MC3300X
Mobile Computer
Quick Start Guide
MN-003567-01EN Rev. A
MC3300x Mobile Computer Quick Start Guide
Copyright
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions
worldwide. Google, Android, Google Play and other marks are trademarks of Google LLC. All other trademarks are the
property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright
WARRANTY: For complete warranty information, go to www.zebra.com/warranty
END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula
.
.
.
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra
Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment
described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other
purpose without the express, written permission of Zebra Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to
change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however,
errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying
product (including hardware and software) be liable for any damages whatsoever (including, without limitation,
consequential damages including loss of business profits, business interruption, or loss of business information) arising out
of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the
possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
Warranty
For the complete Zebra hardware product warranty statement, go to: www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
2
MC3300x Mobile Computer Quick Start Guide
If you have a problem using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with
the equipment, they will contact the Zebra Global Customer Support at www.zebra.com/support.
For the latest version of this guide go to: www.zebra.com/support.
Provide Documentation Feedback
If you have comments, questions, or suggestions about this guide, send an email to EVM-Techdocs@zebra.com.
Configurations
MC3300x used in this guide refers to all configurations, except where noted. MC3300x-G refers to the Trigger
configuration. MC3300x-R refers to the Rotate configuration. MC3300x-S refers to the Straight configuration.
3
MC3300x Mobile Computer Quick Start Guide
MC3300x-G Features
Front View
Figure 1 MC3300x-G Front View
1
8
2
3
4
NOTE The MC3300x-G does not ship with a pre-installed hand strap. However, one can be purchased separately as
a standalone accessory (SG-MC33-HDSTPG-01) if required.
7
6
5
Table 1 MC3300x-G Features - Front View
Number Item Function
1 Display Displays all information needed to operate the MC3300x-G.
2 Charge
/Application
Notification LED
or Scan/Decode
Status
3 Trigger Initiates data capture when a scan application is enabled.
4 Battery Release
Latch
5 Microphone Use for communications in Handset mode.
Indicates the battery charge state while charging, an application
notification was received, or the scan/decode status.
Release the battery from the device.
4
MC3300x Mobile Computer Quick Start Guide
Table 1 MC3300x-G Features - Front View (Continued)
Number Item Function
6 Power Key Press to suspend and resume device. Provides the following options:
Power off - Turn off the device.
Restart - Reboot the device when software stops responding.
Screenshot - Takes a snapshot of the current screen.
7 Keypad Use to enter data and navigate on screen functions.
8 Scan Button Initiates data capture when a scan application is enabled.
Back View
Figure 2 MC3300x-G Back View
14
10
11
12
13
Table 2 MC3300x-G Features - Back View
Number Item Function
10 Battery Provides power for operating the device.
11 Battery Release
Latch
12 Speaker Provides audio output for video and music playback.
Release the battery from the device.
5
MC3300x Mobile Computer Quick Start Guide
Table 2 MC3300x-G Features - Back View (Continued)
Number Item Function
13 Scanner Exit
Window
14 NFC Antenna Provides communication with other NFC-enabled devices.
Provides data capture using integrated scanner/imager option.
6
MC3300x Mobile Computer Quick Start Guide
MC3300x-R Features
Rotating Scan Turret
The MC3300x-R features a Rotating Turret with three position stops. This feature offers greater scanning flexibility.
CAUTION Do not try to rotate the turret past the side position stops. Damage to device may occur.
Figure 3 MC3300x-R Rotating Turret
Position Stop
Position Stop
Position Stop
Front View
Figure 4 MC3300x-R Front View
9
8
7
1
2
3
4
5
6
7
MC3300x Mobile Computer Quick Start Guide
Table 3 MC3300x-R Features - Front View
Number Item Function
1 Rotating Turret Rotates for easy scanning positions.
2 Display Displays all information needed to operate the MC3300x-R.
3 Charge
/Application
Notification LED
or Scan/Decode
Status
4 Side Key Scan
Button
5 Battery Release
Latch
6 Power Key Press to suspend and resume device. Provides the following options:
7 Microphone Use for communications in Handset mode.
8 Keypad Use to enter data and navigate on screen functions.
9 Scan Button Initiates data capture when a scan application is enabled.
Indicates the battery charge state while charging, an application
notification was received, or the scan/decode status.
Initiates data capture when a scan application is enabled.
Release the battery from the device.
Power off - Turn off the device.
Restart - Reboot the device when software stops responding.
Screenshot - Takes a snapshot of the current screen.
Back View
Figure 5 MC3300x-R Back View
10
11
12
13
17
16
15
14
8
MC3300x Mobile Computer Quick Start Guide
Table 4 MC3300x-R Features - Back View
Number Item Function
10 Battery Provides power for operating the device.
11 Battery Release
Latch
12 Side Key Scan
Button
13 Speaker Provides audio output for video and music playback.
14 Scanner Exit
Window
15 NFC Antenna Provides communication with other NFC-enabled devices.
16 Camera/Flash Provides image capture capability with LED illumination.
17 Hand Strap Use for securely holding the device. Comes pre-installed on every
Release the battery from the device.
Initiates data capture when a scan application is enabled.
Provides data capture using the scanner.
MC3300x-S & MC3300x-R device.
9
MC3300x Mobile Computer Quick Start Guide
MC3300x-S Features
Front View
Figure 6 MC3300x-S Front View
1
2
8
7
6
5
Table 5 MC3300x-S Features - Front View
Number Item Function
1 Display Displays all information needed to operate the MC3300x-S.
2 Charge
/Application
Notification LED
or Scan/Decode
Status
3 Side Key Scan
Button
Indicates the battery charge state while charging, an application
notification was received, or the scan/decode status.
Initiates data capture when a scan application is enabled.
3
4
4 Battery Release
Latch
5 Power Key Press to suspend and resume device. Provides the following options:
6 Microphone Use for communications in Handset mode.
7 Keypad Use to enter data and navigate on screen functions.
8 Scan Button Initiates data capture when a scan application is enabled.
Release the battery from the device.
Power off - Turn off the device.
Restart - Reboot the device when software stops responding.
Screenshot - Takes a snapshot of the current screen.
10
Back View
Figure 7 MC3300x-S Back View
9
MC3300x Mobile Computer Quick Start Guide
16
15
14
10
Table 6 MC3300x-S Features - Back View
Number Item Function
9 Battery Provides power for operating the device.
10 Battery Release
11 Side Key Scan
12 Speaker Provides audio output for video and music playback.
13 Scanner Exit
14 NFC Antenna Provides communication with other NFC-enabled devices.
11
12
13
Release the battery from the device.
Latch
Initiates data capture when a scan application is enabled.
Button
Provides data capture using the scanner.
Window
15 Camera/Flash Provides image capture capability with LED illumination.
16 Hand Strap Use for securely holding the device. Comes pre-installed on every
MC3300x-S & MC3300x-R device.
11
MC3300x Mobile Computer Quick Start Guide
Setup
To start using the MC3300x for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the MC3300x
• Power on the MC3300x.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the
documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.
CAUTION Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that
the operator is properly grounded.
1. Using a coin or finger, remove the microSD card cover.
Figure 8 Remove microSD Card Cover
2. Slide the microSD card holder to the Open position.
Figure 9 Unlock microSD Card Holder
3. Lift the microSD card holder.
Figure 10 Lift microSD Card Holder
12
Loading...