Zte U.S. Cellular Home Phone Quick Start Manual

1

2

Contents

Getting to Know Your Device ............... 4

Appearance ................................ ................................ ...................... 4

LED Indicator ................................................................................. 5

Device Installation ................................... 6

Before You Begin ............................................................................ 6

Installing the Battery ....................................................................... 6

Installing the Power Adapter ........................................................... 8

Connecting the Device to a Phone .................................................. 8

Turning on Your Device .................................................................. 9

Checking the Wireless Signal .......................................................... 9

Using Your Device ................................. 10

Making Calls ................................................................................. 10

Receiving Calls ............................................................................. 10

Three-Way Calling ........................................................................ 10

Voice Mail ..................................................................................... 11

Call Waiting................................................................................... 11

Call Forwarding ............................................................................ 11

Immediate Call Forwarding .................................................. 12

Busy Call Forwarding ............................................................ 12

No Answer Call Forwarding ................................................. 13

Adjusting Volume .......................................................................... 13

3

TTY Support ................................................................................. 14

Frequently Ask Question ..................... 15

Troubleshooting..................................... 18

Specification ........................................... 19

Safety Notes ............................................ 20

RF Exposure Information .................... 22

FCC Regulations .................................... 23

4

Getting to Know Your Device

Appearance

NOTE:

Service Port is designed for diagnostic purposes only, not for customer
use. Never place a USB-based device into the USB port of the device
under any circumstance. Doing so may damage the device and negate
its warranty.

5

LED Indicator

Key

Icon Name

Status

Condition

Power

Green

ON

Off

No Power

Voicemail

Green

New message

Off

No message

Battery Charge

Green

High

Yellow

Medium

Red

Low

Blink

Charging

Signal Strength

Green

Strong

Yellow

Moderate

Red

No Service

Blink

Roaming

6

Device Installation

Before You Begin

Your device works exclusively with the U.S. Cellular® network and
DOES NOT use your home’s phone wall jacks.
Your device should be located:
 Where you have a strong cellular signal from a cell tower,

typically near a window or outside wall.

 Near an electrical wall outlet.

Installing the Battery

1. Remove the cover from the battery compartment.

7

2. Insert the battery connection cable into the battery port.

3. Place the battery in the battery slot and replace the battery
cover.

NOTES:

 The system will stop charging the battery when the ambient

temperature is outside of the temperature range allowed for
charging (0 °C ~ 55 °C).

 When the power adapter is connected, the battery will

automatically be charged.

 When fully charged, the battery will automatically stop charging.
 Remove the battery if the device will be unused for a long period.