Thank you for choosing this ZTE mobile device. In order to keep your device in its best condition, please read this
manual and keep it for future reference.
No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. This manual has been designed with the utmost care to ensure the accuracy of its content. However,
all statements, information and recommendations contained therein do not constitute a warranty of any kind, either
expressed or implied. Please refer to chapter For Your Safety to be sure to use your phone properly and safely.
We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com)
for more information on self-service and supported product models. Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the
software.
Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ
from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth
ZTE Corporation is under license.
microSDHC Logo is a trademark of SD-3C, LCC.
Other trademarks and trade names are the property of their respective owners.
Edition Time: May 2013
Manual No.: Z081704100115
®
trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by
Table of Contents
Getting Started ................................................ 5
Installing the Battery and a microSDHC™ Card .... 5
Charging the Battery ............................................ 6
Switching Your Phone On/Off ................................ 6
Setting Up Your Phone for the First Time ............... 6
Locking/Unlocking the Screen and Keys................. 7
Using the Touch Screen ........................................ 7
Getting to Know Your Phone ................................ 8
Switch off your phone before installing or replacing the
battery. You have the option to install a microSDHC
card of up to 32GB to expand your phone’s storage
capacity.The microSDHC card can be installed and
removed while the phone is turned on. Unmount the
microSDHC card before removing it.
1. Place your finger in the slot at the bottom of the
back cover to lift and remove the cover.
2. Insert the battery by aligning the metal contacts on
the battery with the gold contacts in the battery
compartment. Gently push down on the battery until
it clicks into place.
WARNING! Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
3. Hold your microSDHC card with the metal contacts
facing down and slide it into the microSDHC card slot.
NOTE: Your phone comes with a pre-installed
microSDHC card. Some applications may not
function normally after you remove the card, preinstalled or otherwise.
4. Press the cover gently back into place until you hear
a click.
4
5
Getting Started
Getting Started
Charging the Battery
WARNING! Use only ZTE-approved chargers and
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
1. Connect the adapter to the charging port. Ensure
that the adapter is inserted with the correct
orientation. Do not force the connector into the
charging port.
2. Connect the charger to a standard AC wall outlet. If
the phone is on, you’ll see a charging icon, such as
, appear in the Status Bar.
or
3. Disconnect the charger when the battery is fully
charged.
Switching Your Phone On/O
• Press and hold the Power/Lock Key to turn on
your phone.
6
• To turn it off, press and hold the Power/Lock Key
to open the options menu. Tap Power off and then
tap OK.
Setting Up Your Phone for
the First Time
When you first power on your phone after you purchase
it or reset it to factory settings (see Settings – Personal – Backup and Reset), you may need to set it up before
using it.
1. Tap the language field, select the language you
want, and tap Start.
2. Set the date, time, and time zone, or use date and
time data provided by the network. Then tap Next.
3. If you have a Google™ account, tap Yes to sign in.
Tap No if you do not have an account. Tap Get an
account to create a Google account or tap Not
now to set up an account later.
4. Configure the Google location options and tap Next.
5. Enter your name, which the phone uses to
personalize some apps, and then tap Next.
6. You will be prompted to accept the Google terms of
service. Tap Next to continue.
7. Tap Finish to complete the setup.
NOTE: If the phone is not activated, it would prompt
you to connect to a Wi-Fi network before asking you to
sign in to a Google account.
Locking/Unlocking the
Screen and Keys
Your phone allows you to quickly lock the screen and
keys (put the phone into Sleep mode) when not in use,
and also to turn the screen back on and unlock it when
you need it.
To lock the screen and keys:
To quickly turn the screen off and lock the keys, press
the Power/Lock Key.
NOTE: To save battery power, the phone
automatically turns off the screen after a certain period
of time when you leave it idle. You will still be able to
receive messages and calls while the phone screen
is off.
To unlock the screen and keys:
1. Press the Power/Lock Key to turn the screen on.
2. Tap and hold
NOTE: If you have set an unlock pattern, PIN,
or password for your phone (see Personalizing –
Protecting Your Phone With Screen Locks), you’ll need
to draw the pattern or enter the PIN/password to
unlock your screen.
at the center of the screen.
Using the Touch Screen
Your phone’s touch screen lets you control actions
through a variety of touch gestures.
