Zhone Technologies HP-160, HP-150 User Manual

✓ 24-Port VDSL2 up to

Profile 30a

✓ Multiple HDTV Channel

Support

✓ Hardened for Outside

Plant Deployment

VDSL2 High Performance IP-DSLAM Family

Bitstorm-HP-160, Bitstorm-HP-150

ITU-T G.993.2 Standards based 100/100Mbps VDSL2
IP-DSLAM

✓ ADSL2+ Fallback Support
✓ 2 SFP + 2 Built-In GE

Uplink Ports

✓ VLAN/Bridge Forwarding

with Quality of Service
and Security features

✓ Stacking support with

Inband Management

Bitstorm-HP is a 24-port VDSL2 IP-DSLAM family, featuring high
performance and hardened design with efficient power and space
considerations. Designed as a 1U high product, Bitstorm-HP is ideal for
deployment in space constrained indoor MDU or, external cabinet locations
taking advantage of short last mile loop for ideal VDSL2 rate/reach
performance. Bitstorm-HP-160 uses latest VDSL2 silicon to support all 8
VDSL2 profiles up to Profile 30a and delivers 100/100Mbps Up/Down
line-rate when paired with a Zhone VDSL2 CPE (6652-A2). Bitstorm-HP-150
supports up to Profile 17a and delivers 100Mbps Down, 50Mbps Up
bandwidth. Both Bitstorm HP-160 and HP-150 fully interoprtate with Zhone
VDSL2 CPE 6652-A2 (30a, Bridge/Router) and 6652-A1 (17a, Smart Bridge).
Bitstorm-HP IP-DSLAMs also feature ADSL2+ fallback when connecting to a
ADSL2+ CPE thus providing easy migration for users running legacy
services while providing expanded revenue opportunities for operator's
deploying new high-speed services.

Bitstorm-HP delivers line-rate performance and supports multi-play services
implemented on powerful Network Processor. Bitstorm-HP-160 is architected
with distinct control and data paths which allow high bit-rate services while
supporting advanced L2/L3 features such as - DHCP (Option-82), IGMP
Snooping/Proxy, IP/ARP Spoofing, Forced MAC Forwarding, QoS and
Security/Filtering in either Bridged or, VLAN Switched operating modes.

Bitstorm-HP features an intuitive Web Graphical Interface for device
configuration and management. It also supports complete set of xDSL MIBs
for SNMP based management.

Bitstorm-HP is also available with built-in splitters (POTS, ISDN) and power
(DC, AC) options.

VDSL2 High Performance IP-DSLAM Family

IP

/ Data

Network

Bitstorm-HP

VDSL2 IP-DSLAM

Main

Distribution

Frame

Multi Dwelling
Unit (MDU)

Multiple
HDTV / SDTV

Data
10 / 100 Mbps

Voic e

VDSL2

100 / 100 Mbps

6652-A2-302
VDSL2 Modem

Bitstorm-HP is ideally suited for deployment in Multi Dwelling Units

and delivery of bandwidth intensive services such as HDTV, Video

Conferencing, Interactive Gaming and symmetric business E-Line

services. Bitstorm-HP supports dual Gigabit Ethernet uplinks which

can be aggregated using standards based line aggregation protocol

(LACP 802.3ad). This allows deep-fiber deployment and interface with

Metro switches.

Operators providing business services can utilize rich traffic

management and security features to provide guaranteed services and

prevent malicious user behavior. Some of the supported features are: -

Prevent traffic flooding between line bridge ports - Configurable

rate-limit per bridge port per VLAN - IGMP broadcast limit per line

port - MAC address spoofing - IP/ARP spoofing - IP-Allow filter based

on DHCP snooping - Forced destination MAC address forwarding