Zebra MC3300x Product Reference Guide

Download

MC3300x

Mobile Computer

Product Reference Guide

for Android™ 11

MN-004219-01EN Rev A

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google LLC. All other trademarks are the property of their respective owners. © 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

For further information regarding legal and proprietary statements, go to:

COPYRIGHTS:zebra.com/copyright WARRANTY:zebra.com/warranty END USER LICENSE AGREEMENT: zebra.com/eula

Proprietary Statement

This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies.

Product Improvements

Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice.

Liability Disclaimer

Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

About This Guide.............................................................................................................................. 13

Configurations................................................................................................................ 13

Notational Conventions.................................................................................................. 15

Icon Conventions ........................................................................................................... 16

Service Information ........................................................................................................ 16

Determining Software Versions...................................................................................... 17

Determining the Serial Number...................................................................................... 17

Getting Started.................................................................................................................................. 18

Unpacking ...................................................................................................................... 18

MC3300x-G Features..................................................................................................... 19

Front View .............................................................................................................. 19

Back View............................................................................................................... 20

MC3300x-R Features.................................................................................................... 21

Rotating Scan Turret .............................................................................................. 21

Front View .............................................................................................................. 21

Back View............................................................................................................... 22

MC3300x-S Features..................................................................................................... 23

Front View .............................................................................................................. 23

Back View............................................................................................................... 24

Setting Up the Device .................................................................................................... 25

Installing a microSD Card....................................................................................... 25

Installing the MC3300x-G Battery........................................................................... 27

Installing the MC3300x-R/S Battery ....................................................................... 28

Charging the Battery............................................................................................... 29

Charging Indicators ................................................................................................ 30

Charging Temperature..................................................................................... 30

Charging Spare Batteries................................................................................. 31

Hot Swap Mode/Backup Power ....................................................................... 31

Real-Time Clock Backup................................................................................................ 31

Replacing the Battery in the MC3300x-G...................................................................... 32

Contents

Replacing the Battery in the MC3300x-R/S ................................................................... 33

Using the Device............................................................................................................................... 36

Home Screen ................................................................................................................. 36

Setting Home Screen Rotation ............................................................................... 37

Status Bar............................................................................................................... 37

Notification Icons.............................................................................................. 38

Status Icons ..................................................................................................... 39

Managing Notifications ........................................................................................... 40

Opening the Quick Access Panel ........................................................................... 40

Quick Access Panel Icons................................................................................ 41

Editing Icons on the Quick Settings Bar ................................................................. 42

Battery Management...................................................................................................... 42

Checking Battery Status ......................................................................................... 42

Monitoring Battery Usage ....................................................................................... 42

Low Battery Notification.......................................................................................... 43

Interactive Sensor Technology....................................................................................... 43

Waking the Device ......................................................................................................... 43

USB Communication...................................................................................................... 43

Transferring Files.................................................................................................... 44

Transferring Photos ................................................................................................ 44

Disconnect from the Host Computer ...................................................................... 44

Settings.............................................................................................................................................. 45

Accessing Settings......................................................................................................... 45

Display Settings ............................................................................................................. 45

Setting the Screen Brightness Manually................................................................. 45

Setting Night Light .................................................................................................. 45

Setting Screen Rotation.......................................................................................... 46

Setting Screen Timeout .......................................................................................... 46

Setting Font Size .................................................................................................... 46

Touch Panel Mode ................................................................................................. 47

Setting the Date and Time ............................................................................................. 47

General Sound Setting................................................................................................... 47

Sound Options........................................................................................................ 48

Setting Wake-Up Sources.............................................................................................. 48

Remapping a Button ...................................................................................................... 49

Remappable Keys.......................................................................................................... 50

UI Listed Keys ........................................................................................................ 50

Other Remappable Keys ........................................................................................ 50

Non-Remappable Keys .......................................................................................... 51

Contents

Keyboards...................................................................................................................... 51

Keyboard Configuration.......................................................................................... 51

Enabling Keyboards......................................................................................... 51

Switching Between Keyboards......................................................................... 51

Using the Android and Gboard Keyboards............................................................. 51

Edit Text ........................................................................................................... 52

Entering Numbers, Symbols, and Special Characters..................................... 52

Using the Enterprise Keyboard............................................................................... 52

