Zhone Technologies 6211, 6210 User Manual

6210 Bridge and 6211 Bridge/Router
Quick Installation Instructions

Document Number 6210-A2-ZZ13-10

December 2005

Connect the LINE

1

port of the modem
to your DSL line

LINE LAN POWERPHONE USB

RESET

DEFAULT

04-17517

using the
supplied
phone
cord.

Connect the POWER

OR

4

receptacle to the
power supply and plug

2

Connect the TELEPHONE
port of the modem to
your telephone
using the cord
that came with
your telephone.

3

Connect either:

The LAN port of the modem to a

10/100BaseT Ethernet network
interface card on your PC, or to

the power supply into
a wall outlet.

hub or switch in your network. An
Ethernet cable is supplied with your
modem.

or

The USB port of the modem to a

free USB port on your PC.

If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your
computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard.

See the user’s guide on the CD for important safety instructions and more information.

*6210-A2-ZZ13-10*

Copyright © 2005 Zhone Technologies, Inc. All rights reserved.

*6210-A2-ZZ13-10*