AC/DC adapter: 90–240V,
50/60Hz AC input, 12V DC output )
USB
Support USB host interface, 2.0 standard
Device Button
Description
Reset
When the device is powered on, press the button for 1
second to restart the device. The user setting
information is not lost.
When the device is powered on, press the button for
more than 5 seconds to restore the device to the
factory default settings.
ON/OFF
Power on/off
Press the button (ON), the device is turned on
Press the button again (OFF), the button pops, and
the device is turned off
ZXHN F660 with External Antenna
Table 3-1 Description of the ZXHN F660’s Interfaces
ZXHN F660 Product Description
3.2 Device Buttons
The ZXHN F660's device Buttons as shown in Figure 3-1 and Figure 3-2 includes one
reset button, one power button, one Wi-Fi button and one WPS button.
Table 3-2 Description of the ZXHN F660’s Buttons
ZTE Confidential & Proprietary9
Page 12
ZXHN F660 Product Description
Device Button
Description
Wi-Fi
Wi-Fi on/off
WPS
Start WPS processes
LED
Indicator
Definition
Color
LED Indicator
Power
Power supply
status
indicator
Green
OFF: The ZXHN F660 is powered off.
Constantly ON: The ZXHN F660 is
powered on.
PON
PON status
indicator
Green
OFF: The ZXHN F660 has not started
the registration process.
Constantly ON: The ZXHN F660 has
completed the registration process.
Flashing: The ZXHN F660 is
registering.
LOS
Optical signal
status
indicator
Red
OFF: The receiving optical power is
normal.
Constantly ON: The optical module of
the PON interface is powered off.
Flashing: The receiving optical power is
lower than the receive sensitivity of the
optical receiver.
3.3 LED Indicators
Figure 3-2 LED Indicators of the ZXHN F660
Table 3-3 Description of the ZXHN F660’s LED Indicators
10ZTE Confidential & Proprietary
Page 13
LED
Indicator
Definition
Color
LED Indicator
Internet
Internet status
indicator
Green
OFF: The ZXHN F660 is not powered
on or ethernet connection does not exi.
Constantly ON: The internet
connection has been established
(routing connection has the correct IP
address or bridge link is normal);
Flashing: The data is transmitted via
internet connection.
LAN1
LAN2
LAN3
LAN4
Ethernet
interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the Ethernet interface is not
connected to any terminal device.
Constantly ON: The Ethernet interface
is connected but no data is transmitted
via the Ethernet interface.
Flashing: The data is transmitted via
the Ethernet interface.
Phone1
Phone2
Phone status
indicator
Green
OFF: The ZXHN F660 is not powered
on or unable to register on the soft
switch/IMS.
Constantly on: The ZXHN F660 has
registered on the soft switch/IMS but no
service flow is being transmitted.
Flashing: Data is being transmitted.
Wi-Fi
Wi-Fi interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the WLAN interface is forbidden.
Constantly ON: The WLAN interface
has been started.
Flashing: There is data transmission
via the WLAN interface.
WPS
WPS status
indicator
Green or
multiple
colors
Yellow LED flashing: The ZXHN F660
is performing code matching.
Red LED flashing: The ZXHN F660
detects session overlapping.
Green LED constantly ON: Code
matching successful.
ZXHN F660 Product Description
ZTE Confidential & Proprietary11
Page 14
ZXHN F660 Product Description
LED
Indicator
Definition
Color
LED Indicator
USB
USB interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the USB interface is not
connected.
Constantly ON: The USB interface is
connected and works in Host mode, but
no data is transmitted via the USB
interface.
Flashing: There is data transmission
via the USB interface.