• Tap – When you want to type using the on-screen
keyboard, select items on-screen (such as application
and settings icons), or press on-screen buttons,
simply tap them with your finger.
• Tap and Hold – To open the available options for
an item (for example, a message or link in a web
page), tap and hold the item.
• Swipe or Slide – To swipe or slide means to
quickly drag your finger vertically or horizontally
across the screen.
• Drag – To drag, press and hold your finger with
some pressure before you start to move your finger.
While dragging, do not release your finger until you
have reached the target position.
• Pinch – In some apps (such as Maps, Browser, and
Gallery), you can zoom in and out by placing two
fingers on the screen at once and pinching them
together (to zoom out) or spreading them apart (to
zoom in).
• Rotate the screen – For most screens, you can
automatically change the screen orientation from
portrait to landscape by turning the phone sideways.
7
Getting Started
Getting Started
Getting to Know Your Phone
3.5mm
Headset Jack
Earpiece
Volume
Up/Down Keys
Touch
Screen
Micro USB
Charging Port
Back Key
MicrophoneHome Key
8
Power/Lock
Key
Flashlight
Battery Cover
Menu Key
Camera
Speaker
Microphone
Key Functions
KeyDescription
Power/Lock Key Press and hold to turn on or off Airplane mode, enable silent mode/vibration mode/sound,
Home KeyPress to return to the Home Screen from any application or screen.
Menu Key
Back Key Press to go to the previous screen.
Volume KeysPress or hold to turn the volume up or down.
or to power off.
Press to switch your phone to Sleep mode.
Press to wake up your phone.
Press and hold to see recently used applications.
Press for current screen options.
9
Getting Started
Personalizing
Home Screen
You can customize your Home Screen. Set your own
wallpaper, add the widgets or application shortcuts you
need, or remove them as you like.
Status &
Notifications
Shortcuts
Tap to open
the dialer
Tap to open
contacts
10
Tap to open
the main menu
Wallpaper
Widget
Tap to open
the web
browser
Tap to open
messaging
Extended Home Screen
Your Home Screen extends beyond the initial screen,
providing more space to add icons, widgets, and more.
Simply swipe left or right on the screen to see the
extended Home Screens.
Adding or Removing an Extended
Home Screen
1. Press the Home Key to return to the Home Screen.
2. Press the Menu Key > Customization > Screen edit.
to add more extended Home Screens. Tap
3. Tap
on a thumbnail to remove a screen.
Adjusting the Order of an Extended
Home Screen
1. Press the Home Key to return to the Home Screen.
2. Press the Menu Key > Customization > Screen edit.
3. Tap and hold a thumbnail and drag it to the place
you need.
Changing the System
Language
1. Press the Home Key > Menu Key > System
settings > Language & input > Language.
2. Select the language you need.
Changing the Ringtone
You can customize the default ringtone for incoming
calls by taking the following steps.
1. Press the Home Key > Menu Key > Customization.
2. Tap Phone ringtone.
3. Tap the RINGTONE, MUSIC, or RECORD tab.
4. Scroll through the list and select the audio file you’d
like to use.
5. Tap OK.
TIP: See People – Editing Contacts – Setting a
Ringtone for a Contact for how to assign a special
ringtone to an individual contact.
Changing the Notification
Sound
You can customize the default notification sound by
taking the following steps.
1. Press the Home Key > Menu Key > Customization.
2. Tap Notification ringtone.
3. Tap the RINGTONE, MUSIC, or RECORD tab.
4. Scroll through the list and select the audio file you’d
like to use.
5. Tap OK.
Turning On/O Touch
Sounds
1. Press the Home Key > Menu Key > System
settings > Sound.
2. Check or uncheck Touch sounds.
Adjusting Volumes
1. Press the Home Key > Menu Key > System
settings > Sound > Volumes.
2. Drag the sliders to adjust the volume for each type
of audio.
3. Tap OK to save.
TIP: You can adjust the media volume when a media
application is in use by pressing the Volume Up/
Down Keys. If no media application is active, press the
Volume Up/Down Keys to adjust ringtone volume (or
the earpiece volume during a call).
11
PersonalizingPersonalizing
Switching to Silent Mode
You can set the phone to silent mode by using one of
the following methods:
• Press and hold the Power/Lock Key and then tap
to enable silent mode, tap to enable silent
mode with vibration, or tap to disable silent mode.
