Zhone Technologies 6381-A3-xxx User Manual
✓ Revolutionary
combination of standards
based ADSL and ReachDSL
on a single platform
✓ DELT - Dual Ended Loop
Testing
✓ Automatically selects
technology with best
performance - ADSL,
ADSL2, ADSL2+, or
ReachDSL 2.2
ADSL2+/ReachDSL Single Port Modem
6381-A3-xxx
ADSL2+/ReachDSL Single Port Bridge/Router
with USB
With Zhone's innovative, easy to use ADSL2+/R CPE family, service
providers can provide ADSL2+ service and ReachDSL service in the
same unit, ensuring coverage to the entire subscriber base.
✓ Speeds beyond 24 Mbps
using ADSL2+
✓ Compatible with all
DSLAMs providing
standard ADSL, ADSL2,
and ADSL2+
✓ Integrated telephone
filter
✓ Bridge and router
configurations
The Zhone 6300 enhanced CPE are easily user-installed. The embedded
web-based user interface is designed to simplify ADSL deployment. All
products provide an Ethernet connection that is auto-sensing,
eliminating the worry about connection cable type (straight-through vs
crossover). All units include a built in POTS filter that eliminates the
expense of an external filter as well as reduces installation errors.
The 6300 enhanced CPE all default to a simple bridge. This and other
default settings make for a quick and easy installation that doesn't
require any configuration.
When operating in router mode, these gateways support DHCP
Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port
forwarding, static routing, and ping initiation. For security, firewall
functions including PAP/CHAP and Packet Filtering are supported.
In addition, all of the CPE that make up the 6300 family support DELT,
or Dual End Loop Test. Because DELT is a dual-ended test, it requires
equipment that supports the DELT feature at both ends of the copper
loop.
DELT is primarily used for reactive tests on a loop after a modem has
been deployed—either to help troubleshoot a line or to capture a
baseline of loop characteristics at the time of installation.
Technical Specifications
Dimensions
■ 1.2" H x 6" W x 4.4" D (3.05cm H x 15.24cm W
x 11.8cm D)
Weight
■ 1.5lbs (shipping weight)
Power
■ 100 VAC, 50 Hz
■ 110 VAC, 60 Hz
■ 220VAC, 50/60 Hz
Interfaces
■ DSL Line: RJ11
■ Phone: RJ11 (with integrated phone filter)
■ Ethernet: 10/100Base T
■ USB 1.1
ADSL2+/ReachDSL Single Port Modem
Standards Support
■ ATM:
- RFC 1483/2684 Multiprotocol Encapsulation
over ATM
- Up to 8 PVCs, UBR, CBR, VBR
- OAM F5, F4 Loopbacks
■ PPP
- RFC 2364 PPP over ATM
- RFC 2516 PPP over Ethernet
- PAP/CHAP
■ Routing/Bridge
- IPv4, TCP, UDP, ICMP, ARP, RARP, proxy-ARP
- RIPv1, RIPv2
- Static Routing
- DHCP Server/Client/Relay
- DNS Proxy
- UPNP
- IGMP v1,v2 Snooping and Proxy
- IEE 802.1d transparent bridging
■ Security
- NAPT
- Stateful Inspection Firewall
- PPP with PAP/CHAP
Protocol Support
■ ANSI T1.413 (Full Rate ADSL)
■ ITU G.992.1 (DMT)
■ ITU G.992.2 (G.lite)
■ ITU G.992.3 (ADSL2)
■ ITU G.992.5 (ADSL2+)
■ ITU G.994.1 (G.hs)
■ ITU G.997.1
■ Zhone ReachDSL 2.2
Management
■ Web based User Interface
■ Firmware Upgradeable via HTTP
■ Telnet Server
■ TFTP Server and Client
■ SNMP
Bandwidth/Distance
■ Downstream Speeds up to 24 Mbps using
ADSL2+ (2.2 Mbps with ReachDSL)
■ Upstream speeds up to 2 Mbps with ADSL2+ (1
Mpbs with ReachDSL)
Regulatory Compliance
■ FCC Part 68
■ FCC Part 15
■ CE
■ UL
■ TUV
■ ReachDSL 2.2 Spectral Compliance:
- ANSI T1.417
- ANSI T1.413
- UK ANFP
- ETSI TR101 830-1
- Approved for all loops in Japan by the TTC
Operating Requirements
■ Temperature: 32F to 104F (0C to 40C)
■ Non-operating temperature: -4F to 149F (-20C
to 65C)
■ Humidity: 5% to 95%, non-condensing
Ordering Information
6381-A3-200 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, N.A.
6381-A3-210 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, N.A., FCC Part 68 Approved
6381-A3-300 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, U.K.
6381-A3-302 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, EURO
6381-A3-304 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, India
6381-A3-600 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, Japan
2007/06/19 11:41:05
Loading...