Thank you for choosing this ZTE mobile device. In order to keep
your device in its best condition, please read this manual and
keep it for future reference.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print
errors or update specifications in this guide without prior notice.
This manual has been designed with the utmost care to ensure
the accuracy of its content. However, all statements, information
and recommendations contained therein do not constitute a
warranty of any kind, either expressed or implied. Please refer to
For Your Safety to be sure to use your phone properly and safely.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorized modifications of the software.
Images and screenshots used in this manual may differ from the
actual product. Content in this manual may differ from the actual
product or software.
2
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth® trademark and logos are owned by the Bluetooth
SIG, Inc. and any use of such trademarks by ZTE Corporation is
under license.
microSDHC Logo is a trademark of SD-3C, LLC.
Qualcomm® Snapdragon™ processors are products of
Qualcomm Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm
Incorporated, registered in the United States and other countries.
Used with permission.
Other trademarks and trade names are the property of their
respective owners.
Version No.: R1.0
Edition Time: September 6, 2016
3
Contents
Getting Started ....................................................... 10
Getting to Know Your Phone ............................................. 10
Knowing the Keys .............................................................. 12
Installing the nano-SIM Card and the Battery .................... 13
Installing the microSDHC Card (Not Included) .................. 15
Charging the Battery.......................................................... 16
Extending the Battery Life ................................................. 18
The positions of the Back key and the Recent apps key are
interchangeable through Settings > Navigation key.
Press and hold to turn on or off airplane
mode, restart, or power off.
Press to turn off or on the screen display.
Touch to return to the home screen from any
application or screen.
Touch and hold to use Google Search.
Touch to see recently used apps.
Press or hold either end of the key to turn the
volume up or down.
12
Installing the nano-SIM Card and the
Battery
Power off your phone before installing or removing the nano-SIM
card. And power off your phone before removing or replacing the
battery.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM
cards, or any non-standard nano-SIM card cut from a SIM card.
You can get a standard nano-SIM card from your service
provider.
1. Insert your fingernail into the slot at the bottom left of the back
cover and lift it up gently.
13
2. Hold the nano-SIM card with the cut corner oriented as shown
and slip them into the card holder. If the battery is installed,
remove it first.
3. Insert the battery by aligning the metal contacts on the battery
with the metal contacts in the battery compartment. Gently
push down on the battery until it clicks into place.
14
4. Align the back cover with the back of the phone and press the
cover back into place. Ensure that all the tabs are secure and
there are no gaps around the cover.
Installing the microSDHC Card (Not
Included)
A microSDHC card can be installed or removed while the phone is
turned on. Unmount the microSDHC card before removing it.
1. Remove the back cover.
2. Hold your microSDHC card with the metal contacts facing
down and slide it in.
15
NOTE:
Some applications may require a microSDHC card to work
normally or may store certain data on it. Therefore, it is
recommended that you keep a microSDHC card installed and
not remove or replace it randomly.
3. Replace the back cover.
Charging the Battery
Your phone’s battery should have enough power for the phone to
turn on, find a signal, and make a few calls. You should fully
charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables. The use of
unapproved accessories could damage your phone or cause the
battery to explode.
1. Connect the adaptor to the charging jack. Ensure that the
adaptor is inserted with the correct orientation. Do not force
the connector into the charging jack.
16
2. Connect the charger to a standard AC power outlet. If the
phone is on, you’ll see a charging icon, such as or ,
appear on the status bar.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on
the phone even when it is being charged. In this case, try again
after charging the phone for at least 20 minutes. Contact the
customer service if you still cannot power on the phone after
prolonged charging.
17
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi
usage and GPS functionality can drain your battery. You can
follow the helpful tips below to conserve your battery power:
Reduce the screen backlight time.
Lower the screen brightness.
Turn Wi-Fi, Bluetooth and auto-sync off when not in use.
Disable the GPS function when not in use. Most applications
using this function will periodically query the GPS satellites
for your current location, and each query drains your battery.
Powering On/Off
Press and hold the Power key to turn on your phone.
To power off, press and hold the Power key to open the
options menu and touch Power off.
Setting Up for the First Time
When you first power on your phone after you purchase it or
reset it to factory settings (see Backup and Reset), you need to
do some settings before using it.
Flick the language field to select the language. Then follow the
prompts to set up Wi-Fi, Google account, Google location and
other options.
18
Locking/Unlocking the Screen and
Keys
Your phone allows you to quickly lock the screen and keys (put
the phone to sleep mode) when not in use and to turn the screen
back on and unlock it when you need it.
To lock the screen and keys:
To quickly turn the screen off and lock the keys, press the Power
key.
NOTE:
To save battery power, the phone automatically turns off the
screen after some time of inactivity. You will still be able to
receive messages and calls while the phone screen is off.
To unlock the screen and keys:
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
- or Touch and hold to open the Camera app.
- or Touch a notification twice consecutively to open the related
app.
NOTE:
If you have set an unlock pattern, a PIN or a password for your
phone (see Protecting Your Phone With Screen Locks), you’ll
19
need to draw the pattern or enter the PIN/password to unlock your
screen.
Using the Touch Screen
Your phone’s touch screen enables you to control actions
through a variety of touch gestures.
Touch
When you want to type using the onscreen keyboard, select
items on the screen such as the application and settings
icons, or press the onscreen buttons, simply touch them with
your finger.
Touch and Hold
To open the available options for an item (for example, a
message or link in a web page), touch and hold the item.
20
Swipe or Slide
To swipe or slide means to quickly drag your finger vertically
or horizontally across the screen.
Drag
To drag, press and hold your finger with some pressure
before you start to move your finger. While dragging, do not
release your finger until you have reached the target position.
21
Pinch
In some apps (such as Maps, web browser, and Gallery), you
can zoom in and out by placing two fingers on the screen at
once and pinching them together (to zoom out) or spreading
them apart (to zoom in).
Rotate the screen
For most screens, you can automatically change the screen
orientation from portrait to landscape by turning the phone
sideways.
22
NOTE:
The auto-rotate feature needs to be enabled for the screen
orientation to automatically change. Touch the Home key >
> Settings > Display and check Auto-rotate screen.
You can also access the screen rotation control by sliding
down the status bar twice and touch Auto Rota te.
Getting to Know the Home Screen
The home screen is the starting point for your phone’s
applications, functions, and menus. You can customize your
home screen by adding shortcuts, folders, widgets, and more.
Status bar
Widget
Folder
Shortcut
Primary shortcuts
23
Extended Home Screen Panels
Your home screen is extendable, providing more space for
shortcuts, widgets, and more. Simply swipe left or right on the
home screen to see the extended panels. You can add or remove
home screen panels, or adjust their order.
To add a new home screen panel:
1. Touch the Home key > , or touch and hold an empty area
of the home screen and select WIDGETS.
2. Touch and hold an application icon or a widget and drag it to
the right edge of the screen to create a new home screen
panel and put the icon or widget on it.
NOTE:
No empty home screen panel is allowed to exist. If the icon,
widget or folder is the only item on the current home screen panel,
the panel will be deleted as you remove the item.
To adjust the order of a home screen panel:
1. Touch and hold an empty area of the home screen and slide
left or right to view the home screen thumbnails.
2. Touch and hold a thumbnail and drag it left or right to the
place you need.
NOTE:
Touch at the top of a home screen thumbnail to set it as the
main home screen.
24
Personalizing
Changing the System Language
1. Touch the Home key > > Settings > Language &
input > Language.
2. Select the language you need.
Setting the Date and Time
1. Touch the Home key > > Settings > Date & time.
2. Set the date, time, time zone, and date/time format.
To adjust the date and time automatically, check
Automatic date & time.
