No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print
errors or update specifications in this guide without prior notice.
This manual has been designed with the utmost care to ensure
the accuracy of its content. However, all statements, information
and recommendations contained therein do not constitute a
warranty of any kind, either expressed or implied. Please refer to
For Your Safety to be sure to use your device properly and
safely.
We offer self-service for our smart terminal device users. Please
visit the ZTE official website (at www.ztedevice.com) for more
information on self-service and supported product models.
Information on the website takes precedence.
2
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorized modifications of the software.
Images and screenshots used in this manual may differ from the
actual product. Content in this manual may differ from the actual
product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth® trademark and logos are owned by the Bluetooth
SIG, Inc. and any use of such trademarks by ZTE Corporation is
under license.
Qualcomm® Snapdragon™ processors are products of
Qualcomm Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm
Incorporated, registered in the United States and other countries.
Used with permission.
DLP is the trademark of Texas Instruments.
microSDHC Logo is a trademark of SD-3C, LLC.
3
Manufactured under license from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D symbol are trademarks of Dolby
Laboratories.
Other trademarks and trade names are the property of their
respective owners.
Version No.: R1.0
Edition Time: May 7, 2015
4
Contents
Getting Started ....................................................... 10
Getting to Know Your MF97G ............................................ 10
Installing the microSDHC™ Card (Not Included) ............... 14
Charging the Battery .......................................................... 15
Powering On/Off Your MF97G ........................................... 17
Restarting Your MF97G ..................................................... 17
Waking Up Your MF97G .................................................... 17
Setting Up for the First Time .............................................. 18
Turning On/Off the Projector .............................................. 18
Adjusting the Projection ..................................................... 20
Using the Touch Screen ..................................................... 21
Getting to Know the Home Screen .................................... 24
Do not look directly into the projection lens or point the lens
toward people or animals’ eyes when the projector is on as this
may cause injury to the eyes.
Focus Sensor
Analyze the clarity of the projected image in order for the
projector to adjust its focus automatically.
Back Key
Touch to go to the previous screen.
Home Key
Touch to return to the HOME tab of the home screen.
Touch and hold to open the Dolphin browser or the Google
app.
Menu Key
Touch to get options for the current screen.
Touch and hold to see recently used apps.
Volume Key (Volume Up/Down)
Press or hold to turn the volume up or down.
12
Power Key
Press and hold to enable or disable airplane mode, power
on/off or restart your MF97G.
Press to turn off or on the screen display.
Press twice quickly when the projector is turned on to adjust
its focus automatically.
Main Microphone / Auxiliary Microphone
Transmit your voice. The auxiliary microphone is useful for
canceling ambient noise.
Ventilation Port
Exhaust hot air when the projector is on.
WARNING!
Do not place anything near the ventilation port as this may cause
internal heat buildup. Do not place your hand near the ventilation
port as this may cause injury.
Tripod Receptacle
Connect a tripod (not included in the packaging).
13
Installing the microSDHC™ Card (Not
Included)
A microSDHC card can be installed or removed while MF97G is
turned on. You need to unmount the microSDHC card before
removing it. See Remove the microSDHC Card From Your
MF97G.
1. Turn your MF97G upside down. Insert the tip of the tray eject
tool into the hole on the microSDHC card tray and take the
tray out of the slot.
2. Place the microSDHC card on the tray as shown and carefully
install the tray back.
14
NOTE:
Some applications may require a microSDHC card to work
properly if it stores certain data on it. Therefore, it is
recommended that you keep a microSDHC card installed and
not remove or replace it unnecessarily.
Charging the Battery
You should fully charge the battery before using MF97G. Out of
the box the battery should have enough power for MF97G to turn
on.
WARNING!
Use only ZTE-approved chargers and cables. The use of
unauthorized accessories may cause damage.
15
CAUTION:
Do not try to remove or change the built-in rechargeable battery
in your MF97G by yourself. By doing so will violate the warranty
policy from ZTE. Contact customer service for support.
1. Plug the AC adapter into the power socket on your MF97G
and then put the plug into an electrical outlet.
2. Disconnect the adapter when the battery is fully charged.
NOTE:
If the battery is extremely low, you may not be able to power on
MF97G even when it is charging. Allow MF97G to charge longer
and try again. Contact the customer service if you still cannot
power on MF97G after prolonged charging.