Numeric Tab..................................................................................................... 52

Alpha Tab......................................................................................................... 52

Additional Character Tab ................................................................................. 52

Scan Tab.......................................................................................................... 52

Language Usage............................................................................................................ 53

Changing the Language Setting ............................................................................. 53

Adding Words to the Dictionary .............................................................................. 53

Notifications.................................................................................................................... 53

Setting App Notifications ........................................................................................ 53

Viewing Notification Settings for All Apps ........................................................ 54

Controlling Lock Screen Notifications .............................................................. 54

Blink Light......................................................................................................... 55

Applications ...................................................................................................................................... 56

Accessing Apps.............................................................................................................. 57

Switching Between Recent Apps............................................................................ 57

Battery Manager............................................................................................................. 57

Opening Battery Manager ...................................................................................... 58

Battery Manager Information Tab........................................................................... 58

Camera ......................................................................................................................... 60

Taking Photos......................................................................................................... 60

Recording Videos ................................................................................................... 61

Camera Settings..................................................................................................... 62

DataWedge Demonstration............................................................................................ 63

Scanner Selection .................................................................................................. 63

PTT Express Voice Client ............................................................................................. 65

PTT Express User Interface ................................................................................... 65

PTT Audible Indicator ............................................................................................. 66

PTT Notification Icons ............................................................................................ 66

Enabling PTT Communication................................................................................ 67

Selecting a Talk Group ........................................................................................... 67

PTT Communication............................................................................................... 67

Creating a Group Call ...................................................................................... 67

Responding with a Private Response .............................................................. 67

Contents

Disabling PTT Communication ............................................................................... 68

RxLogger....................................................................................................................... 69

RxLogger Configuration.......................................................................................... 69

Configuration File ................................................................................................... 69

Enabling Logging.................................................................................................... 69

Disabling Logging ................................................................................................... 69

Extracting Log Files ................................................................................................ 69

Backing Up ............................................................................................................. 69

RxLogger Utility ...................................................................................................... 70

Initiating the Main Chat Head........................................................................... 70

Removing the Main Chat Head........................................................................ 70

Viewing Logs.................................................................................................... 70

Removing a Sub Chat Head Icon..................................................................... 70

Backing Up In Overlay View............................................................................. 70

Data Capture ..................................................................................................................................... 71

Laser Scanning .............................................................................................................. 71

Imaging .......................................................................................................................... 71

Operational Modes ................................................................................................. 71

Scanning Considerations ............................................................................................... 72

Scanning with Internal Imager........................................................................................ 73

Scanning with Laser Scanner ........................................................................................ 74

Scanning with RS5100 Ring Scanner............................................................................ 74

Scanning with the RS6000 Bluetooth Ring Scanner...................................................... 76

Scanning with RS507/RS507X Hands-Free Imager ..................................................... 78

Scanning with the DS2278 Digital Scanner ................................................................... 79

Scanning with the DS3678 Digital Scanner ................................................................... 80

Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner ..................... 82

Scanning with the LI3678 Linear Scanner ..................................................................... 83

Pairing the Bluetooth Ring Scanner............................................................................... 84

Pairing in SSI Mode Using Near Field Communication .......................................... 84

Pairing in HID Mode Using Near Field Communication.......................................... 85

Pairing Using Simple Serial Interface ..................................................................... 86

Pairing Using Bluetooth Human Interface Device .................................................. 87

Pairing a Bluetooth Scanner .......................................................................................... 88

Pairing Using Simple Serial Interface ..................................................................... 88

Pairing Using Bluetooth Human Interface Device .................................................. 89

DataWedge .................................................................................................................... 90

Enabling DataWedge.............................................................................................. 90

Disabling DataWedge............................................................................................. 90

Supported Decoders............................................................................................... 90

Contents

Wireless............................................................................................................................................. 93

Wireless Local Area Networks ....................................................................................... 93

Connecting to a Wi-Fi Network............................................................................... 94

Removing a Wi-Fi Network..................................................................................... 94

WLAN Configuration ...................................................................................................... 94

Configuring a Secure Wi-Fi Network ...................................................................... 94

Manually Adding a Wi-Fi Network .......................................................................... 95

Configuring for a Proxy Server ............................................................................... 96

Configuring the Device to Use a Static IP Address ................................................ 96

