ZETTLER AZ725 Datasheet

`

AZ725

MINIATURE

POWER RELAY

FEATURES

Dielectric strength 5000 Vrms

16A switching – single pole contacts Isolation spacing greater than 8mm Moulded materials : all 94V-0

VDE 6010 – unsealed version only Sealed version available

UL file E43203, CSA file 700496

CONTACTS

Arrangement	SPST (1 Form A)
	SPDT (1 Form C)
Ratings	Resistive load :
	Max switched power : 384W, 4000VA
	Max switched current : 16A
	Max switched voltage : 150*VDC / 400VAC
	*Note : If switching voltage is greater than 30VDC, special
	precautions must be taken. Please contact the factory.
Rated Load
UL, CUR	16A at 250VAC resistive
Min Load	5VDC, 0.1A
Material	Silver AgCd0
Resistance	<30 miiliohms initially

COIL

Power
At Pickup Voltage	270mW
(typical)
Max Continuous	2.6W 20°C ambient
Dissipation	2.0W 40°C ambient
Temperature Rise	32°C at nominal coil voltage
Max Temperature	130°C

NOTES

1.All values at 20°C

2.Relay may pull in with less than ‘Must Operate’ value

3.PCB layout viewed towards terminals

4.Specifications subject to change without notice

GENERAL DATA

Life Expectancy	Minimum operations
Mechanical	2x107
Electrical	1x105 operations at rated load
Operate Time (typical)	7ms at nominal coil voltage
Release Time (typical)	3ms at nominal coil voltage
	(with no coil suppression)
Dielectric Strength	5000 Vrms coil to contact
(at sea level for 1 min)	1000 Vrms between open contacts
Insulation Resistance	1000 megohms min at 20°C. 500VDC,
	50% RH
Dropout	Greater than 10% of nominal coil voltage
Ambient Temperature	At nominal coil voltage
Operating	-40°C to 85°C
Storage	-40°C to 130°C
Vibration	0.062” DA at 10 – 55 Hz
Shock	10g
Enclosure	PBT polyester
Terminals	Tinned copper alloy
Weight	19 grammes

Logistic Design (UK) Limited

Unit 3 Eagle Centre Way, Sedgwick Road	Tel [phone]	www.zettlerrelay.com
Luton LU4 9US, United Kingdom	Fax [phone]	[e-mail]

LDZR201000