Zhone Technologies 6411-A1-xxx User Manual

✓ ADSL2+ Annex M support

data rates up to 3MB

✓ Multiple PVC up to 8

support

✓ Static IP, Dynamic RIP

routing support

✓ Network Address

Translation (NAT)

ADSL2+ Modem (Conexant)

6411-A1-xxx

ADSL2+ Modem with 1 Ethernet and 1 USB,
Conexant chipset

✓ Universal Plug and Play

Support

✓ TR-069 Remote

Management Support

The Zhone 6411-A1 ADSL 2/2+ Ethernet USB Router uses Conexant
Viking II-Plus Chipset solution that fully complies with ANSI T1.413
Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard.
Zhone 6411-A1 also provides higher data transmission rates with
ADSL2, ADSL2+, and Extended Reach-ADSL support. This next
generation ADSL will provide up to 12Mbps speed with an additional
600 feet reach for ADSL2; and up to 27Mbps speed with distance up to
5,000 feet for ADSL2+ Support. In addition, with ADSL2+ Annex M
support, upstream rate will be improved to up to 3Mbps.

Targeted at the residential users, it is for both single user using Bridge
mode with host based PPPoE Client and multi-users utilizing the
DSL309EU’s inbuilt PPPoE/A, IP routing, NAT functionality to share
the ADSL link.

It comes with the Packet Filtering firewall and DMZ support for a full
security options against malicious hackers. With Universal Plug and
Play support, home networking becomes a breeze for everyone in the
family. Multi Port Range/Popular Application Forwarding makes it
even easier to select which application you want your network to
allow while ensuring your security at the same time.

Technical Specifications

Dimensions

■ Dimension : 105 (L) x 105 (W) x 30 (H) mm

Weight

■ Weight : Approx. 250g

Power

■ 12VDC, 0.8Amp

Interfaces

■ DSL Line: RJ11

■ Ethernet: 10/100BaseT

■ USB 1.1

ADSL2+ Modem (Conexant)

Standards Support

■ ATM Support

- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back

- Support for multiple PVC's up to 16

- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)

■ Routing/Bridge Support

- Transparent Bridge Support

- DHCP Server

- DNS Relay Agent

- Dynamic DNS Support

- DMZ support

- Static Routing

- RIPv1 and RIPv2

- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)

- IGMP v1/v2

- SNTP support

- IP Sec and PPTP/L2TP VPN pass through
support

- QOS (802.1p) support

- Port fowarding

- Port to PVC mapping

■ PPP Support

- PAP/CHAP authentication

- PPPoA

- PPPoE

■ Security

- NAT for Basic Firewall support

- Ingress and Egress Packet Filtering

- Stateful Packet Inspection

- Protection against Denial of Service attacks

■ DELT support

Protocol Support

■ ANSI T1.413 (Full Rate ADSL)

■ ITU G.992.1 (DMT)

■ ITU G.992.2 (G.lite)

■ ITU G.992.3 (ADSL2)

■ ITU G.992.5 (ADSL2+)

■ ITU G.994.1 (G.hs)

■ ITU G.997.1

■ Annex L

Management

■ Web-based Configuration GUI

■ CLI

■ Telnet Remote Management

■ SNMP Support

■ FTP/TFTP firmware upgrade and configuration

backup/restore

■ Syslog Support

■ TR-069

Bandwidth/Distance

■ Downstream Speeds up to 24 Mbps using

ADSL2+ (2.2 Mbps with ReachDSL)

■ Upstream speeds up to 2 Mbps with ADSL2+

(2.2 Mpbs with ReachDSL)

Regulatory Compliance

■ FCC Part 15, Part 68

■ CE

Operating Requirements

■ Operating Temperature: 32° F to 104° F (0° C to

40° C)

■ Storage Temperature: –4° F to 149° F (–20° C to

65° C)

■ Humidity: 5% to 95%, non-condensing

Ordering Information

6411-A1-200 ADSL2+ BRID/RTR, ANNEX A, NA

6411-A1-300 ADSL2+ BRID/RTR, ANNEX A, UK

6411-A1-302 ADSL2+ BRID/RTR, ANNEX A, EURO

6411-A1-304 ADSL2+ BRID/RTR, ANNEX A, INDIA

6411-A1-330 ADSL2+ BRID/RTR, ANNEX B, UK

6411-A1-332 ADSL2+ BRID/RTR, ANNEX B, EURO

2008/05/19 10:58:55