• Keep pressing the Volume Down Key when no
media application is active. When the
appears in the Status Bar, the phone is set to silent
mode with vibration. When the
the Status Bar, the phone is in silent mode.
• Press the Home Key > Menu Key > System
settings > Sound > Silent mode, and tap
Vibrate or Mute.
icon
icon appears in
Applying New Wallpapers
You can set the wallpaper for the Home Screen or Lock
Screen.
1. Press the Home Key > Menu Key > Wallpaper.
2. Tap Home or Lock screen.
3. Select a wallpaper source from Gallery, Live
Wallpapers, or Wallpapers and choose the image
or animation you want to use as the wallpaper.
Some cropping may be needed for Gallery images.
4. Tap SET WALLPAPER.
NOTE: Live Wallpapers are not available for the Lock
Screen.
1213
Changing the Screen
Brightness
1. Press the Home Key > Menu Key > System
settings > Display > Brightness.
2. Check the Automatic brightness box to make the
phone adjust the screen brightness automatically,
or clear the check box to adjust the brightness
manually.
3. Tap OK.
Protecting Your Phone With
Screen Locks
You can protect your phone by creating a screen lock.
When enabled, you need to draw a pattern or enter a
numeric PIN or password to unlock the phone’s screen
and keys.
1. Press the Home Key > Menu Key > System settings > Security.
2. Tap Screen lock.
3. Tap Pattern, PIN, or Password.
• If you tap Pattern, you’ll need to create a pattern
you must draw to unlock the screen. The first time
you do this, a short tutorial about creating an
unlock pattern appears. Then you’ll be prompted
to draw and redraw your own pattern.
• If you tap PIN or Password, you’ll be prompted
to set a numeric PIN or a password that you must
enter to unlock your screen.
The next time you turn on your phone or wake up the
screen, you must draw your unlock pattern or enter your
PIN or password to unlock it.
IMPORTANT: If you forget the pattern you set, try
five times and tap Forget pattern? to sign in to the
Google account you have added on the phone and
reset the screen lock. You will need an active Internet
connection. You can also upgrade the phone software
(see Settings – System – About Phone).
Protecting Your Phone With
Encryption
You can encrypt all the data on your phone: Google
accounts, application data, music and other media,
downloaded information, and so on. If you do, you must
enter a numeric PIN or password each time you power
on your phone.
WARNING! Encryption is irreversible. The only way
to revert to an unencrypted phone is to perform a
factory data reset, which erases all your data.
Encryption provides additional protection in case your
phone is stolen, and may be required or recommended
in some organizations. Consult your system
administrator before turning it on. In many cases the
PIN or password you set for encryption is controlled by
the system administrator.
Before turning on encryption,
prepare as follows:
1. Set a lock screen PIN or password.
2. Charge the battery.
3. Keep the phone connected to the charger.
4. Schedule an hour or more for the encryption process.
You must not interrupt it or you will lose some or all
of your data.
When you’re ready to turn on
encryption:
1. Press the Home Key > Menu Key > System
settings > Security > Encrypt phone.
2. Read the information about encryption carefully.
The Encrypt phone button is dimmed if your
battery is not charged or your phone is not plugged
in. If you change your mind about encrypting your
phone, press the Back Key.
WARNING! If you interrupt the encryption
process, you will lose data.
3. Tap Encrypt phone.
4. Enter your lock screen PIN or password and tap
Next.
5. Tap Encrypt phone again.
The encryption process starts and displays its progress.
Encryption can take an hour or more, during which time
your phone may restart several times.
When encryption is complete, you’ll be prompted to
enter your PIN or password.
Subsequently, you must enter your PIN or password
each time you power on your phone to decrypt it.
Knowing the Basics
Knowing the Basics
Monitoring the Phone Status
The Status Bar at the top of the Home Screen provides phone and service status icons on the right side.
Below are some of the icons you may see.
Indicators and Icons
Indicator
14
G
E
3G
/
What it means
GPRS connected
EDGE connected
3G connected
Flight mode
Battery empty
Battery low
Battery partially drained
Battery full
Battery charging
Alarm set
Indicator
What it means
Signal strength
No signal
Mobile data in use
Ringer off
Vibrate mode
Bluetooth on
Connected to a Wi-Fi network
Wi-Fi in use
Wired headset connected
Managing Notifications
The Status Bar at the top of the Home Screen provides notification icons on the left side. Below are some of
the icons you may see.