To adjust the date and time manually, uncheck
Automatic date & time and touch Set date / Set time to
change the date and time.
To adjust the time zone automatically, check Autom atic
time zone.
To adjust the time zone manually, uncheck Automatic
time zone and touch Select time zone to set the correct
time zone.
To adjust the format of time and date, touch Use 24-hour
format or Choose date format.
25
Changing Ringtone and Notification
Sound
You can customize the default incoming call ringtone and the
default notification sound.
1. Touch the Home key > > Settings > Sound & notifications.
2. Touch Phone ringtone or Default notification ringtone.
3. Select the ringtone you want to use and touch OK.
NOTE:
See Set a Ringtone for a Contact for how to assign a special
ringtone to an individual contact.
Turning On/Off System Sounds
1. Touch the Home key > > Settings > Sound &
notifications > Other sounds.
2. Touch Dial pad tones, Screen lock sounds, Touch sounds,
or Vibrate on touch.
Adjusting Volume
1. Touch the Home key > > Settings > Sound &
notifications.
2. Drag the sliders below Media volume, Alar m volume, Ring
volume, and Notification volume to adjust the volume for
each type of audio.
26
NOTE:
You can adjust the media volume when a media application is in
use by pressing the Volum e key. If no media application is active,
press the Vol ume key to adjust ringtone volume (or the earpiece
volume during a call).
Switching to Silent or Vibration Mode
You can set the phone to silent or vibration mode by using one of
the following methods.
Press the Volume key when no media application is active to
show the volume management window. Drag the slider to the
left or keep pressing the lower end of the Volume key to
switch the phone to vibration mode. Press the key again in
vibration mode to switch the phone to silent mode.
Swipe down from the top of the screen to open the notification
panel and drag the panel downwards. Touch Normal or Vibrate to switch the phone to vibration or silent mode.
Touch the Home key > > Settings > Sound &
notifications > Interruptions > When calls and
notifications arrive, and touch Don’t interrupt to switch the
phone to silent mode.
Touch the Home key > > Settings > Sound &
notifications > Notification mode and select Vibrate or
Mute to switch to vibration or silent mode.
27
NOTE:
In addition to vibration and silent modes, you can also allow
priority apps to send out notifications when you switch the phone
to priority interruption mode.
Applying New Wallpapers
You can set the wallpaper for the home screen and lock screen.
1. Touch and hold an empty place on the home screen, and
then touch WALLPAPERS.
2. Slide left or right on the wallpaper tab to select a wallpaper or
animation, or touch Pick image to choose the image you
want to use as the wallpaper. Some cropping may be needed
for Gallery and Photos images.
3. Touch Set wallpaper.
NOTE:
In addition, you can touch the Home key > > Settings >
Display > Wallpaper to pick an image from Gallery, Photos or
Wallpapers, or an animation from Live Wallpapers.
Changing Screen Brightness
1. Touch the Home key > > Settings > Display >
Brightness level.
2. Drag the slider to manually adjust the screen brightness.
28
NOTE:
Your phone can automatically adjust the screen brightness for
available light. Touch Adaptive brightness in the Display
settings screen to turn the feature on or off.
Adjusting the Home Screen Settings
You can customize the home screen by setting the Google
Search bar, screen scroll effect, app icon labels, etc.
1. Touch and hold an empty place on the home screen.
2. Touch to access more setting options.
3. In the HOME SCREEN SETTINGS section, you can set the
following options.
Search bar: Show or hide the Google Search bar on the
home screen.
Scroll effect: Select a scroll effect for the home screen.
Icon labels: Show or hide the icon labels on the home
screen.
Scroll wallpaper: Allow the wallpaper to scroll or not
when you swipe left or right on the home screen.
Grid size: Change the grid size of the home screen.
NOTE:
In the APP SETTINGS section, you can adjust the size of the
icon and the label text for the home screen and the app drawer.
29
Adjusting the App Drawer Settings
You can customize the app drawer by setting the layout, screen
scroll effect, app sorting mode, app icon labels, etc. To open the
app drawer, touch from the home screen.
1. Touch and hold an empty place on the home screen.
2. Touch to access more setting options.
3. In the DRAWER SETTINGS section, you can set the
following options.
Layout: Set the layout of the app drawer.
Scroll effect: Select a scroll effect for the app drawer
when the layout is set to PAGED.
Sorting mode: Set the app sorting mode when the layout
is set to PAGED.
Icon labels: Show or hide the icon labels in the app
drawer.
Blur background: Blur the background of the app drawer
or not.
NOTE:
In the APP SETTINGS section, you can adjust the size of the
icon and the label text for the home screen and the app drawer.
30
Protecting Your Phone With Screen
Locks
You can protect your phone by creating a screen lock. When it is
enabled, you need to swipe up on the screen, draw a pattern or
enter a numeric PIN or password to unlock the phone’s screen
and keys.
1. Touch the Home key > > Settings > Security > Screen lock.
2. Touch None, Swipe, Pattern, PIN or Password.
Touch None to disable the screen lock.
Touch Swipe to enable screen lock and allow unlocking
with a ‘slide' gesture. You can unlock the screen by
touching the display and sliding up.
Touch Pattern to draw and redraw a pattern that you
must draw to unlock the screen.
Touch PIN or Password to set a numeric PIN or a
password that you must enter to unlock the screen.
3. For Pattern, PIN, or Password lock, select how you want
notifications and their contents to show when the phone is
locked. Then touch DONE.
NOTE:
Remember the pattern, PIN or password you set. Otherwise, you
will have to contact the customer service and upgrade the phone
software to use the phone.
31
Protecting Your Phone With Encryption
You can encrypt all the data on your phone: your accounts,
application data, music and other media, downloaded information,
and so on. If you do, you must enter a numeric PIN or a
password each time you power on your phone.
WARNING!
Encryption is irreversible. The only way to revert to an
unencrypted phone is to perform a factory data reset, which
erases all your data.
Encryption provides additional protection in case your phone is
stolen, and may be required or recommended in some
organizations. Consult your system administrator before turning it
on. In many cases the PIN or password you set for encryption is
controlled by the system administrator.
Before turning on encryption, prepare as follows:
● Set a lock screen PIN or password.
● Charge the battery and make sure the battery level is 80% or
above.
● Keep the phone connected to the charger.
● Schedule an hour or more for the encryption process: you
must not interrupt it or you will lose some or all of your data.
When you're ready to turn on encryption:
1. Touch the Home key > > Settings > Security > Encrypt phone.
2. Read the information about encryption carefully.
32
The ENCRYPT PHONE button is dimmed if your battery is
not charged or your phone's not plugged in.
If you change your mind about encrypting your phone, touch
the Back key.
WARNING !
If you interrupt the encryption process, you will lose data.
3. Touch ENCRYPT PHONE.
4. Enter your lock screen PIN or password and touch NEXT.
5. Touch ENCRYPT PHONE again.
The encryption process starts. Encryption can take an hour or
more, during which time your phone may restart several times.
When encryption is completed, you're prompted to enter your
PIN or password.
Subsequently you must enter your PIN or password each time
you power on your phone in order to decrypt it.
Protecting Your Phone With Screen
Pinning
You can use the screen pinning feature to keep an app in view,
so others cannot switch to other apps or access your personal
information.
Turn On Screen Pinning
1. Touch the Home key > > Settings > Security > Screen
pinning.
33
2. Touch the On/Off switch.
3. If you want to ask for the unlock pattern, PIN or password
before unpinning the screen, switch on Ask for unlock pattern / PIN / password before unpinning when the
screen lock has been set.
Pin a Screen
1. Ensure that screen pinning is turned on.
2. Open the app you want to keep in view.
3. Touch the Recent apps key.
4. If there are many app tabs, swipe up to find on the
front-most tab.