4 Functions
4.1 GPON Function
ITU-T G.984 compatible
Flexible mapping between GEM port and T-CONT
Priority level queuing and scheduling of the upstream traffic
AES-128 encryption
FEC
Five types of T-CONT
Upstream traffic classification based on VLAN ID and 802.1p
Multicast GEM port
SN, password, and SN+password authentication
Auto-restart and recovery in power supply failure
12ZTE Confidential & Proprietary
Page 15
4.1.1 Bandwidth Allocation
Static bandwidth allocation
Adopts static bandwidth allocation mechanism in compliance with ITU-T
G.983.1
Dynamic bandwidth allocation (DBA)
Adopts fair DBA policy for the same CoS services during traffic congestion
Dynamic bandwidth status report mode complies with ITU-T G.984.3
4.1.2 GEM Adaptation
ZXHN F660 Product Description
GEM mode
GEM frame mapping to GTC payload
Ethernet data frame mapping to GEM frame; Ethernet frame mapping into GEM
ports based on VLAN, CoS, or VLAN+CoS
4.1.3 T-CONT
Five types of T-CONT
T-CONT as the basic unit of the upstream service
T-CONT allocation based on the user and CoS; mapping to T-CONT queue based
on the CoS value or GEM port
T-CONT queue scheduling mode of WRR, SP, or WRR+SP
4.1.4 Operation and Maintenance
Physical layer operations and maintenance (PLOAM) defined in ITU-T G.984.3
OMCI defined in ITU-T G.984.4 \G.988 and OMCI extension
ZTE Confidential & Proprietary13
Page 16
ZXHN F660 Product Description
4.1.5 Optical Link Monitoring and Diagnosis
The optical module diagnostic monitoring interface monitors the parameters
including operating temperature of the optical module, supply voltage, bias current,
transmission power, receiving power, etc.
ONT long-time light emitting detection and auto shutdown.
Turn on or off the power supply of the optical transmitter under the control of the
OLT.
4.2 Wi-Fi Function
The Wi-Fi function provides an easy, convenient, flexible, and low-cost method for the
users to access the internet via the wireless LAN network. The Wi-Fi function complies
with IEEE802.11n (2x2) and offers a maximum PHY layer link rate of 300 Mb/s.
Frequency: 2.4 GHz
IEEE802.11b, IEEE802.11g, and IEEE802.11n compliant
Auto and manual channel selection
Auto and manual rate control
Transmission power control
Four SSIDs
Maximum 32 users
SSID broadcast enabling/disabling function
Access control based on MAC address
Shared key authentication and 128-bit WEP authentication
WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK and WPA2-Enterprise security
authentication
14ZTE Confidential & Proprietary
Page 17
WPS
WMM
Maximum TX power up to 100mW
Two External antennas
4.3 VoIP Function
SIP and H.248 compliant
Support in-band DTMF tone sending/receiving and out-band DTMF signaling
with RTP, as per RFC2833
ZXHN F660 Product Description
32ms echo cancellation
G.711 a/u law, G.729, and G.722 coding/encoding algorithm
Voice Activity Detectors (VAD) and Comfort Noise Generation (CNG)
T.30 fax: fax transparent transmission (uncontrolled, RTCP control, and SS control)
MAC address binding to a user port. Only controls the input side of the port.
Anti-MAC transferring (spoofing)
Forbids the MAC addresses learned from a user port to be transferred to other
user port before aging.
Forbids the MAC addresses learned from uplink port to be transferred to the
user port.
MAC filtering
Both the source and destination MAC addresses support the blacklist and the
whitelist function.
4.5.2 VLAN Function
IEEE 802.1q VLAN with the VLAN ID from 1 to 4094
VLAN tagging/untagging on the user port
VLAN overwrite function on the user port
1:1 mapping between the user port (physical port or logical port) and VLAN
VLAN-based data forwarding
VLAN-based packet filtering
16ZTE Confidential & Proprietary
Page 19
VLAN untagged mode, tagged mode and double tagged mode
VLAN tag
Adds S-Tag to the untagged or priority tagged frames from the user port as per
the needs.
Adds C-Tag and S-Tag to the untagged or priority tagged frames from the user
port as per the needs.
