ZQ110
Mobile Printer User Manual
P1069083-001
Rev. A
- 2 -
ZQ110
Mobile Printer User Manual
Table of Contents
※ Manual Information & Usage Precautions ·································································· 7
1. Content Confirmation ·································································································· 14
2. Product Part Names····································································································· 15
3. Installation & Usage ····································································································· 16
3-1 Battery Installation ······························································································ 16
3-2 Battery Charging ································································································· 16
3-2-1 Battery Charging Usage ··············································································· 16
3-2-2 Single battery charger (Optional) Usage······················································· 17
3-2-3 Cigarette lighter adaptor (Optional) Usage ··················································· 17
3-2-4 Single Docking Cradle (Optional) Usage ······················································ 18
3-2-5 Quad Battery Charger / Quad Docking Cradle (Optional) Usage ················· 19
3-2-5-1 Connecting the cables ·········································································· 19
3-2-5-2 Charging Battery (Printer) ···································································· 20
3-3 Paper Installation ································································································ 21
3-4 Belt Clip Usage ··································································································· 22
3-5 Belt Strap (Optional) Usage ················································································ 23
3-6 Protective Case (Optional) Usage ······································································ 24
3-7 Vehicle holder (Optional) Usage ········································································· 25
3-8 Control Panel Usage ··························································································· 26
3-9 MSR Usage ········································································································ 27
4. Self-Test ························································································································ 28
5. Black Mark Paper Printing ·························································································· 31
5-1 Black mark Function Setting ··············································································· 31
5-2 Auto Calibration Function ··················································································· 31
6. iOS MFi Mode Setting (Optional) ················································································ 32
7. Peripherals Connection ······························································································· 33
7-1 Bluetooth® Connection ························································································ 33
7-2 Wireless LAN ······································································································ 33
7-3 Interface Cable Connection ················································································ 33
8. Printer Cleaning ··········································································································· 34
9. Appendix ······················································································································· 35
9-1 Specifications ······································································································ 35
9-2 Certification ········································································································· 36
9-3 Label Types ········································································································ 38
Rev. 1.00
- 3 -
ZQ110
Mobile Printer User Manual
■ Proprietary Statements
This manual contains proprietary information for Zebra Technologies Corporation. It is
intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the expressed written permission
of Zebra Technologies Corporation.
Product Improvements
Since continuous product improvement is a policy of Zebra Technologies Corporation, all
specifications and signs are subject to change without notice.
FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference with radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet or circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Exposure to Radio Frequency radiation. To conform to FCC RF exposure requirements this device shall be used in accordance with the operating conditions and instructions listed in this manual.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded
cables must be used with the unit to ensure compliance.
Changes or modifications to this unit not expressly approved by Zebra Technologies
Corporation could void the user’s authority to operate this equipment.
Rev. 1.00
- 4 -
ZQ110
Mobile Printer User Manual
Canadian Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
“IC:” before the equipment certification number signifies that the Industry Canada technical
specifications were met. It does not guarantee that the certified product will operate to the
user’s satisfaction.
Liability Disclaimer
Inasmuch as every effort has been made to supply accurate information in this manual,
Zebra Technologies Corporation is not liable for any erroneous information or omissions.
Zebra Technologies Corporation reserves the right to correct any such errors and
disclaims liability resulting therefrom.
No Liability for Consequential Damage
In no event shall Zebra Technologies Corporation or anyone else involved in the creation,
production, or delivery of the accompanying product (including hardware and software) be
liable for any damages whatsoever (including, without limitation, damages for loss of
business profits, business interruption, loss of business information, or other pecuniary
loss) arising out of the use of or the results of use of or inability to use such product, even
if Zebra Technologies Corporation has been advised of the possibility of such damages.
Because some states do not allow the exclusion of liability for consequential or incidental
damages, the above limitation may not apply to you.
Rev. 1.00
- 5 -
ZQ110
Mobile Printer User Manual
Copyrights
The copyrights in this manual and the label print engine described therein are owned by
Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software
in the label print engine may result in imprisonment of up to one year and fines of up to
$10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability.
This product may contain ZPL®, ZPL II®, and ZebraLink™ programs; Element Energy
Equalizer® Circuit; E3®; and AGFA fonts. Software © ZIH Corp. All rights reserved
worldwide.
ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo,
ZPL, ZPL II, Element Energy Equalizer Circuit, and E3 Circuit are registered trademarks of
ZIH Corp. All rights reserved worldwide.