5. Touch .
Unpin the Screen
To unpin the screen and return to normal use, touch and hold the
Recent apps key.
If you have asked for the unlock pattern, PIN or password before
unpinning the screen, swipe up on the lock screen and draw the
pattern or enter the PIN/password.
34
Knowing the Basics
Monitoring the Phone Status
The status bar at the top of the home screen provides phone and
service status icons on the right side. Below are some of the
icons you may see.
3G connected
Silent mode
Vibration mode
Priority mode Airplane mode
Battery low Bluetooth® on
Battery partially drained
Battery full Wi-Fi in use
Battery charging
/
Alarm set Phone microphone off
GPS on
35
No signal
Signal strength
Mobile data in use
Connected to a Wi-Fi®
network
Speaker on
Managing Notifications
Notification Icons
The status bar at the top of the home screen provides notification
icons on the left. Below are some of the icons you may see.
New SMS Upcoming event
New Wi-Fi network
detected
Downloading data
Sending data
USB connected
USB tethering on
Portable mobile hotspot
on
Wired headset
connected
New MMS
New message(s) from
the Email app
New message(s) from
/
the Gmail™ app
Missed call
Call in progress
Call on hold
Song playing
/
36
Open/Close the Notification Panel
Notifications report the arrival of new messages, calendar
events, and alarms, as well as ongoing events, such as when
you are playing music. You can open the notification panel to
view the details of notifications.
To open the notification panel, swipe your finger down on the
home screen or from the top of the screen.
To close the notification panel, swipe your finger up on the
screen or touch the Back key.
Respond to or Remove a Notification
In the notification panel, you can respond to a notification or
remove the notifications. The notification panel also supports
expandable notifications that let you perform additional actions
right from the notification itself.
To respond to a notification, just touch it.
Slide down with one finger to expand certain notifications.
You can also swipe two fingers vertically or pinch-zoom to
expand or collapse certain notifications.
To remove a notification, swipe it left or right.
To remove all notifications, touch below all the
notifications.
37
To manage notifications you have received, touch and hold a
notification to identify the application that created it. You can
then touch and enable Block to hide future notifications
from this app, or enable Priority to show them in priority
mode.
NOTE:
If you block notifications for an app, you may miss its important
alerts and updates. The notifications of some apps cannot be
blocked.
Use Quick Settings
The Quick Settings make it convenient to view or change the
most common settings for your phone.
Open the notification panel and drag the panel downwards to find
the following Quick Settings on the screen.
Hotspot: Touch to turn on or off the mobile hotspot feature.
Touch and hold to open the Mobile hotspot menu in Settings.
See Share Your Mobile Data Connection as a Mobile
Hotspot.
Normal / Vibrate / Mute: Touch to switch between sound,
vibration, and mute.
Location: Touch to turn on or off location services. Touch and
hold to open the Location menu in Settings. See Location.
Airplane: Touch to turn on or off airplane mode.
Auto Rotate: Touch to turn on or off the auto-rotate screen
feature.
Flashlight: Touch to turn on or off the flash.
38
Wi-Fi: Touch to turn on or off Wi-Fi. Touch and hold to open
the Wi-Fi menu in Settings. See Connecting to Wi-Fi.
Bluetooth: Touch to turn on or off Bluetooth. Touch and hold
to open the Bluetooth menu in Settings. See Connecting to
Bluetooth Devices.
Data: Touch to enable or disable data access over the mobile
network. Touch and hold to open the Data usage menu in
Settings. See Data Usage.
Brightness: Uncheck Auto and drag the brightness slider to
adjust the screen brightness manually.
NOTE:
In the Quick Settings screen, touch at the top to get to the
Settings menu; touch the battery icon to open the battery
settings screen; touch EDIT at the bottom to change control
switch position.
Managing Shortcuts and Widgets
Add Shortcuts and Widgets
1. Touch the Home key > .
- or -
To add widgets, touch and hold an empty area of the home
screen and select WIDGETS.
2. Slide left or right to browse the available applications or
widgets.
39
3. Touch and hold a widget or an application icon and drag it to
a home screen panel.
NOTE:
While holding the item, you can drag it to the right edge of the
screen to create a new home screen panel and put the item on it.
Move Shortcuts or Widgets
1. Touch and hold a shortcut or widget on the home screen.
2. Drag it to the place you need.
Remove Shortcuts or Widgets
1. Touch and hold a shortcut or widget on the home screen.
2. Drag it to (Remove) to remove it.
Adjust Widget Size
1. Touch and hold a widget on the home screen and then
release it.
2. An outline appears around the widget. Drag the outline to
resize the widget.
NOTE:
Not all widgets can be resized.
Organizing With Folders
You can create folders on the home screen and add several
shortcuts to a folder.
40
You can move or remove folders the same way as moving or
removing shortcuts.
1. Touch and hold a shortcut on the home screen and drag it
quickly over another shortcut.
2. Release the shortcut. A new folder will be created and both
shortcuts are added into the folder.
3. To add more shortcuts into the folder, touch and hold each
shortcut and drag it over the folder before releasing it.
NOTE:
Touch the folder and then touch the name field to rename the
folder.
Rearranging the Primary Shortcuts
The home screen includes a customizable primary shortcuts area
at the bottom visible from all home screens. You can keep at
most four items in the primary shortcuts area. Drag shortcuts or
folders in or out of the area to rearrange it.
41
Entering Text
You can enter text using the onscreen keyboard. Some apps
open it automatically. In others, you open it by touching where
you want to type. Touch the Back key to hide the onscreen
keyboard. You can also enter text by speaking with the Google
voice typing feature.
Enable or Disable Input Methods
1. Touch the Home key > > Settings > Language &
input > Current Keyboard.
2. Touch CHOOSE KEYBOARDS at the bottom.
3. Slide the switches beside the input methods to enable or
disable them.
NOTE:
Some default input methods may not be disabled.
Change Input Methods
1. When you use the onscreen keyboard to enter text, the icon
appears on the status bar.
2. Open the notification panel and touch Change keyboard.
3. Select the input method you need.
NOTE:
The icon appears only when more than one input method is
installed and enabled.
42
Google Keyboard
The Google Keyboard provides a layout similar to a desktop
computer keyboard. When screen auto-rotation is enabled, turn
the phone sideways and the keyboard will change from portrait to
landscape. The landscape keyboard is not supported in all
applications.
Touch the alphabetic keys to enter letters. Touch and hold
some specific keys to enter associated accented letters or
numbers. For example, to enter È, touch and hold and
the available accented letters and number 3 appear. Then
slide to choose È.
As you enter a word, candidates appear above the keyboard.
Touch to select the correct one; touch and hold to see more
possible options.
43
Touch to use uppercase. Double-tap to lock
uppercase. This key also changes to indicate the current
case you are using: for lowercase, for uppercase,
and when locked in uppercase.
Touch to delete the text before the cursor.
Touch to select numbers and symbols. You can then
touch to find more.
Touch to enter miniature icons, such as expressions,
horoscopes, and animals.
Touch to use Google voice typing.
Touch and hold to change the input language or set up
the Google Keyboard.
Gesture Typing
The Google Keyboard supports the gesture typing feature. You
use this feature to input a word by sliding through the letters.
To enable and use gesture typing:
1. Touch and hold on the Google Keyboard and then touch
Google Keyboard Settings.
2. Touch Gesture Typing and then touch Enable gesture
typing if this feature is turned off.
3. Move your finger from letter to letter on the keyboard to trace
a word without lifting the finger until you reach the end of the
word.
44
End of
the word
Start of
the word
NOTES:
Touch when you want to. If you want to enter a single letter,
go ahead and touch.
Lift your finger at the end of the word. A space is added
automatically when you begin to input the next word.
