ZTE Peel User Manual
Welcome!
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
_
What’s in the Box
_
Get Your Device Ready
_
Install Your Device _
Get started
_
All you need to know to get going.
Sprint is committed to developing technologies that give you the
ability to get what you want when you want it, faster than ever before.
This booklet introduces you to the basics of getting started with
Sprint and your new ZTE PEEL. Because there’s less waiting, and more
doing, on the Now Network.™
©2010 Sprint. SPRINT and the logo are trademarks of Sprint. ZTE and PEEL are registered trademarks of ZTE USA. iPod and iPod touch
are registered trademarks of Apple, Inc. Other marks are property of their respective owners.
Charger
ZTE PEEL
Get Started Guide (this guide),
Important Information Booklet,
Terms and Conditions of Service
Headset adapter
Charge the Battery
1. Plug the charger into the device’s microUSB
connector on the left side of the device near
the bottom.
2. Plug the charger into an electrical outlet.
Turn on Your Device
Press and hold the the Power On/Off button for
•
three to four seconds. The LEDs will fl ash, and
when only the center LED is fl ashing, you are
connected to the Sprint network.
Note: While your device is powering on, the LEDs
will fl ash several times, indicating your battery’s
charge level.
Low battery
Fully-charged battery
Battery needs recharging
Mount Your Apple iPod touch® to the Device
1. Holding the PEEL with the Sprint logo at the
bottom, slide your iPod touch into the PEEL
until it seats at the bottom.
2. Gently press down on both sides of your
iPod touch at the top until it clicks into place.
Connect Stereo Headphones to
Your iPod touch
• Insert the headset adaptor into the opening in the
bottom right of the PEEL and press until the plug
securely connects to your iPod touch’s
headphones port. Then connect your
headphones to free end of the headset adapter.
Activate and Use Your Device _
Manage Your Account
_
Helpful Sprint Information
_
Resources
_
Activate Your Device
• If you purchased your PEEL at a Sprint Store or an authorized Sprint retailer, it
should be activated and ready to use.
• If you received your PEEL in the mail, it should activate automatically when you
fi rst turn it on.
Make a Wi-Fi Connection
1. Turn on your iPod touch and unlock the screen.
2. Press the Home Button > Settings > Wi-Fi, and make sure the slider is set to ON.
3. Select “SprintPeelXXX” from the list of available networks. (Note: “XXX” will be the
last three characters of your device‘s MAC ID, a unique identifi er printed on the
sticker on the inside of your device.)
4. Press the Home Button > Safari, and enter a URL or select a bookmarked website
to confi rm that your iPod touch is connected to the Internet.
80900975MT
Change Your Network Name (SSID) and Password
1. In your Safari browser, type http://192.168.2.1 into the address fi eld, and touch Go.
2. If you have used the browser interface before, skip to step 4.
3. Touch Admin, enter “admin” for both the Username and Password, and
touch Log In.
4. Touch Admin > WiFi Settings.
5. Enter a new name for your device (for example, “My PEEL”) in the SSID text box and a
new password in the Password text box.
6. Leave all other settings as is and touch Apply.
Manage Other Device Settings
1. Follow steps 1 – 3 in “Change Your Network Name (SSID) and Password.”
2. Touch Admin and select a setting to change.
For more information about Admin settings, see the online User Guide at
sprint.com/support.
Online: www.sprint.com
• make a payment, see your bills, enroll in online billing
• check usage and account balance
• see or modify the details of your Sprint service plan
• get detailed instructions and download content
From Any Phone
Sprint Customer Service: Dial 1-888-211-4727
•
Business Customer Service: Dial 1-800-927-2199
•
Total Equipment Protection
The protection you need so you can be worry free
Should anything happen to your device, you’ll have a worry-free way to
ensure that you get connected again soon.
• Coverage includes:
Loss, theft, routine maintenance, physical or liquid damage, mechanical or
electrical problems, or failure from normal wear and tear.
• For more information:
See the Total Equipment Protection brochure available at any participating retail
location or go to sprint.com/tep for more details. To enroll within 30 days of
activation, call 1-800-584-3666.
Total Equipment Protection is a service provided by Asurion Protection Services, LLC, Continental Casualty Company’s (a CNA company)
licensed agent for the customers of Sprint.
For Your Device
• This Get Started guide to get you up and running.
• User Guide – View the comprehensive User Guide for the Peel online
at sprint.com/support.
• Browser Interface – With your iPod touch connected, launch Safari
and then type http://192.168.2.1 into the address window, and touch
Internet to go directly to sprint.com; Admin to change device settings;
or Help to access online help.
• Web – Go to sprint.com/support to access troubleshooting and
other resources.
Loading...