16
Powering On/Off Your MF97G
Ensure that the battery is charged.
Press and hold the Power Key to turn on your MF97G.
To power it off, press and hold the Power Key to open the
options menu. Touch Power off and then touch OK.
Restarting Your MF97G
If the screen freezes or takes too long to respond, try pressing
and holding the Power Key for about 10 seconds to restart
MF97G.
Waking Up Your MF97G
Your MF97G automatically goes into sleep mode when it is not in
use for certain time. The touch screen is turned off to save power
and the keys are locked to prevent accidental operations.
You can wake up your MF97G by following the instruction as
below.
1. Press the Power Key to turn the touch screen on.
2. Touch and hold any area of the screen to unlock MF97G.
NOTE:
If you have set an unlock pattern, a PIN or a password for your
MF97G (see Protecting Your MF97G With Screen Locks), you’ll
need to draw the pattern, or enter the PIN/password to unlock
your MF97G.
17
Setting Up for the First Time
When you first power on your MF97G after you purchase it or
reset it to factory settings (see Backup and Reset), you need to
do some settings before using it.
Flick the language field to select the language and touch Start.
Then follow the prompts to set up Wi-Fi, data and time, Google
account, Google location and other options.
Turning On/Off the Projector
You can use the projector embedded in your MF97G to project
the display onto large surfaces.
WARNING!
Do not look directly into the projection lens or point the lens
toward people or animals’ eyes when the projector is on as this
may cause injury to the eyes.
18
There are several ways that you can turn on or off the projector.
When your MF97G’s screen is turned on, swipe up or down
using THREE fingers on the screen to turn on or off the
projector.
Drag the status bar down from the top of the screen and
touch Projector below Control Switch.
From the HOME tab of the home screen, touch on the
Projector widget.
From the SETTINGS tab of the home screen, touch
Projector > Control and then touch the switch next to
Projector in the Projector settings screen.
NOTE:
For best results, project onto a non-reflective white flat display
19
surface at a 90° angle to MF97G’s touch screen. The projection
distance of MF97G is about 3 to 12 feet.
Adjusting the Projection
When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness and projection color.
To adjust projection focus:
1. Touch the Home Key > SETTINGS tab > Projector > Image.
2. In the Focus section, turn on automatic focus or touch “+” and
“-” to make manual adjustment.
NOTE:
You can also press the Power Key twice quickly to adjust
projection focus automatically.
To adjust keystone distortion:
You can adjust keystone distortion to correct image during a tilted
projection.
1. Touch the Home Key > SETTINGS tab > Projector >
Image.
2. In the Keystone section, turn on automatic adjustment or
touch “+” and “-” to make manual adjustment.
To adjust projection brightness:
1. Touch the Home Key > SETTINGS tab > Projector >
Image.
20
2. In the Brightness section, select the brightness level.
To adjust projection color:
1. Touch the Home Key > SETTINGS tab > Projector >
Image.
2. In the Color correction section, select a color effect you like.
Using the Touch Screen
Your MF97G’s touch screen enables you to control actions
through a variety of touch gestures.
Touch
When you want to type using the onscreen keyboard, or
select items on the screen such as onscreen buttons,
applications and settings icons, simply touch them with your
finger.
Touch and Hold
To open available options for an item (e.g. a link in a web
page), simply touch and hold the item.
21
Swipe or Slide
To swipe or slide means to quickly drag your finger vertically
or horizontally across the screen.
Drag
To drag, press and hold your finger with some pressure
before you start to move your finger. While dragging, do not
release your finger until you have reached the target position.
22
Pinch
In some apps (such as Maps, web browser, and Gallery), you
can zoom in and out by placing two fingers on the screen at
once and pinching them together (to zoom out) or spreading
them apart (to zoom in).
Rotate the screen
For some screens, you can automatically change the screen
orientation from landscape to portrait by turning MF97G
sideways.
23
Status bar
Tabs
Application
shortcut
Folder
Projector
Widget
NOTE:
The Auto-rotate screen check box needs to be selected for
the screen orientation to automatically change. Touch the
Home Key > SETTINGS tab > System > Device > Display >
Auto-rotate screen.
You can also access the screen rotation control by sliding
down the status bar and touching Auto Rotate.
