ZETTLER AZ699-1C-5DE, AZ699-1C-48DEA, AZ699-1C-48DE, AZ699-1C-24DEA, AZ699-1C-5DEA Datasheet
...
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 20 million operations
Electrical 1 X 10
5
at 6 A, 30 VDC or 250 VAC
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1000 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms contact to coil
6000 V surge, contact to coil
Insulation 100 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (158°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester 94V-0
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 260°C (500°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 6 grams
CONTACTS
Arrangement SPST (1 Form A)
SPDT (1 Form C)
Ratings Resistive load:
Max. switched power: 150 W or 1500 VA
Max. switched current: 6 A
Max. switched voltage:150* VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material Options:
AgSnO2 (AgCdO)
AgSnO2 with gold plating
Resistance < 100 milliohms initially (AgSnO
2, 24 V method)
< 30 milliohms initially (AgSnO
2, gold plated)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Minimum permissible contact load:
AgSnO
2 contact: 500 mA at 12 VDC
AgSnO
2 contact with gold plating: uW
4. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage 83 mW
(typical)
Max. Continuous 1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
AZ699
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
13/8/01
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.22 square inch
of PCB area
• Thin vertical profile only 0.196" wide
• 6 Amp switching capability
• High sensitivity, 83 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils to 48 VDC
• Epoxy sealed for automatic wave soldering
and cleaning
• Isolation spacing greater than 8 mm
RELAY ORDERING DATA
COIL SPECIFICATIONS–Vertical Mount ORDER NUMBER*
Nominal Coil Max. Continuous Coil Resistance Must Operate AgSnO
2 AgSnO2 with Gold
VDC VDC ± 10% VDC Contact Plated Contact
5 13 119 3.5 AZ699–1C–5DE AZ699–1C–5DEA
12 32 848 8.4 AZ699–1C–12DE AZ699–1C–12DEA
24 64 3390 16.8 AZ699–1C–24DE AZ699–1C–24DEA
48 110 10600 32.0 AZ699–1C–48DE AZ699–1C–48DEA
*Substitute “1A” for “1C” to indicate 1 Form A contacts. Add suffix “H” for horizontal mounting.
AZ699
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
13/8/01
[0.45]
2X .018
[1.0]
3X .039
[0.45]
5X .018
[1.9]
.075
3X ø.051
[ø1.3]
.075
[1.9]
.466
.197
[5.0]
.197
[11.34]
.148
2X ø.039
[ø1.0]
[3.75]
[5.0]
[15.3]
.602
[0.45]
5X .018
[1.2]
.047
[5.0]
.197
[1.0]
3X .039
[0.5]
.020
[3.5]
5X .138
[15.0]
.591
[28.0]
1.102
[0.45]
2X .018
[1.26]
.050
[3.0]
5X .118
[28.0]
1.102
[15.0]
.591
[15.5]
.610
[5.0]
.197
FORM "C"FORM "C"
HORIZONTAL MOUNT
THE SAME FOR BOTH VERTICAL AND HORIZONTAL MOUNTING VERSIONS
NOTE: MOUNTING HOLE DIAMETERS AND CENTER TO CENTER DIMENSIONS ARE
PC BOARD LAYOUT
WIRING DIAGRAM
VIEWED TOWARD TERMINALS
VIEWED TOWARD TERMINALS
VERTICAL MOUNT
VERTICAL MOUNT
FORM "A" FORM "A"
VERTICAL MOUNT
HORIZONTAL MOUNT
HORIZONTAL MOUNT
12 4 5
12 4 5
12 3 4 5
12 3 4 5
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
Loading...