4.6 QoS Function
Service flow rate limit based on the user port, service flow, and GEM port
ZXHN F660 Product Description
Upstream service flow classification based on the physical port and source MAC
address, destination MAC address, VLAN ID, VLAN priority level (IEEE802.1D),
Ethernet type (such as IP, PPPoE, ARP/RARP), destination IP address, source IP
address, IP protocol type (TCP, UDP, ICMP, IGMP), IP DSCP, and TCP/UDP
Ethernet priority level tagging of the upstream services based on the DSCP value
Ingress rate limit
Egress shaping
4.7 Multicast Function
IGMP v1/v2 Snooping
Multicast group per LAN port is 256
Fast leave time, which is the time since user terminal sends an IGMP leave
message to the ONU equipment stops the multicast data packet, is less than 20ms.
Support MVLAN
ZTE Confidential & Proprietary17
Page 20
ZXHN F660 Product Description
4.8 L3 Function
Data forwarding and routing
Bridging, routing, or hybrid mode (bridging and routing)
IPSec, RTSP private network traversal function; provides separate switches for
each ALG function.
4.9 IPv6 Function
IPv6 protocol packets transparent transmission
IPv4/IPv6 Dual Stack (Only support Internet and IPTV application, but not support
VoIP and TR069 application.)
IGMP protocol packets transparent transmission
MLD v1 and MLD snooping
IPv6 DS-Lite
18ZTE Confidential & Proprietary
Page 21
IPv6 address management
SLAAC allocation mode on LAN side
DHCPv6 on LAN side
SLAAC on WAN side
DHCPv6 on WAN side
DHCPv6-PD on WAN side
PPPoE+DHCPv6 on WAN side
PPPoE+SLAAC on WAN side
ZXHN F660 Product Description
4.10 Management Function
OMCI management
TR-069 management
WEB management
Management via the OLT on the EMS
Built-in capability for remote management with standard compliance, including the
full range FCAPS functions like supervision, monitoring, and maintenance.
Port loopback detection
Performing MIB operation via the OMCI, including the create, delete, and get-next
commands
Remote software download, activation, and reboot via the OMCI
Dual image, version download, upgrading detection, and auto rollback
ZTE Confidential & Proprietary19
Page 22
ZXHN F660 Product Description
4.11 Security Function
Traffic filtering based on UNI, VLAN ID, 802.1p, UNI + 802.1p, VLAN + 802.1p
Multicast , unicast and broadcast flow attack protection
MAC address limiting based on each UNI or single ONT
Broadcast packet rate limit
Anti-DoS attack
MAC filtering
4.11.1 Data Security of the GPON Interface
Because the GPON system works in broadcast mode in the downstream direction, the
malicious users can easily intercept and attack other users’ messages. To enhance data
security of the user, the GPON downstream provides AES-128 encryption.
4.11.2 Traffic Suppression
Broadcast storm suppression
When the broadcast traffic including the unknown unicast and multicast traffic
exceeds the threshold that the user sets, the broadcast traffic will be discarded
till the traffic is lowered to a reasonable range, thereby avoiding network
congestion and ensuring normal operation of the network services.