TouchPal Keyboard
The TouchPal keyboard offers three layouts including FULL,
PHONEPAD, and T+. You can touch to select a language
and layout.
You can also use Curve® and Wave™ to speed up text input by
moving your finger from letter to letter or word from word without
lifting the finger.
45
The Full Layout
The full layout offers an input experience similar to a computer
keyboard.
The alphabetic keys: Touch the keys to enter letters. Touch
and hold a key and slide if necessary to choose more
characters.
The shift key: Touch to use uppercase. Double-tap
to lock uppercase. This key also changes to indicate the
current case you are using: for lowercase, for
uppercase, and when locked in uppercase.
Word prediction: Touch and hold or and touch the
prediction switch to turn off or on prediction.
46
Pre-defined texts: Touch to enter digits, symbols, and
other texts. You can touch the arrow keys to turn pages, or
touch to go back to the alphabetic keys. Slide up on the
space key or touch to enter Emoji and emoticons.
The delete key: Touch to delete text before the cursor.
You can also slide left on the key to delete a whole word.
More options: Touch to access additional functions of
TouchPal, use voice input, edit text, change keyboard themes,
and more.
The PHONEPAD Layout
This layout is similar to a phonepad.
Touch an alphabetic key repeatedly until the desired letter
appears. You can also touch and hold the key and slide left or
right to choose the letter or number you need.
If word prediction is enabled ( ), just touch the keys once and
choose the right word.
47
The T+ Layout
Touch to enter the left letter on the key. Double-tap or flick right to
enter the right letter/symbol on the key. You can also touch and
hold a key and slide left or right to choose more letters and
symbols.
If word prediction is enabled ( ), just touch the keys once and
choose the right word.
Curve - Word Gesture
Curve allows you to enter text by moving your finger on the
screen from letter to letter to enter each word.
To enable and use Curve:
1. On the TouchPal keyboard, touch > Settings > Smart input and check Curve® - Word gesture.
2. Touch the Back key to return to the text field. Open the
TouchPal keyboard and switch to the FULL layout.
48
f
NOTE:
Curve is only available in the FULL layout.
3. Move your finger from letter to letter on the keyboard to trace
a word without lifting until you reach the end of the word.
End of
the word
Start o
the word
NOTES:
Touch when you want to. If you want to enter a single letter, go
ahead and touch the key.
Lift your finger at the end of the word. A space is added
automatically when you begin to trace the next word.
Wave - Sentence Gesture
Wave allows you to enter words by dragging candidate words to
the space key.
49
To enable and use Wave:
1. On the TouchPal keyboard, touch > Settings > Smart input and check Wave™ - Sentence gesture.
2. Touch the Back key to return to the text field. Open the
TouchPal keyboard and switch to the FULL layout.
NOTE:
Wave is only available in the FULL layout.
3. Touch or use Curve to enter the first word. As the first word
appears on the text field, candidate words appear on the
keyboard for you to choose from as the following word.
4. Drag the correct candidate word to the space key to add the
word to the text field.
NOTE:
If no candidate word is correct or displayed, you can go on
entering the words normally.
50
Google Voice Typing
Google Voice typing uses the Google voice recognition service to
convert speech to text.
1. Touch to access the voice typing feature when you are
using the Google Keyboard.
Or flick down the status bar when entering text and touch
Change keyboard, and then select Google voice typing.
2. When you see the microphone image, speak what you want
to type.
3. You can continue entering text to keep it or to delete it.
NOTE:
Say "comma," "period," "question mark," "exclamation mark," or
"exclamation point" to enter punctuation.
Input Method Settings
Choose the input method settings by touching > Settings >
Language & input from the home screen.
In the Keyboard & input methods section, you can set the
current input method and choose the settings for input methods.
Editing Text
Move the insertion point: Touch where you want to type.
The cursor blinks in the new position, and a tab appears
below it. Drag the tab to move the cursor.
51
Selecttext: Touch and hold or double-tap within the text.
The nearest word highlights, with a tab at each end of the
selection. Drag the tabs to change the selection.
Cut or copy: Select the text you want to manipulate. Then
touch the Cut or Copy button to cut or copy the text to
the clipboard.
Replace text with the clipboard text: Select the text you
want to replace. Then touch or PASTE.
Opening and Switching Apps
Open an App
1. Touch the Home key > .
2. Slide left or right on the screen and touch an app to open it.
Switch Between Recently Opened Apps
1. Touch the Recent apps key. The apps you’ve used recently
are displayed in a series of tabs. Slide up and down to see all
the tabs.
52
2. Touch a tab to open that app.
NOTE:
You can swipe a tab sideways or touch X on the tab to remove it
from the screen. Touch Clear all to remove all tabs.
Uninstalling an App
1. Touch the Home key > to open the application list
screen.
2. Touch and hold an application icon and drag the icon to
(Uninstall) at the top of the screen.
3. Touch OK to uninstall the app.
NOTE:
Pre-installed apps cannot be uninstalled.
53
Connecting to Networks and
Devices
Connecting to Mobile Networks
Control Mobile Data Use
To enable or disable data access:
1. Touch the Home key > > Settings > Mobile networks.
2. Touch the Mobile Data switch to enable or disable mobile
data use.
To get data services when roaming:
1. Touch the Home key > > Settings > Mobile networks.
2. Touch the Data roaming switch if it is turned off.
NOTE:
Data roaming may incur significant roaming charges.
Select Preferred Network Type
1. Touch the Home key > > Settings > Mobile networks >
Preferred network type.
2. Touch the type of network you prefer to connect to.
54
Set Access Point Names
To connect to the Internet you can use the default Access Point
Names (APN). And if you want to add a new APN, please contact
the service provider to get the necessary information.
1. Touch the Home key > > Settings > Mobile networks > Access Point Names.
2. Touch > New APN.
3. Touch each item to enter the information you get from your
service provider.
4. Touch > Save to complete.
NOTE:
To set the APN to default settings, touch > Reset to default.
Select Network Operator
1. Touch the Home key > > Settings > Mobile networks >
Network operators.
2. Touch Search networks to search for all available networks.
3. Touch a network in the network list to register manually.
You can also touch Choose automatically to select
preferred network automatically.
55
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide
Internet access at distances of up to 100 meters, depending on
the Wi-Fi router and your surroundings.
Turn Wi-Fi On and Connect to a Wi-Fi
Network
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position to turn on Wi-Fi.
3. Touch a network name to connect to it.
4. If the network is secured, enter the password and touch
CONNECT.
NOTE:
Your phone automatically connects to previously used Wi-Fi
networks when they are in range.
Get Notified of Open Networks
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced.
4. Slide the Network notification switch.
When Wi-Fi is on, you receive notifications in the status bar when
your phone detects an open Wi-Fi network. Switch off this option
to turn off notifications.
56
Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast
its name (SSID), or to add a Wi-Fi network when you are out of
range.
To connect to a secured network, you first need to get the
security details from the network's administrator.
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Add network.
4. Enter the network SSID (name). If necessary, enter security
or other network configuration details.
5. Touch SAVE.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your phone
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Push Button.
4. Press the WPS button on the access point and the access
point will recognize your phone and add it to the network.
57
Method two: PIN number
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Pin Entry.
4. The WPS PIN number displays on the screen. Enter the PIN
number into the access point's setup page.
After entering the PIN number, your phone automatically finds
the access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.
Forget a Wi-Fi Network
You can make your phone forget about the details of a Wi-Fi
network that you added - for example, if you don’t want the phone
to connect to it automatically or if it is a network that you no
longer use.
1. Touch the Home key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch the Wi-Fi network name and then touch FORGET.
