Zhone Technologies 6211-I3-xxx User Manual

✓ Auto-connect feature will

automatically detect the
first usable PVC and
automatically detect
PPPoE, PPPoA, and Bridge
Protocol(with DHCP Server
available)

ADSL2+ Single Port Modem

6211-I3-xxx

ADSL2+ Single Port Bridge/Router with USB

✓ Configurable as either a

Bridge or Router

✓ Filter traffic based on

Destination or Source IP
Address and MAC
Addresses

✓ Traffic Class Rules based

on Protocol, Source IP,
Source Port, Destination
IP, Destination Port,

802.1p

✓ Single Click DSL test - Tests

Ethernet connection and
ADSL Synchronization
along with ATM OAM F5
segment pings and
end-to-end pings.

The 6200 ADSL2+ family of endpoints deliver the required performance
for multimedia applications at very competitive price points. The 6200
ADSL2+ endpoints, in compact form factor, have been successfully used
for residential, business, in-building deployments such as hotel/motel,
temporary housing, and dormitory-campus installations for high-speed
internet access (HSIA) and video-on-demand services.

The Zhone 6200 ADSL2+ endpoints are easily user-installed. The
embedded web-based user interface is designed to simplify ADSL
deployment. All products provide an Ethernet connection that is
auto-sensing, eliminating the worry about connection cable type
(straight-through vs crossover).

DELT or Dual End Loop Test, is a feature that is present the 6200 Family
of ADSL2+ CPEs. DELT is primarily used for reactive tests on a loop after
a modem has been deployed—either to help troubleshoot a line or to
capture a baseline of loop characteristics at the time of installation.
Because DELT is a dual-ended test, it requires equipment that supports
the DELT feature at both ends of the copper loop. While this prevents

✓ Configured through

easy-to-use web interface

✓ DELT - Integrated Loop

Testing for Line
troubleshooting

DELT from being used on loops where no CPE has yet been deployed,
DELT in turn offers a deeper set of loop tests, and can provide very
valuable information on the condition of a copper loop.

Default settings make for a quick and easy installation that doesn't
require any configuration.

The modem, when operating in router mode, support DHCP
Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port
forwarding, and static routing. For security, firewall functions including
PAP/CHAP authentication and IP filtering are supported.

Technical Specifications

Dimensions

■ 1.2"(3.0cm) high x 6"(15.2cm) wide x

4.4"(11.8cm) deep

Weight

■ 1.5lbs (0.7kg)

Power

■ 100 VAC, 50Hz

■ 110 VAC, 60Hz

■ 220 VAC, 50/60Hz

Interfaces

■ DSL Line: RJ11

■ Ethernet: 10/100BaseT

■ USB 1.1

■ Integrated Phone Filter

ADSL2+ Single Port Modem

Standards Support

■ ATM Support

- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back

- Support for 8 PVC's

- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)

■ Routing/Bridge Support

- Transparent Bridge Support

- DHCP Server/Relay/Client

- DNS Relay Agent

- Dynamic DNS Support

- DMZ support

- Static Routing

- RIPv1 and RIPv2

- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)

■ PPP Support

- PAP/CHAP authentication

- PPPoA

- PPPoE

■ Security

- NAT for Basic Firewall support

- Ingress and Egress Packet Filtering

- Parental Control

- MAC Filtering

- Stateful Packet Inspection

■ DELT support

■ TR-069 Support

■ SNMP Support

Protocol Support

■ ANSI T1.413 (Full Rate ADSL)

■ ITU G.992.1 (DMT)

■ ITU G.992.2 (G.lite)

■ ITU G.992.3 (ADSL2)

■ ITU G.992.5 (ADSL2+)

■ ITU G.994.1 (G.hs)

■ ITU G.997.1

■ Annex L

■ Annex M

Management

■ Web-based Configuration GUI

■ CLI

■ Telnet Remote Management

■ FTP/TFTP firmware upgrade and configuration

backup/restore

■ Syslog Support

■ TR-069 Support

Regulatory Compliance

■ FCC Part 15, Part 68

■ CE

■ UL

■ TUV

■ RoHS compliant

Operating Requirements

■ Operating Temperature: 32F to 104F (0C to

40C)

■ Storage Temperature: -4F to 149F (-20C to 65C)

■ Humidity: 5% to 95%, non-condensing

Ordering Information

6211-I3-200 ADSL2+ CPE Router (Broadcom), 10/100BaseT, N.A.

6211-I3-300 ADSL2+ CPE Router (Broadcom), 10/100BaseT, U.K.

6211-I3-302 ADSL2+ CPE Router (Broadcom), 10/100BaseT, EURO

6211-I3-600 ADSL2+ CPE Router (Broadcom), 10/100BAseT, Japan, (VCCI Compliant)

2008/05/08 10:39:00