Indicators and Icons
Indicator
/
What it means
New SMS
New MMS
New Email
New Gmail message
New Google Talk instant message
Problem with SMS/MMS delivery
Missed call
Call in progress
USB connected
Song is playing
Indicator
What it means
microSDHC card unmounted
microSDHC card removed
Upcoming event
Call on hold
New Wi-Fi network detected
Downloading data
Sending data
GPS on
Updates available
15
Knowing the Basics
Knowing the Basics
Opening/Closing the Notification
Panel
Notifications report the arrival of new messages,
calendar events, and alarms, as well as ongoing events.
You can open the Notification Panel to view the details
of notifications.
• To open the Notication Panel, swipe your nger
down from the top of the screen.
• To close the Notication Panel, swipe your nger up
from the bottom of the screen or tap the Back Key.
Responding to or Removing
a Notification
In the Notification Panel, you can respond to a
notification or remove the notifications.
• To respond to a notication, tap it.
• To remove a notication, swipe it left or right.
• To remove all notications, tap
right corner.
• Most apps that send notications, such as Gmail,
have notification settings that you can adjust.
TIP: In the Notification Panel, tap
notifications list to get to the Settings menu quickly.
in the top
at the top of
Using Quick Settings
The Quick Settings in the Notifications panel make
it convenient to view or change the most common
settings for your phone.
16
Open the Notifications panel and you can find the
following Quick Settings on the top of the screen. Slide
left or right to view the setting options.
• Auto-rotate: Tap to turn on or off the Auto-rotate
screen feature.
• Sound: Tap to turn on or off vibration.
• Wi-Fi: Tap to turn on or off Wi-Fi.
• Data: Tap to enable or disable data access over the
mobile network.
• Bluetooth: Tap to turn on or off Bluetooth.
• GPS: Tap to turn on or off GPS function.
• Sync: Tap to turn on or off account sync.
• Airplane mode: Tap to turn on or off the
Airplane mode.
• Brightness: Tap to adjust the screen brightness.
Managing Shortcuts and
Widgets
Adding Shortcuts and Widgets
1. Press the Home Key > .
2. Tap Widgets or Shortcuts to view the available
widgets and shortcuts.
3. Tap and hold a widget or shortcut and drag it to the
Home Screen.
Moving Shortcuts or Widgets
1. Tap and hold a widget or shortcut on the Home
Screen.
2. Drag it to the place you need.
Removing Shortcuts or Widgets
1. Tap and hold a widget or shortcut on the Home
Screen.
2. Drag it to
to remove it.
Adjusting Widget Size
1. Tap and hold a widget on the Home Screen and then
release it.
2. An outline appears around the widget. Drag the
outline to resize the widget.
NOTE: Not all widgets can be resized.
Organizing With Folders
You can create folders on the Home Screen and add
several shortcuts in a folder.
Creating a Folder
1. Tap and hold the shortcut on the Home Screen you
want to add into a folder until
2. Drag the shortcut to
will be created and the shortcut is added to the
folder.
Renaming a Folder
1. Tap a folder to open it.
2. Tap the folder name field and enter a new name.
Adding Shortcuts to a Folder
1. Tap and hold a shortcut and then drag it onto a
folder icon.
2. Release the shortcut and it will be added into the
folder.
appears.
and release it. A new folder
Removing Shortcuts From a Folder
1. Tap a folder to open it.
2. Tap and hold the shortcut you want to remove and
then drag it to the Home Screen.
3. Release the shortcut and it will be removed from
the folder.
Rearranging the Favorites
Tray
The Home Screen includes a customizable favorites tray
at the bottom of all Home Screens. You can drag apps,
shortcuts, folders, and other priority items in or out of the
favorites tray for instant access from any Home Screen.
Removing Items From the Favorites
Tray
Tap and hold an item in the favorites tray and drag it out
of the tray.
Adding Items to the Favorites Tray
Tap and hold an item on the Home Screen and drag it
into the favorites tray.
If the favorites tray is full, you need to remove an item
in the tray.