Adjust Advanced Wi-Fi Settings
1. Touch the Home key > > Settings > Wi-Fi.
2. Touch > Advanced to adjust the following settings.
58
Network notification: Get notifications in the status bar
when Wi-Fi is on and an open network is available.
Scanning always available: Allow Google location
services and other apps to scan for networks even when
Wi-Fi is turned off.
Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi
on in sleep mode.
Install certificates: Install certificates needed for
connecting to certain Wi-Fi networks.
Wi-Fi Direct: Use the Wi-Fi Direct feature. See Using
Wi-Fi Direct®.
WPS Push Button: Connect to a WPS network via the
push button method.
WPS Pin Entry: Connect to a WPS network via the
phone PIN method.
MAC address: Check the MAC address.
IP address: Check the phone’s IP address.
Using Wi-Fi Direct®
Wi-Fi Direct allows Wi-Fi devices to share files and data directly
by connecting to each other without the need for wireless access
points (hotspots).
59
Connect to Another Device via Wi-Fi Direct
1. Touch the Home key > > Settings > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the On position.
3. Touch > Advanced > Wi-Fi Direct. Your phone will search
for other devices enabled with Wi-Fi Direct connections.
4. Touch a device name below Peer devices to connect with it.
The other device will receive a connection prompt and need
to accept the request for connection. Both devices may need
to enter a common PIN.
5. Once connected the device is displayed as “Connected” in
the Peer devices list.
Send Data via Wi-Fi Direct
1. Open the appropriate application and select the file or item
you want to share.
2. Select the option for sharing via Wi-Fi Direct. The method
may vary by application and data type.
3. Touch a device the phone has connected with or wait for it to
search for new devices and touch one of them.
Connecting to Bluetooth Devices
Bluetooth is a short-range wireless communication technology.
Phones or other devices with Bluetooth capabilities can exchange
information wirelessly within a distance of about 10 meters (32.8
feet). The Bluetooth devices must be paired before the
communication is performed.
60
Turn Bluetooth On/Off
1. Touch the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On or Off position.
When Bluetooth is on, the icon appears in the status bar.
Change the Device Name
1. Touch the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if Bluetooth is
off.
3. Touch > Rename this device.
4. Edit the name and touch RENAME.
Pair With Another Bluetooth Device
1. Touch the Home key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if Bluetooth is
off.
Your phone automatically scans for and displays the IDs of
all available Bluetooth devices in range. You could touch
> Refresh if you want to scan again.
3. Touch the device you want to pair with.
4. Confirm that the Bluetooth passkeys are the same between
the two devices and touch PAIR. Alternately, enter a
Bluetooth passkey and touch PAIR.
Pairing is successfully completed when the other device
accepts the connection or the same passkey is entered.
61
NOTE:
The Bluetooth passkey may be fixed for certain devices, such as
headsets and hands-free car kits. You can try entering 0000 or
1234 (the most common passkeys), or refer to the documents for
that device.
Forget (Unpair With) a Bluetooth Device
You can make your phone forget its pairing connection with
another Bluetooth device. To connect to the device again, you
need to search it and enter or confirm a passkey again.
1. Touch the Home key > > Settings > Bluetooth and
ensure that Bluetooth is turned on.
2. In the list of paired devices, touch the icon beside the
Bluetooth device you want to forget.
3. Touch FORGET.
Send Data via Bluetooth
1. Open the appropriate application and select the file or item
you want to share.
2. Select the option for sharing via Bluetooth. The method may
vary by application and data type.
3. Touch a Bluetooth device the phone has paired with or wait
for it to search for new devices and touch one of them.
Receive Data via Bluetooth
1. Turn Bluetooth on before trying to receive data via Bluetooth.
2. Flick down the status bar and touch .
62
3. Touch ACCEPT to start receiving the data.
Received files are stored automatically in a dedicated folder
(Bluetooth, for instance) in the phone. You can access them with
the File Manager app.
Connecting to Your Computer via USB
You can connect your phone to a computer with a USB cable and
transfer music, pictures, and other files in both directions. Your
phone stores these files in its internal storage.
If you are using USB tethering, you must turn that off before you
can use USB to transfer files between your phone and computer.
Connect Your Phone to a Computer via USB
1. Connect your phone to the PC with a USB cable.
2. Open the notification panel and touch (Connected as...).
3. Choose one of the following options:
Charge only: Charge your phone via USB.
Install driver: Install the driver needed for some USB
connection modes (such as MTP). You only need to install
the driver on the same PC once.
NOTE:
You can also install the driver on PC by running the
executable file in the new CD-ROM drive.
Media device (MTP): Transfer files on Windows
Mac®.
63
®
or
NOTE:
For Windows XP, please install the drivers and Media
Player 11 (or later version) when you use Media device
(MTP) for the first time.
Camera (PTP): Transfer photos using camera software.
NOTE:
To make your phone connect to the computer automatically using
the selected connection type, check Don’t ask me again.
Disconnect Your Phone From the Computer
To disconnect the phone from the computer, simply unplug the
USB cable when you’re finished.
Remove the microSDHC Card From Your
Phone
If you need to remove the microSDHC card while the phone is on,
you must unmount it first.
1. Touch the Home key > > Settings > Storage.
2. Scroll down and touch Unmount SD card > OK.
3. When the Unmount SD card menu changes to Mount SD
card, you can now safely remove the microSDHC card from
the phone.
NOTE:
If you unmount the microSDHC card, some apps that you are
using will stop and may be unavailable until you remount the
microSDHC card.
64
Erase the microSDHC Card
1. Touch the Home key > > Settings > Storage.
2. Scroll down and touch Erase SD card > ERASE SD CARD > ERASE EVERYTHING.
CAUTION:
The formatting procedure erases all the data on the microSDHC
card, after which the files CANNOT be retrieved.
Sharing Your Mobile Data Connection
You can share your phone’s data capabilities through tethering or
by activating the mobile hotspot feature to create a Wi-Fi hotspot.
Share Your Mobile Data Connection via USB
You can access the Internet on your computer via the USB
tethering feature of your phone. The feature needs data
connection on a mobile network and may result in data charges.
NOTE:
You cannot transfer files between your phone and your computer
when the phone is USB tethered.
1. Connect your phone to your computer with a USB cable.
2. Touch the Home key > > Settings > More.
3. Switch on USB tethering. A new network connection will be
created on your computer.
65
NOTE:
To stop sharing your data connection, switch off USB tethering
or disconnect the USB cable.
Share Your Mobile Data Connection as a
Mobile Hotspot
You can share your phone’s data connection with other devices
by turning your phone into a mobile Wi-Fi hotspot. The feature
needs data connection on a mobile network and may result in
data charges.
NOTE:
When the mobile Wi-Fi hotspot feature is enabled, you cannot
use your phone’s Wi-Fi capability to access the Internet. You still
remain connected to the Internet via your mobile data network.
1. Touch the Home key > > Settings > Mobile hotspot.
2. Slide the Mobile hotspot switch to the On position.
After a moment, the phone starts broadcasting its Wi-Fi
network name (SSID).
3. On another device, locate your phone via Wi-Fi and connect
with it to start using the phone’s mobile data.
Or, if the device supports Wi-Fi Protected Setup, touch the
WPS icon on the device, and then touch > WPS on the
Mobile hotspot screen of your phone.
NOTE:
To stop sharing your data connection, slide the Mobile hotspot
switch to the Off position.
66
Set Your Mobile Hotspot
You can change the name of your phone's Wi-Fi network (SSID),
secure your mobile Wi-Fi hotspot, and set other options.
1. Touch the Home key > > Settings > Mobile hotspot.
2. Touch > Configure and set the following options.
Network name: Enter or edit a network SSID (name) that
other devices see when scanning for Wi-Fi networks.