Getting to Know the Home Screen
The home screen is the starting point for your MF97G’s
applications, functions, and menus. You can customize your
home screen by adding tabs, folders, or application shortcuts you
need, or remove them as you like.
24
Navigate the Home Screen
Your home screen comes with a series of tabs.
Touch a tab to access the items in it.
Touch the APPS tab to find all your applications.
Touch other tabs to find application shortcuts, folders and
widgets.
With widgets, you can manage some important functions of
your MF97G right from the home screen.
Personalize the Home Screen
To add a tab:
Touch to add a new tab in the home screen.
To edit a tab:
Touch and hold the tab and then touch to delete the tab and
all items in it, or touch the tab name to enter a new tab name.
NOTE:
Some tabs, such as the APPS tab and the HOME tab, are
pre-configured and cannot be edited.
To add an application shortcut:
1. Touch and hold an application icon in the APPS tab or any
shortcut in any other tab.
2. Drag the item to the name of the tab that you want to put the
item in. The screen will display the content in that tab.
25
3. Drag the item to an empty spot in the tab and release your
finger.
To remove an application shortcut:
1. Touch and hold an application icon in any tab other than the
APPS tab.
2. Drag the icon to (Remove) at the bottom and release
your finger.
To organize shortcuts with folders:
1. Touch and hold an application icon in any tab other than the
APPS tab.
2. Drag the icon to (Folder) at the bottom and release your
finger. A new folder is created and the icon is moved into the
folder.
3. To add more shortcuts into the folder, touch and hold them
and drag them to the folder and release them.
NOTE:
To remove a shortcut from a folder, touch the folder to display its
content, and then touch and hold the shortcut and release it after
dragging it out of the folder.
To rename a folder:
1. Touch a folder to open it.
2. Touch twice the folder name displayed above the icons in the
folder.
26
3. Enter a new name and touch Done or touch any area outside
the folder to save the name.
To uninstall an application:
1. Touch and hold an application icon in the APPS tab of the
home screen.
2. Touch on the application you want to uninstall.
3. Touch OK.
NOTE:
Not all applications can be uninstalled.
27
Personalizing
Changing the System Language
1. Touch the Home Key > SETTINGS tab > System > Local >
Language & input > Language.
2. Select the language you need.
Setting the Date and Time
1. Touch the Home Key > SETTINGS tab > System > Local >
Date & time.
2. Set the date, time, time zone, and date/time format.
To adjust the date and time automatically, check
Automatic date & time.
To adjust the date and time manually, uncheck
Automatic date & time and touch Set date / Set time to
change the date and time.
To adjust the time zone, touch Select time zone to set
the correct time zone.
To adjust the format of time and date, touch Use 24-hour
format or Choose date format.
28
Changing Notification Sound
You can customize the default notification sound.
1. Touch the Home Key > SETTINGS tab > System > Device > Sound.
2. Touch Default notification.
3. Select the sound you want to use and touch OK.
Turning On/Off Other System Sounds
1. Touch the Home Key > SETTINGS tab > System >
Device > Sound.
2. Check or uncheck Touch sounds, Screen lock sounds, or
Vibrate on touch.
Adjusting Volume
1. Touch the Home Key > SETTINGS tab > System >
Device > Sound > Volumes.
2. Drag the sliders to adjust the volume for each type of audio.
3. Touch OK to save.
Switching to Silent Mode
You can set your MF97G to silent mode by using one of the
following methods.
29
Touch the Home Key > SETTINGS tab > System >
Device > Sound > Sound mode and select Mute.
Keep pressing the Volume Down Key when no media
application is active. When the icon appears on the status
bar, MF97G is in silent mode.
Changing Screen Brightness
1. Touch the Home Key > SETTINGS tab > System >
Device > Display > Brightness.
2. Drag the slider to adjust the screen brightness.
Applying New Wallpapers
You can set the wallpaper for the lock screen.
1. Touch the Home Key > SETTINGS tab > System > Device > Display > Wallpaper.
2. Select a wallpaper source from Gallery or Wallpapers
and choose the image you want to use as the wallpaper.
Some cropping may be needed for Gallery images.
Protecting Your MF97G With Screen
Locks
You can protect your MF97G by creating a screen lock. When it
is enabled, you need to touch and hold on the screen, draw a
pattern or enter a numeric PIN or password to unlock MF97G’s
screen and keys.
30
Loading...
+ 96 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.