17
Knowing the BasicsKnowing the Basics
• Tap
Entering Text
You can enter text using the on-screen keyboard. Some
apps open it automatically. In others, you open it by
tapping where you want to type. You can press the
Back Key to hide the on-screen keyboard.
Android Keyboard
The Android Keyboard provides a layout similar to a
desktop computer keyboard. Turn the phone sideways
and the keyboard will change from portrait to
landscape. The landscape keyboard is not supported in
all applications.
to use uppercase. Double-tap to lock
uppercase. This key also changes to indicate the
current case you are using:
uppercase, and
to delete the text before the cursor.
• Tap
to select numbers and symbols. You can then
• Tap
tap
to find more. Also, often-used symbols are
displayed above the keyboard.
• Tap and hold
emoticons.
• Tap
• Tap and hold
access the Android keyboard settings.
and then swipe to choose the
to use Google’s networked voice input.
to change the input language or
for lowercase, for
when locked in uppercase.
Google Voice Typing
Use Google’s networked voice input.
Touch Input Settings
Choose the touch input settings by pressing the Home
Key > Menu Key > System settings > Language
& input.
In the KEYBOARD & INPUT METHODS section,
• Tap the alphabetic keys to enter letters. Tap and hold
some specific keys to enter associated accented
letters or numbers. For example, to enter è, tap and
hold
and the available accented letters and
number 3 appear. Then slide to choose è.
1819
you can set the default input method and choose the
settings for input methods.
Editing Text
• Move the insertion point: Tap where you want to
type. The cursor blinks in the new position, and a tab
appears below it. Drag the tab to move the cursor.
• Select text: Tap and hold or double-tap within the
text. The nearest word highlights, with a tab at each
end of the selection. Drag the tabs to change the
selection.
• Cut or copy: Select the text you want to
manipulate. Then tap the Cut
to cut or copy the text to the clipboard.
• Replace text with the clipboard text: Select the
text you want to replace. Then tap
• Insert text from the clipboard: Move the cursor
to the insertion point and then tap and hold the
tab below the cursor. Release your finger and tap
PASTE.
or Copy button
or PASTE.
Opening and Switching Apps
Opening an App
1. Press the Home Key > .
2. Slide left or right on the screen and tap an app to
open it.
Switching Between Recently
Opened Apps
1. Press and hold the Home Key. A list of the names
and thumbnails of apps you’ve recently used opens.
If you’ve been using more apps recently than can fit
on the screen, you can scroll the list up and down.
2. Tap a thumbnail to open that app. You can swipe a
thumbnail sideways to remove it from the list.
Connecting to Networks and Devices
Connecting to Networks and Devices
Connecting to Mobile
Networks
Control Mobile Data Use
To enable or disable Data Access:
1. Press the Home Key > Menu Key > System
settings > Mobile networks.
2. Check Data enabled to enable data access over
the mobile network. Clear the check box to disable
data access.
To enable Always-on Data Access:
1. Press the Home Key > Menu Key > System
settings > Mobile networks.
2. Check Enable Always-on mobile data to allow
applications to update data automatically.
IMPORTANT: When you enable this option, more
data traffic will be generated for automatic updates of
applications data. Your phone will also consume more
power.
Getting Data Services When Roaming
1. Press the Home Key > Menu Key > System
settings > Mobile networks.
2. Check Data roaming.
IMPORTANT: Depending on your service provider
and rate plan, data roaming may incur significant
roaming charges.
2021
Change Roaming Mode
1. Press the Home Key > Menu Key > System
settings > Mobile networks.
2. Tap System select to set the CDMA roaming mode.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can
provide Internet access at distances of up to 100
meters, depending on the Wi-Fi router and your
surroundings.
Turning Wi-Fi On and Connecting
to a Wi-Fi Network
1. Press the Home Key > Menu Key > System
settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position to turn
on Wi-Fi.
3. Tap a network name to connect to it.
4. If the network is secured, enter the password and
tap Connect.
NOTE: Your phone automatically connects to
previously used Wi-Fi networks when they are in range.
Getting Notified of Open Networks
1. Press the Home Key > Menu Key > System
settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Press the Menu Key > Advanced.
4. Check Network notification.
When Wi-Fi is on, you receive notifications in the Status
Bar when your phone detects an open Wi-Fi network.
Uncheck the option to turn off notifications.