Channel: To avoid interference with other Wi-Fi networks,
try using a different channel.
Security: Choose a security option, Open (not
recommended) or WPA2 PSK (other users can access
your mobile hotspot only if they enter the correct
password). When you select WPA2 PSK, touch the
Password field to edit the security password.
Broadcast network name (SSID): Check to broadcast or
uncheck to hide your network name (SSID). If the
broadcast is disabled, other users need to get your
network SSID to find the mobile hotspot.
3. Touch SAVE to save your settings.
NOTE:
To manage your connected mobile hotspot users, touch >
Manage users on the Mobile hotspot screen of your phone.
67
Connecting to Virtual Private Networks
Virtual private networks (VPNs) allow you to connect to the
resources inside a secured local network. VPNs are commonly
deployed by corporations, schools, and other institutions to let
people access local network resources when not on campus, or
when connected to a wireless network.
Depending on the type of VPN you are using, you may be
required to enter your login credentials or install security
certificates before you can connect to your VPN. You can get this
information from your network administrator.
Add a VPN
1. Touch the Home key > > Settings > More > VPN.
2. Touch at the top right corner and fill in the information
provided by your network administrator.
3. Touch SAVE.
The VPN is added to the list on the VPN screen.
NOTE:
You must set a lock screen pattern, PIN or password before
using VPN.
Connect to a VPN
1. Touch the Home key > > Settings > More > VPN.
2. Touch the VPN that you want to connect to.
68
3. When prompted, enter any requested credentials, and then
touch CONNECT.
Modify a VPN
1. Touch the Home key > > Settings > More > VPN.
2. Touch and hold the VPN that you want to modify.
3. Touch Edit profile and edit the VPN settings you want.
4. Touch SAVE.
69
Phone Calls
You can place calls from the Phone app, the Contacts app, or
other apps or widgets that display contact information. Wherever
you see a phone number, you can usually touch it to dial.
Placing and Ending Calls
Place a Call by Dialing
1. Touch the Home key > .
2. Touch and enter the phone number or the contact name
with the dialpad. Touch to delete incorrect digits.
NOTE:
You can touch > One-hand operation on to enable
one-hand operation.
NOTE:
As you enter the phone number or the contact name, your
phone searches for matching information in your contacts. If
you see the number and contact you want to call, touch it to
place the call immediately.
3. Touch below the keypad to dial.
You can also touch the search box at the top of the Phone app
screen and enter the phone number or contact name you want to
call. Touch the matching contact or Call [number] to place the
call.
70
NOTE:
To make an international call, touch and hold the 0 key to enter
the plus (+) symbol. Next, enter the country code, followed by the
city/area code and then the phone number.
NOTE:
To redial the last call you made, just touch the Home key > >
> and touch again.
End a Call
During a call, touch on the screen.
Answering or Rejecting Calls
When you receive a phone call, the incoming call screen opens,
displaying the caller ID or the information about the caller that
you've entered in the Contacts app. You can answer or reject the
call, or reject it with a text message.
Answer a Call
When you receive a phone call, slide down the green bar
to answer the call.
NOTE:
To silence the ringer before answering the call, you can press the
Volume key, the Power key, the Home key, the Back key, or the
Recent apps key.
71
Reject a Call
When you receive a phone call, slide up the red bar to
reject the call.
You can also slide up to reject the call and select a preset
text message or edit one to send to the caller.
NOTE:
To edit the preset text response from within the Phone app, touch
in the top search field and select Settings > General
settings > Quick responses.
Working With the Call History
The call history is a list of all the calls you've placed, received, or
missed. It provides a convenient way to redial a number, return a
call, or add a number to your contacts.
To open the call history, you can touch the Home key > >
(in the top search field) > Call History.
Place a Call From the Call History
1. Open the call history.
2. Touch beside a listing to call back.
NOTE:
You can touch MISSED, OUTGOING, or INCOMING to filter the
records by call type.
72
Add a Number From Call History as a Contact
1. Open the call history.
2. Touch the contact icon in front of a listing.
3. Touch on the contact information tab.
4. To add the number to an existing contact, touch a contact in
the list. To add a new contact, touch at the top right
corner.
Take Other Actions on a Call History Entry
Open the call history and touch a listing to view more call
information.
Touch to delete the entry.
While viewing the call details, touch > Edit number before
call to edit the number in the dialer before calling it.
Touch the contact icon in front of the entry to open the contact
information tab from the bottom, where you can send a
message, call back, edit the contact, add the contact to
favorites, or add the number to contacts.
NOTE:
You can touch > Clear call log in the call history screen to
delete all history records.
73
Calling Your Contacts
1. Touch the Home key > . Your favorite contacts and
frequently called contacts are displayed in the SPEED DIAL
tab.
2. Touch a contact to place the call, or touch or swipe to the
CONTACTS tab to view all your contacts and touch
beside a contact to make a call.
Checking Voicemail
If you have set the phone to divert calls to voicemail, callers can
leave voicemail messages when they cannot reach you. Here’s
how to check the messages they left.
1. Touch the Home key > > .
2. Touch and hold the 1 key in the dialer. If prompted, enter your
voicemail password.
3. Follow the voice prompts to listen to and manage your
voicemail messages.
NOTE:
See Set Voicemail for how to set your voicemail service. For
detailed information, please contact the service provider.
Using Options During a Call
During a call, you will see a number of onscreen options. Touch
an option to select it.
74
Touch to view all call options.
Touch to switch to the keypad when you need to enter a
code (for example, the PIN for your voicemail or bank
account) during the call.
Touch / to mute or unmute your microphone.
Touch / to turn on or off the speaker.
Touch to make another call separately from the first call,
which is put on hold.
Touch to open the Contacts app.
Touch to open the Messaging app.
Touch to put the call on hold.
Touch to put the caller you are speaking to on hold, and
switch to the other call that has been put on hold.
Touch to merge the separate calls into a single
conference call.
Touch to end the current call.
WARNING!
Because of higher volume levels, do not place the phone near
your ear during speakerphone use.
75
Managing Multi-party Calls
When the call waiting and three-way call features are available,
you can switch between two calls or set up a conference call.
NOTE:
The call waiting and three-way call features need network
support and may result in additional charges. Please contact your
service provider for more information.
Switch Between Current Calls
When you’re on a call and another call comes in, your phone
screen informs you and displays the caller ID.
To respond to an incoming call while you’re on a call:
Touch (Hold current and answer) to answer the call.
(This puts the first caller on hold and answers the second
call.)
Touch (End current and answer) to answer the
second call and end the first one.
Touch to reject the second call.
Touch to reject the second call and select a preset text
message or edit one to send to the caller.
To switch between two calls:
Touch > to switch back to the other call.
76
Set Up a Conference Call
With this feature, you can talk to two people at the same time.
1. Place the first call.
2. Once you have established the connection, touch >
and dial the second number. (This puts the first caller on hold.)
3. When you’re connected to the second party, touch >
.
If one of the people you called hangs up during your call, you and
the remaining caller stay connected. If you initiated the call and
are the first to hang up, all callers are disconnected.
To end the conference call, touch .
Adjusting Your Call Settings
Set Contact Display Options
You can set the order of the contacts displayed in the
CONTACTS tab of the Phone app.
1. Touch the Home key > > (in the top search field) >
Settings > General settings.
2. Touch Sort by or Name format to set the order of the
contacts and the format of the contact names.
77
Set Sound and Vibration
Set the sound and vibration for incoming calls as well as dialpad
sounds.
1. Touch the Home key > > (in the top search field) > Settings > General settings.
2. In the Sounds and vibrate section, touch the option you
want to configure.
Touch Phone ringtone to select the ringtone for incoming
call notification.