Monotype®, Intellifont® and UFST® are trademarks of Monotype Imaging, Inc. registered
in the United States Patent and Trademark Office and may be registered in certain
jurisdictions.
Andy™, CG Palacio™, CG Century Schoolbook™, CG Triumvirate™, CG Times™,
Monotype Kai™, Monotype Mincho™ and Monotype Sung™ are trademarks of Monotype
Imaging, Inc. and may be registered in some jurisdictions.
HY Gothic Hangul™ is a trademark of Hanyang Systems, Inc.
Angsana™ is a trademark of Unity Progress Company (UPC) Limited.
Andale®, Arial®, Book Antiqua®, Corsiva®, Gill Sans®, Sorts® and Times New Roman®
are trademarks of The Monotype Corporation registered in the United States Patent and
Trademark Office and may be registered in certain jurisdictions.
Century Gothic™, Bookman Old Style™ and Century Schoolbook™ are trademarks of The
Monotype Corporation and may be registered in certain jurisdictions.
HGPGothicB™ is a trademark of the Ricoh company, Ltd. and may be registered in some
jurisdictions.
Univers™ is a trademark of Heidelberger Druckmaschinen AG, which may be registered in
certain jurisdictions, exclusively licensed through Linotype Library GmbH, a wholly owned
subsidiary of Heidelberger Druckmaschinen AG.
Futura® is a trademark of Bauer Types SA registered in the United States Patent and
Trademark Office and may be registered in some jurisdictions.
TrueType® is a trademark of Apple Computer, Inc. registered in the United States Patent
and Trademark Office and may be registered in certain jurisdictions.
All other product names are the property of their respective owners.
All other brand names, product names, or trademarks belong to their respective holders.
©2014 ZIH Corp.
Rev. 1.00
- 6 -
ZQ110
Mobile Printer User Manual
■ Introduction to the ZQ110
This user manual gives you the information you will need to operate the ZQ110 series
printer. For a list of supplemental manuals provided with the ZQ110, please refer to the
Manual Information section.
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in the Getting Ready to Print section)
and inspect the media compartment for damage.
• In case shipping is required, save the carton and all packing material.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the shipping company. Zebra
Technologies Corporation is not responsible for any damage incurred during shipment of
the printer and will not cover the repair of this damage under its warranty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.
Rev. 1.00
- 7 -
ZQ110
Mobile Printer User Manual
1. Windows CE Module Program Manual
This manual provides information on the dll files required for Windows CE application
program development.
2. Windows Driver Manual
This manual provides information on installation and main functions of the Windows
driver for this product.
3. Unified Utility Manual
This manual provides information on the software used to select functions of this
product, modify operation conditions, and so forth.
• VMSM (Virtual Memory Switch Manager)
- Provides information on setting the basic operation conditions of the product, the
use of non-hardware controls and software based virtual switches.
• NV Image Download Manager
- Provides information on downloading image files, such as logos, intended for
repetitive printing.
• Firmware Download Manager
- Provides information on downloading and installing the latest firmware.
4. Bluetooth Connection Manual
This manual provides information on the connection of this product with devices
equipped with Bluetooth functionality (Android/iOS smart phone).
5. Commands Manual
This manual provides information on the protocol and functions of the control
commands that can be used with this product.
6. Code Pages Manual
This manual provides information on each character code page that can be used
with this product.
■ Manual Information
※ Manual Information & Usage Precautions
This user’s manual contains basic information for product usage as well as for emergency
measures that may be required when using the ZQ110 printer.
※ For additional information on the ZQ110, please refer to the following supplemental
manuals:
Rev. 1.00
- 8 -
ZQ110
Mobile Printer User Manual
■ Safety Precautions
When using the ZQ110 printer, please follow the recommended safety regulations
provided below.
Warning
Violating the following instructions may cause serious injury.
1. Do not plug several products into one multi-outlet; this can provoke over-heating and a
fire.
• If the plug is wet or dirty, wipe it before usage.
• If the plug does not fit perfectly in the outlet, do not force it.
• Be sure to use only standard multi-plug outlets.
2. You must use only the supplied adaptor.
• It is dangerous to use other adaptors.
3. Do not pull the cable to unplug.
• This can damage the cable, resulting in a fire or a breakdown of the printer.
4. Keep the plastic bag (used to package the printer) out of children’s reach.
5. Do not plug in or unplug with wet hands.
6. Do not bend the cable by force or leave it under any heavy object.
• A damaged cable may cause a fire.