Adding a Wi-Fi Network
You can add a Wi-Fi network if the network does not
broadcast its name (SSID) or add a Wi-Fi network when
you are out of range.
To connect to a secured network, you first need to get
the security details from the network’s administrator.
1. Press the Home Key > Menu Key > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Tap Add network.
4. Enter the network SSID (name). If necessary, enter
security or other network configuration details.
5. Tap Save.
Forgetting a Wi-Fi Network
You can make your phone forget the details of a Wi-Fi
network that you added—for example, if you don’t
want the phone to connect to it automatically or if it is
a network that you no longer use.
1. Press the Home Key > Menu Key > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Tap the Wi-Fi network name and then tap Forget.
Adjusting Advanced Wi-Fi Settings
1. Press the Home Key > Menu Key > System
settings > Wi-Fi.
2. Press the Menu Key > Advanced to adjust the
following settings.
• Network notification: Get notifications in the
Status Bar when Wi-Fi is on and an open network
is available.
• Keep Wi-Fi on during sleep: Choose whether
or not to keep Wi-Fi on in Sleep mode.
• Avoid no Internet connections: Only use a
Wi-Fi network when the Internet connection is
good.
• MAC address: Check the MAC address.
• IP address: Check the phone’s IP address.
Connecting to Bluetooth
Devices
Bluetooth is a short-range wireless communication
technology. Phones or other devices with Bluetooth
capabilities can exchange information wirelessly within
a distance of about 32 feet (10 meters). The Bluetooth
devices must be paired before the communication is
performed.
Turning Bluetooth On/O
1. Press the Home Key > Menu Key > System
settings > Bluetooth.
2. Slide the Bluetooth switch to the ON or OFF
position.
When Bluetooth is on, the
Status Bar.
icon will appear in the
Connecting to Networks and DevicesConnecting to Networks and Devices
Changing the Device Name
1. Press the Home Key > Menu Key > System
settings > Bluetooth.
2. Slide the Bluetooth switch to the ON position if
Bluetooth is off.
3. Press the Menu Key > Rename phone.
4. Edit the name and tap OK.
Pairing With Another Bluetooth
Device
1. Press the Home Key > Menu Key > System
settings > Bluetooth.
2. Slide the Bluetooth switch to the ON position if
Bluetooth is off.
Your phone automatically scans for and displays the
IDs of all available Bluetooth devices in range. Tap
SEARCH FOR DEVICES if you want to scan again.
3. Tap the device you want to pair with.
4. If necessary, confirm that the Bluetooth passkeys are
the same between the two devices and tap Pair.
Alternately, enter a Bluetooth passkey and tap Pair.
Pairing is successfully completed when the other
device accepts the connection or the same passkey
is entered.
NOTE: The Bluetooth passkey may be fixed for certain
devices, such as headsets and hands-free car kits. You
can try entering 0000 or 1234 (the most common
passkeys) or refer to the documents for that device.
2223
Sending Data via Bluetooth
1. Open the appropriate application and select the file
or item you want to share.
2. Select the option for sharing via Bluetooth. The
method may vary by application and data type.
3. Tap a Bluetooth device the phone has paired with or
wait for it to search for new devices and tap one of
them.
Receiving Data via Bluetooth
1. Turn Bluetooth on before trying to receive data via
Bluetooth.
NOTE: If the phone has not been paired with the
sending device, you may need to tap Bluetooth >
Z750C in Settings to keep the phone detectable
through Bluetooth.
2. Flick down the Status Bar and tap
3. Tap Accept to start receiving the data.
Received files are stored automatically in a dedicated
folder (Bluetooth, for instance). You can access them
with the File Manager app. Received contacts (vCard
files) are automatically imported to your contact list.
.
Connecting to Your
Computer via USB
You can connect your phone to a computer with a USB
cable and transfer music, pictures, and other files in
both directions. Your phone stores these files in internal
storage or on a removable microSDHC card.
Connecting Your Phone to a
Computer via USB
1. Connect your phone to the PC with a USB cable.
2. Press the Home Key > Menu Key > System settings > Connect to PC.
3. Choose one of the following options:
• Media device (MTP): Transfer media files on a
Windows-based PC or with Android File Transfer
on a Mac.
• Camera (PTP): Transfer photos using camera
software and transfer any files to a computer that
doesn’t support MTP.