Check Dialpad tones to play sounds when you touch the
dialpad keys.
Check Also vibrate for calls to enable vibration for
incoming call notification.
NOTE:
You can set the vibration pattern for incoming call notification.
Touch the Home key > > (in the top search field) >
Settings > Call settings > Vibrate pattern and select one.
Edit Quick Response to Rejected Callers
1. Touch the Home key > > (in the top search field) >
Settings > General settings > Quick responses.
2. Touch a text message to edit it.
78
Internet Call Settings
To add an Internet calling account:
1. Touch the Home key > > (in the top search field) >
Settings > Call settings > Phone account settings.
2. Touch SIP accounts and touch ADD ACCOUNT at the top
right.
3. Follow the instructions from your Internet calling service
provider to configure the settings for your account.
4. Touch SAVE.
To configure which calls use Internet calling:
You can configure your phone to use Internet calling (via Wi-Fi or
mobile data) to place all calls or just calls to Internet calling
addresses.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > Phone account settings.
2. Touch Make calls with.
3. Select the option you need.
If you want to use Internet calling for all calls, touch your
SIP account.
If you only want to use Internet calling for calls to Internet
call accounts, touch your mobile network.
If you want to make a choice each time you make a call,
touch Ask first.
79
To automatically stop Internet calls:
You can configure the phone to automatically stop Internet calls
when the other party does not support Internet calling.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > Phone account settings.
2. Touch Use SIP calling > Only for SIP calls.
To configure your phone to receive Internet calls:
By default, your phone is configured to make Internet calls, but
not to ensure that you will receive them. But you can configure
your phone to listen for Internet calls made to an Internet calling
account you added to your phone.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > Phone account settings.
2. Check Receive incoming calls. Checking this setting will
reduce your battery life between charges.
Set Voicemail
1. Touch the Home key > > (in the top search field) >
Settings > Call settings.
2. Touch Voicemail to configure voicemail settings.
Touch Service to select the voicemail service provider.
Your carrier is the default.
Touch Setup > Voicemail number to edit the voicemail
number.
Touch Sound to select the notification sound for new
voicemails.
80
Check Vibrate to enable vibration for notification.
Use Fixed Dialing Numbers
Fixed Dialing Numbers (FDN) allows you to restrict outgoing calls
to a limited set of phone numbers.
1. Touch the Home key > > (in the top search field) > Settings > Call settings.
2. Touch Fixed Dialing Numbers and the following options are
available.
Enable FDN: Input the PIN2 code to enable the FDN
feature.
Change PIN2: Change the PIN2 code for FDN access.
FDN list: Manage the FDN list.
NOTE:
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code more times than allowed can get your nano-SIM card
locked. Contact the service provider for assistance.
Set TTY Mode
Your phone is a TTY compatible device. A TTY device can allow
people who have hearing or speech disabilities to communicate
by telephone. Simply connect the TTY device to the phone’s
headset jack.
Select a TTY mode for your phone to work with a TTY device, or
turn TTY off.
1. Touch the Home key > > (in the top search field) >
Settings > Call settings > TTY mode.
81
2. Select one of the following options. Consult your
teletypewriter manufacturer’s manual if necessary.
TTY Off: Users who can hear and talk can disable TTY
support.
TTY Full: Users who cannot talk or hear may use this
mode to send and receive text messages through TTY
device.
TTY HCO: Users who can hear, but cannot talk, may use
this mode to listen to conversation of the other party, and
respond via text messages.
TTY VCO: Users who can talk, but cannot hear, may use
this mode to talk through the phone and receive
responses via text messages.
Set Hearing Aids
Your phone supports the Hearing Aid Compatibility (HAC)
function. When you turn on the hearing aid compatibility and use
a hearing aid with a telecoil to answer the phone, it will help you
hear more clearly during the phone call.
1. Touch the Home key > > (in the top search field) >
Settings > Call settings.
2. Check Hearing aids to turn on hearing aid compatibility.
CAUTION:
Do not turn on the Hearing aids option unless you use a hearing
aid with a telecoil. Using this setting without a hearing aid or with
a hearing aid without a telecoil may be harmful to your hearing.
82
Set Speed Dials
You can touch and hold the 1 ~ 9 keys from the dialer to call the
corresponding speed dial number.
The number key 1 is reserved to speed dial your voicemail.
To assign a speed dial key:
1. Touch the Home key > > (in the top search field) >
Settings > Call settings > Speed dial.
2. Touch a speed dial key.
3. Enter a phone number or select one from the contact list.
4. Touch OK.
Set DTMF Tones
You can set the length of Dual-tone multi-frequency (DTMF)
signal tones.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > DTMF tones.
2. Touch Normal or Long.
Call Ended Operation Tips
When this feature is enabled, the phone will prompt you to call
back, send a message to the contact, or add the new number to
your contacts after you finish a call.
1. Touch the Home key > > (in the top search field) > Settings > Call settings.
2. Check Call ended operation tips to enable this feature.
83
Bar Certain Calls
Call barring feature allows you to forbid certain types of calls from
your phone.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > Call Barring Settings.
2. Set the restriction of specific types of calls from your phone.
Forward Incoming Calls
Call forwarding feature allows you to forward your incoming calls
to another phone number.
1. Touch the Home key > > (in the top search field) > Settings > Call settings > Call forwarding.
2. Touch an available option (Always forward, When busy,
When unanswered, or When unreachable) to enable it.
Other Options
1. Touch the Home key > > (in the top search field) >
Settings > Call settings > Additional settings.
2. Touch Caller ID to choose whether your number is displayed
when someone receives your outgoing call. Or check Call waiting to get notified of incoming calls during a call.
NOTE:
Please contact the service provider to check whether the caller
ID and call waiting features are available.
84
Contacts
You can add contacts on your phone and synchronize them with
the contacts in your Google account or other accounts that
support contact syncing.
To see your contacts, touch the Home key > . From there,
you can touch the tabs on the top of the screen to quickly switch
to contact groups or favorite contacts.
Checking Contact Details
1. Touch the Home key > and touch the CONTACTS tab
to access your contact list.
2. Scroll through the list to view all your contacts.
3. Touch a contact to view its details.
NOTE:
If you have a lot of contacts stored, you'll see a slider on the right
side of the screen. Drag the slider to the initial letter you need.
Adding a New Contact
1. Touch the Home key > .
2. Touch to add a new contact.
85
3. Touch the account field near the top of the screen to choose
where to save the contact. If a sync account is selected, the
contacts will be synced automatically with your account
online.
4. Enter the contact name, phone numbers, email addresses,
and other information. Touch ADD ANOTHER FIELD to
add more information if you want.
5. Touch to save the contact.
Setting Up Your Own Profile
You can create your own name card in your phone.
1. Touch the Home key > and touch the CONTACTS tab.
2. Touch Set up my profile.
If a profile has already been set up, touch the listing below
ME and touch .
3. Edit your profile information.
4. Touch .
86
Importing, Exporting, and Sharing
Contacts
You can import/export contacts from/to your nano-SIM card or
the phone storage. This is especially useful when you need to
transfer contacts between different devices. You can also quickly
share contacts using Bluetooth, Google Drive, Wi-Fi Direct, Email,
Gmail, or Messaging.
3. If you have added contact accounts other than the phone,
select an account in which to save the contacts.
4. Touch > Import SIM Contacts.
5. Check the contacts you need and then touch .
Import Contacts From the Phone Storage
1. Touch the Home key > .
2. Touch > Import/Export > Import from storage.
3. If you have added contact accounts other than the phone,
select an account in which to save the contacts.