4.12 Alarm Function
Dying gasp
Receiving optical power too high
Receiving optical power too low
20ZTE Confidential & Proprietary
Page 23
Transmission optical power too high
Transmission optical power too low
Port loopback alarm
Loss of signal
Loss of frame
Signal degradation alarm
Loss of GEM channel delineation
4.13 Performance Statistic Function
ZXHN F660 Product Description
4.13.1 Statistic of Ethernet Port Performance Parameter
Frames transmitted
Single collision frames
Multiple collision frames
Bytes transmitted
Unicast frames
Multicast frames
Broadcast frames
Pause frames transmitted
Collision frames transmitted (half duplex mode)
Frames received
Bytes received
ZTE Confidential & Proprietary21
Page 24
ZXHN F660 Product Description
Parameter
Nominal Value
Net dimensions
44mm(H)x220mm(W)x160mm (D)
Net weight
0.38kg
Typical Power consumption
<10 W
Noise
Null
Heat dissipation mode
Natural heat dissipation
Power supply
Rated 12 V DC (through the external AC/DC adapter)
Installation
Horizontal, Wall mounted
Operating environment
0℃–40℃
Relative humidity
5%–95%
Atmospheric pressure
70 kPa–106 kPa
Frame check sequence errors
Verification errors
Jumbo frames
Unicast frames received
Multicast frames received
Broadcast frames received
Runt frames received
Ethernet frames dropped (from UNI to NNI and vice versa)
5 Technical Indices and Parameters
5.1 Physical Structure, Environmental and Electrical
Indices
Table 5-1 Specifications and Environmental Indices of the ZXHN F660
22ZTE Confidential & Proprietary
Page 25
Parameter
Nominal Value
MTTR
30 mins
Parameter
Nominal Value
Connector type
SC/APC
Number of PON
1
Fiber type
Single-mode fiber
Wavelength
Transmitting end: 1310 nm (PON
interface)
Receiving end: 1490 nm (PON
interface)
Compliance standard of the PON
interface
ITU-T 984.x
Receiving rate of the optical interface
2.488 Gbps
Transmitting rate of the optical interface
1.244 Gbps
Transmission wavelength range
1290 nm–1330 nm
Root-mean-square spectral width of the
transmitting end
Less than 1 nm (-20 dB spectral
width)
Output optical power
Minimum 0.5 dBm, maximum 5 dBm
Optical power of the transmitter in output
OFF status
Less than -45 dBm
Extinction ratio
More than 10 dB
Receive range
1480 nm–1500 nm
Receive sensitivity
-28 dBm
Saturation optical power of the receiver
-8 dBm
Splitting ratio
1:64
Length of the optical link
20 km
5.2 Interface Indices and Parameters
Table 5-2 GPON Interface Indices of the ZXHN F660
ZXHN F660 Product Description
ZTE Confidential & Proprietary23
Page 26
ZXHN F660 Product Description
Parameter
Nominal Value
Capacity of the MAC address table
9K
Capacity of the multicast table
1K
IGMP join delay
< 10 ms (single channel)
IGMP leave delay
< 10 ms (single channel)
Startup time
90s (default)
T-CONT
8
GEM Port
32
Standard
Description
ITU-T G.984.1
General characteristics for Gigabit-capable Passive
Optical Networks (GPON)
Gigabit-capable Passive Optical Networks (G-PON):
ONT management and control interface specification
ITU-T G.984.5
Gigabit-capable Passive Optical Networks (G-PON):
Enhancement band
Broadband Forum
TR-101
Migration to Ethernet-Based DSL Aggregation, April
2006
Broadband Forum
TR-156
Using GPON Access in the context of TR-101,
December 2008
IEEE Std
802.1D-2004
Media Access Control (MAC) Bridges
5.3 Key Technical Indices
Table 5-3 Key Technical Indices of the ZXHN F660
6 Standard Compliance
Table 6-1 Standard Compliance of the ZXHN F660
24ZTE Confidential & Proprietary
Page 27
Standard
Description
IEEE Std
802.1Q-2005
Virtual Bridged Local Area Networks
IEEE Std
802.1ad-2005
IEEE Standards for Local and Metropolitan Area
Networks —Virtual Bridged Local Area
Networks—Revision—Amendment 4: Provider Bridges
IEEE 802.3-2005
IEEE Standard for Information
technology—Telecommunications and information
exchange between systems—Local and metropolitan
area networks—Specific requirements Part 3: Carrier