Connecting with Windows
®
Player
Media
You can sync music with your phone and your computer
installed with Windows Media Player.
1. Connect the phone with your computer via USB and
choose Media device (MTP).
2. Open Windows Media Player and synchronize
music files.
Disconnecting Your Phone From
the Computer
To disconnect the phone from the computer, simply
unplug the USB cable when you’re finished.
Removing the microSDHC Card
From Your Phone
If you need to remove the microSDHC card while the
phone is on, you should unmount it first.
1. Press the Home Key > Menu Key > System settings > Storage.
2. Scroll down and tap Unmount SD card > OK.
3. The
icon appears in the Status Bar and you can
now safely remove the microSDHC card from the
phone.
Erasing the microSDHC Card
1. Press the Home Key > Menu Key > System
settings > Storage.
2. Scroll down the screen and tap Erase SD card >
Erase SD card > Erase everything.
CAUTION! The formatting procedure erases all
the data on the microSDHC card, after which the files
CANNOT be retrieved.
Connecting to Virtual Private
Networks
Virtual private networks (VPNs) allow you to connect
to the resources inside a secured local network. VPNs
are commonly deployed by corporations, schools, and
other institutions to let people access local network
resources when not on campus, or when connected to
a wireless network.
Depending on the type of VPN you are using, you may
Connecting to Networks and Devices
Phone Calls
be required to enter your login credentials or install
security certificates before you can connect to your
VPN. You can get this information from your network
administrator.
Adding a VPN
1. Press the Home Key > Menu Key > System
settings > More > VPN.
2. You may be prompted to set a lock screen (see
Personalizing – Protecting Your Phone With Screen
Locks). If not, tap Add VPN profile and fill in the
information provided by your network administrator.
3. Tap Save.
The VPN is added to the list on the VPN screen.
Connecting to a VPN
1. Press the Home Key > Menu Key > System
settings > More > VPN.
2. Tap the VPN that you want to connect to.
3. When prompted, enter any requested credentials
and then tap Connect.
When you are connected, the VPN connected icon
appears in the Status Bar.
Modifying a VPN
1. Press the Home Key > Menu Key > System
settings > More > VPN.
2. Tap and hold the VPN that you want to modify.
3. Tap Edit profile and edit the VPN settings.
4. Tap Save.
Deleting a VPN
1. Press the Home Key > Menu Key > System
settings > More > VPN.
2. Tap and hold the VPN that you want to delete.
3. Tap Delete profile.
You can place calls from the Phone app, the People
app, or other apps or widgets that display contact
information. Wherever you see a phone number, you
can usually tap it to dial.
Placing and Ending Calls
Placing a Call by Dialing
1. Press the Home Key > .
2. Enter the phone number with the on-screen keypad.
Tap
to delete incorrect digits.
NOTE: As you enter digits, your phone searches
for contacts that match. If you see the number you
want to dial, tap it to place the call immediately
without entering the rest of the number.
3. Tap
TIP: To make an international call, tap and hold the
0 Key to enter the plus (+) symbol. Next, enter the
country code followed by the city/area code and then
the phone number.
Ending a Call
During a call, tap on the screen.
below the keypad to dial.
Answering a Call
When you receive a phone call, drag over to
answer the call.
NOTE: To silence the ringer before answering the
call, press the Volume Up/Down Keys.
Rejecting a Call
When you receive a phone call, drag over to
reject the call.
You can also drag
send a preset text message to the caller.
over to reject the call and
TIP: To edit the text response from within the Phone
app, press the Menu Key > Settings > Quick
responses.
Working With the Call Log
The Call Log is a list of all the calls you’ve placed,
received, or missed. It provides a convenient way to
redial a number, return a call, or add a number to
your Contacts.
To open the call log, press the Home Key > Call Log or tap the
tab in the Phone app.
>
Placing a Call From the Call Log
Answering or Rejecting Calls
When you receive a phone call, the Incoming Call screen
opens, displaying the Caller ID or the information about
the caller that you’ve entered in People. You can answer
or reject the call, or reject it with a text message.
2425
1. Open the Call Log.
2. Tap a number for more information about the call,
or tap
beside it to call back.
NOTE: You can tap All Calls
the screen and select the type of call log you want
to view.
on the bottom of
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.