4. Select the vCard file(s) and touch OK.
87
Export Contacts to the nano-SIM Card
1. Touch the Home key > .
2. Touch > Import/Export > Export to SIM card.
3. Check the contacts you need and then touch .
Export Contacts to the Phone Storage
1. Touch the Home key > .
2. Touch > Import/Export > Export to storage.
3. The phone will prompt you with the name of the vCard file and
the directory in which the file will be saved. Touch OK to
create the file.
Share Contacts
1. Touch the Home key > and touch the CONTACTS tab.
2. Touch > Multi-Select.
3. Check the contacts you want to share and then touch .
4. Choose how to share the contacts. Options depend on the
applications and services installed.
Working With Favorite Contacts
In the favorite contacts tab, you can find your favorite contacts
and frequently contacted contacts.
88
Add a Contact to Favorites
You can add the contacts you use frequently to FAVORITES so
that you can find them quickly.
1. Touch the Home key > and touch the CONTACTS tab.
2. Touch a contact and then touch at the top.
Remove a Contact From Favorites
1. Touch the Home key > and touch the FAVORITES tab.
2. Touch a favorite contact and then touch at the top.
Working With Groups
View Your Contact Groups
1. Touch the Home key > and touch the GROUPS tab.
2. Scroll through the list to view the preset groups and any
groups you have created.
3. Touch a group to view its members.
NOTE:
To send a message or an email to all or some of the group
members, you can touch > Send Group message / Send
Group email after you open the group.
89
Set Up a New Group
1. Touch the Home key > and touch the GROUPS tab.
2. Touch to create a new group.
3. If you have added contact accounts other than the phone,
select an account for the new group.
4. Touch the Group’s name field and enter the group name.
5. Touch Add member and select the contacts you wish to be
the group members.
6. Touch .
7. Touch the field below RingTone to select the ringtone for
incoming calls from the group members.
8. Touch OK.
9. Touch to save the group.
Delete a Group
1. Touch the Home key > and touch the GROUPS tab.
2. Touch a group and then touch > Delete Group.
3. Touch OK to disband the group. The contacts in the group
will not be deleted.
90
Edit a Group
1. Touch the Home key > and touch the GROUPS tab.
2. Touch a group and then touch > Edit.
3. Touch the group name to edit it, or touch the field below
MEMBER or RingTone to add more members or change
the ringtone.
4. Touch .
NOTE:
To remove group members, touch a group in the GROUPS tab
and touch > Multi-Select to choose members. Then touch
> OK.
Searching for a Contact
1. Touch the Home key > .
2. Touch at the top of the screen.
3. Input the contact name or any information the contact has
to search for it. The contacts matched will be listed.
91
Editing Contacts
Edit Contact Details
1. Touch the Home key > .
2. Touch a contact you need to edit and then touch .
3. Edit the contact and touch .
Set a Ringtone for a Contact
Assign a special ringtone to a contact, so you know who is
calling when you hear the ringtone.
1. Touch the Home key > .
2. Touch a contact you want to set a ringtone for and then
touch > Set ringtone.
3. Select a ringtone you like and touch OK.
Delete Contacts
1. Touch the Home key > and touch the CONTACTS tab.
2. Touch > Multi-Select.
3. Check the contacts you want to remove and then touch .
4. Touch OK to confirm.
92
Join Contacts
As your phone synchronizes with multiple online accounts, you
may see duplicate entries for the same contact. You can merge
all the separate information of a contact into one entry in the
contacts list.
1. Touch the Home key > .
2. Touch a contact entry to display the contact’s details and then
touch .
3. Touch > Join.
4. Touch the contact whose information you want to join with the
first entry.
5. Touch .
The information from the second contact is added to the first
contact, and the second contact is no longer displayed in the
contacts list.
You can repeat these steps to join another contact to the main
contact.
Separate Contact Information
If contact information from different sources was joined in error,
you can separate the information back into individual contacts on
your phone.
93
1. Touch the Home key > .
2. Touch a contact entry you have merged and want to separate,
and then touch .
3. Touch > Separate.
4. Touch OK to confirm.
94
Web Accounts
Adding or Removing Accounts
You can add multiple Google accounts and Microsoft Exchange
ActiveSync® accounts. You may also add other kinds of
accounts depending on the apps installed on your phone.
Add an Account
1. Touch the Home key > > Settings > Accounts > Add
account.
2. Touch the type of account you want to add.
3. Follow the onscreen steps to enter the information about the
account. Most accounts require a username and password,
but the details may vary. You may also need to obtain some
information from IT support or your system administrator.
When the account is successfully added, it is displayed in the
Accounts menu.
Remove an Account
Removing an account will delete it and all information
associated with it from your phone, such as emails and
contacts.
1. Touch the Home key > > Settings > Accounts.
2. Touch the account category and then touch the account.
95
3. Touch > Remove account > REMOVE ACCOUNT.
Configuring Account Sync
Configure Auto Sync Setting
1. Touch the Home key > > Settings > Accounts.
2. Touch and check or uncheck Auto-sync data.
When automatic sync is turned on, changes you make
to information on your phone or on the web are
automatically synced with each other.
When automatic sync is turned off, you need to sync
manually to collect emails, updates, or other recent
information.
Sync Manually
1. Touch the Home key > > Settings > Accounts.
2. Touch the account category and then the account you want
to sync.
3. Touch > Sync now. Or touch the types of information you
want to sync.
96
Change an Account’s Sync Settings
1. Touch the Home key > > Settings > Accounts.
2. Touch the account category and then the account. The
Sync screen appears, showing a list of information the
account can sync.
3. When auto-sync is enabled, switch on or off items as you
need. The types of information enabled on the phone and
the web will be kept in auto-sync. When auto-sync is
disabled, touch a listing to sync that type of information
between the phone and the web.
97
Email
Touch in the home screen and select Email. Use it to
receive and send emails from your webmail or other accounts,
using POP3 or IMAP, or access your Exchange ActiveSync
account for your corporate email needs.
Setting Up the First Email Account
1. Touch the Home key > > Email.
2. Select an email server and enter the email address and
password.
3. Touch Next to let the phone retrieve the network parameters
automatically.
NOTE:
You can also enter these details manually by touching
Manual setup or when automatic setup fails.
4. Follow the on-screen instructions to finish the setup.
Your phone will show the inbox of the email account and start to
download email messages.
Checking Your Emails
Your phone can automatically check for new emails at the
interval you set when setting up the account.
98
You can also check new emails manually by dragging down on
the message list.
To check earlier emails for your IMAP or POP3 accounts, swipe
upwards to the bottom of the message list and touch Load
more messages.
Responding to an Email
You can reply to or forward a message that you receive. You
can also delete messages and manage them in other ways.
Reply to or Forward an Email
1. Open the email you want to reply to or forward from the Inbox.
2. Do the following as you need:
To reply to the sender, touch .
To reply to the sender and all recipients of the original
email, touch .
To forward the email to someone else, touch .
3. Edit your message and touch .
Mark an Email as Unread
You can return a read email to the unread state - for example, to
remind yourself to read it again later. You can also mark a batch
of emails as unread.
99
While reading a message, touch > Mark as unread.
While in a message list (for instance, the Inbox), touch the
checkboxes before the messages and then touch .
Delete an Email
You can delete an email from its folder. You can also delete a
batch of emails.
While reading a message, touch > OK.
While in a message list (for instance, the Inbox), touch the
checkboxes before the messages and then touch > OK.
Writing and Sending an Email
1. Open your email Inbox and touch .
NOTE:
If you have more than one email account added on the
phone, touch the sender line to select the account you want
to use for sending the message.
2. Enter a contact name or email address in the To field.
Separate each recipient with a comma. You can also touch
to select recipients from your contacts.
NOTE:
Touch >Add Cc/ Bcc to send a carbon copy or blind
carbon copy to other recipients.
100
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.