sense multiple access with collision detection
(CSMA/CD) access method and physical layer
specifications (Includes: IEEE Std 802.3ae-2002, IEEE
Std 802.3af-2003, IEEE Std 802.3ah-2004, IEEE Std
802.3aj-2003, IEEE Std 802.3ak-2004)(Revision of
IEEE 802.3-2002)
IEEE 802.1X-2004
IEEE Standards for Local and Metropolitan Area
Networks: Port-Based Network Access Control
ITU-T Y.1291
An architectural framework for support of Quality of
Service in packet networks
ITU-T H.248.1 V2
Gateway control protocol: Version 2
ITU-T H.248.1 v3
Gateway control protocol: Version 3
YD/T 1292-2003
Technical specification for media gateway control
protocol based on H.248
IETF RFC3261
SIP: Session Initiation Protocol
IETF RFC1112
Host extensions for IP multicasting
IETF RFC2236
Internet Group Management Protocol, Version 2
IETF RFC 3376
Internet Group Management Protocol, Version 3
SFF-8472
Specification for Diagnostic Monitoring Interface for
Optical Transceivers (Rev 10.3 Dec.1, 2007)
ITU_T K.21
Resistibility of Telecommunication Equipment Installed
in Customer Premises to Overvoltages and
Overcurrents
IEC/TS 61000-3-4
Limits - Limitation of Emission of Harmonic Currents in
Low-Voltage Power Supply Systems for Equipment with
Rated Current Greater Than 16 A First Edition
ZXHN F660 Product Description
ZTE Confidential & Proprietary25
Page 28
ZXHN F660 Product Description
Standard
Description
EN60950
Information technology equipment. Safety, General
requirements
UL60950
General Requirements for Information. Technology
Equipment
Acronym
Full Name
ACL
Access Control List
AES
Advanced Encryption Standard
Alloc-ID
Allocation Identifier
AN
Access Network
ARP
Address Resolution Protocol
ATM
Asynchronous Transfer Mode
CAC
Channel Access Control
CAPEX
Capital Expenditure
CATV
Community Antenna Television
CDR
Call Detail Record
CLI
Command Line Interface
COS
Class of Service
CVLAN
Customers VLAN
DBA
Dynamic Bandwidth Allocation
EMS
Element Management System
EPON
Ethernet Passive Optical Network
FE
Fast Ethernet
FEC
Forward Error Correction
FTP
File Transfer Protocol
FTTB
Fiber to the Building
FTTB/C
Fiber to the Building/Curb
7 Glossary
Table 7-1 Glossaries of the ZXHN F660
26ZTE Confidential & Proprietary
Page 29
Acronym
Full Name
FTTC
Fiber to the Curb
FTTCab
Fiber to the Cabinet
FTTH
Fiber to the Home
GE
Gigabits Ethernet
GFP
Generic Framing Procedure
GPON
Gigabit-capable Passive Optical Networks
IMS
IP Multimedia Sublayer
IP
Internet Protocol
IPTV
Internet Protocol Television
ITU
International Telecommunication Union
L2
Layer 2
L3
Layer 3
LACP
Link Aggregation Protocol
LAN
Local Area Network
MAC
Media Access Control
MDU
Multi-Dwelling Unit
MIB
Management Information Base
NGN
Next Generation Network
NE
Network Element
NMS
Network Management System
OAM
Operations, Administration and Maintenance
ODN
Optical Distribution Network
OLT
Optical Line Termination
ONT
Optical Network Terminal
ONU
Optical Network Unit
OPEX
operational expenditure
PON
Passive Optical Network
PHONE
Plain Old Telephone Service
PSTN
Public Switched Telephone Network
QoS
Quality of Service
RARP
Reverse Address Resolution Protocol
ZXHN F660 Product Description
ZTE Confidential & Proprietary27
Page 30
ZXHN F660 Product Description
Acronym
Full Name
RR
Round Robin
SCB
Single Copy Broadcast
SFP
Small Form-Factor Pluggable
SLA
Service Level Authentication
SN
Serial Number
SNMP
Simple Network Management Protocol
SP
Service Priority
SP
Strict Priority
SS
Soft Switch
STB
Set Top Box
STP
Spanning Tree Protocol
SVLAN
Service VLAN
TCP
Transmission Control Protocol
UDP
User Datagram Protocol
UNI
User Network Interface
VLAN
Virtual Local Area Network
VoD
Video on Demand
VoIP
Voice over Internet Protocol
WEEE
Waste Electrical and Electronic Equipment
WPS
Wi-Fi Protected Setup
WRR
Weight Round Robin
28ZTE Confidential & Proprietary
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.