Rev. 1.00
- 9 -
ZQ110
Mobile Printer User Manual
Caution
Violating the following instructions may cause injury to the user or damage the
printer.
1. If you observe smoke, odor or noise from the printer, unplug it before taking
the following measures:
• Turn off the printer and unplug the unit from the electrical outlet.
• Contact an authorized Zebra Technologies service provider for repair.
2. Keep the packet of desiccant material (silica gel used in the packaging of the printer) out
of children’s reach.
3. Use only approved accessories for your printer; do not disassemble or attempt to
repair the printer yourself.
• Contact your authorized service provider for all service replacements.
• Do not touch the blade of the paper tear bar.
4. Keep liquids and foreign objects away from the printer.
• If any object or liquid falls into the printer, immediately unplug the printer and have it
checked by an authorized Zebra Technologies service provider.
Rev. 1.00
- 10 -
ZQ110
Mobile Printer User Manual
■ Battery Safety Precautions
Make sure you review the user manual carefully prior to product use.
To avoid risks of battery overheating, combustion, and explosion damage and/or decline in
performance and product life, handle batteries carefully and comply with the guidelines
below.
Danger
1. Do not allow liquids to enter or leak into the battery compartment.
2. Do not use or leave the battery in a location exposed to high temperatures.
3. When charging the battery, use the exclusive charger or follow the charging
requirements outlined by Zebra.
4. The battery has clearly delineated positive and negative poles. When inserting the
battery into the charger and/or product, ensure that the battery is properly aligned.
5. Do not heat the battery or place it in a fire.
6. Do not allow the battery’s positive (+) and negative (-) poles to contact any metals. In
addition, do not carry or store the battery with metal items.
7. Do not subject the battery to strong shock.
8. Do not pierce the battery with a sharp object, or hit it with a heavy object. Avoid
accidental short circuiting of any battery. Allowing battery terminals to contact
conductive material will create a short circuit may cause burns and other injuries or
could start a fire.
9. Do not solder the battery.
10. Do not disassemble and/or modify the battery.
11. Do not charge near a source of heat or in direct sunlight.
12. Do not expose the battery to high temperatures over
in a hot or humid place.
13. Do not use the battery if it is damaged or if the exterior is deformed in any way.
Rev. 1.00
60o
C, and do not use or store it
- 11 -
ZQ110
Mobile Printer User Manual
Warning
1. Do not place the battery within the reach of small children to prevent swallowing. If a
child swallows the battery, consult a physician immediately.
2. Do not place the battery in a microwave oven and/or high voltage appliance.
3. Do not combine and use any battery of different capacity and/or type with the primary
battery
4. If during battery usage, storage, or charging, a strange odor or conditions differing from
normal operations, such as condensation, color changes, warping, and so forth, are
detected, remove the battery from the product or charger and discontinue use.
5. If the battery is not charged after the recommended charging time, discontinue charging.
6. If the battery is leaking electrolytic solution and the solution enters the eyes,
immediately rinse the eye with clean water, and consult a physician. Neglecting to do so
may cause permanent eye injuries.
Rev. 1.00
- 12 -
ZQ110
Mobile Printer User Manual
Caution
1. Do not use or leave the battery in a location exposed to high temperatures or intense
direct sunlight.
2. Do not use the battery in a location that is prone to static electricity (above the
recommended levels in the manufacturer’s product warranty).
3. The temperature ranges for battery usage are as follows. Any usage outside of these
ranges may result in the battery overheating, damage, and performance and product life
may be reduced.
a. Charging: 0 ~ 40℃
b. Product Usage: -20 ~ 60℃
c. Storage: -20 ~ 60℃ (30 days)
d. Long-Term Storage: -20 ~ 40℃ (90 days)
4. Please review the ZQ110 Quad Battery Charger Installation Guide carefully for charging
instructions.
5. If, upon first use, a strange odor, overheating, and/or anything deemed out of the
ordinary is detected, discontinue use and contact an authorized Zebra Technologies
service provider.
6. Store the battery in a location that is out of the reach of small children. During usage,
make sure to place the charger and/or product out of the reach of small children.
7. If the battery is leaking and the solution comes into contact with the skin or clothing,
immediately rinse the affected area with clean water.
8. Carefully review the user manual and precautions prior to use.
9. When replacing the battery in the printer, use a battery equivalent to the one originally
installed by the manufacturer. Dispose of used batteries per the instructions provided by
the manufacturer.
Rev. 1.00
Loading...