Wi-Fi Preferences................................................................................................... 97

Additional Wi-Fi Settings ........................................................................................ 97

Wi-Fi Direct............................................................................................................. 98

Bluetooth........................................................................................................................ 98

Adaptive Frequency Hopping ................................................................................. 98

Security................................................................................................................... 99

Bluetooth Profiles ................................................................................................... 99

Bluetooth Power States ........................................................................................ 100

Bluetooth Radio Power......................................................................................... 100

Enabling Bluetooth......................................................................................... 101

Disabling Bluetooth ........................................................................................ 101

Discovering Bluetooth Device(s) .......................................................................... 101

Changing the Bluetooth Name ............................................................................. 101

Connecting to a Bluetooth Device ........................................................................ 101

Selecting Profiles on the Bluetooth Device........................................................... 102

Unpairing a Bluetooth Device ............................................................................... 102

Using a Bluetooth Headset................................................................................... 102

Cast.............................................................................................................................. 102

Near Field Communications......................................................................................... 102

Reading NFC Cards ............................................................................................. 103

Sharing Information Using NFC............................................................................ 104

Enterprise NFC Settings....................................................................................... 105

Accessories..................................................................................................................................... 106

Introduction .................................................................................................................. 106

MC3300x Accessories ................................................................................................. 106

Battery Charging .......................................................................................................... 112

Main Battery Charging.......................................................................................... 112

Spare Battery Charging ........................................................................................ 112

Charging Temperature ......................................................................................... 113

1-Slot USB Charge Cradle.......................................................................................... 114

Setup .................................................................................................................... 115

Contents

Charging the MC3300x Battery ............................................................................ 115

Charging an MC3300x Spare Battery................................................................... 115

Battery Charging in 1- Slot USB Charge Cradle................................................... 116

5-Slot Charge Only ShareCradle ................................................................................ 117

Setup .................................................................................................................... 118

Charging the MC3300x Battery ............................................................................ 118

Battery Charging in the 5-Slot Charge Only ShareCradle .................................... 118

5-Slot Ethernet ShareCradle....................................................................................... 119

Setup .................................................................................................................... 120

Charging the MC3300x Battery ............................................................................ 120

Battery Charging in the 5-Slot Ethernet ShareCradle........................................... 120

Daisy-chaining Ethernet ShareCradles ................................................................ 120

Ethernet Settings............................................................................................ 121

Configuring Ethernet Proxy Settings.............................................................. 121

Configuring Ethernet Static IP Address.......................................................... 122

Establishing Ethernet Connection ........................................................................ 123

LED Indicators ...................................................................................................... 124

5-Slot ShareCradle with 4-Slot Battery Charger ......................................................... 125

Setup .................................................................................................................... 126

Charging the MC3300x Battery ............................................................................ 126

Charging Spare Batteries ..................................................................................... 126

Battery Charging in the 5-Slot ShareCradle with 4-Slot Battery Charger ............. 126

5-Slot Ethernet ShareCradle with 4-Slot Battery Charger........................................... 127

Setup .................................................................................................................... 128

Charging the MC3300x Battery ............................................................................ 128

Charging Spare Batteries ..................................................................................... 128

Battery Charging in the 5-Slot Ethernet ShareCradle with 4-Slot Battery

Charger................................................................................................................. 128

Daisy-chaining Ethernet Cradles .......................................................................... 129

Ethernet Settings............................................................................................ 129

Configuring Ethernet Proxy Settings.............................................................. 130

Configuring Ethernet Static IP Address.......................................................... 130

Establishing Ethernet Connection ........................................................................ 131

LED Indicators ...................................................................................................... 131

4-Slot Spare Battery Charger...................................................................................... 133

Setup .................................................................................................................... 133

Charging Spare Batteries ..................................................................................... 133

20-Slot Spare Battery Charger.................................................................................... 135

Setup .................................................................................................................... 135

Charging Spare Batteries ..................................................................................... 135

USB Charge Cable...................................................................................................... 137

Connecting the USB Charge Cable to Device...................................................... 137

Contents

Connecting the USB Charge Cable to Host Computer......................................... 138

Main Battery Charging ................................................................................... 138

Charging the Device ............................................................................................. 139

Main Battery Charging ................................................................................... 139

Disconnecting the USB Charge Cable ................................................................. 139

MC33XX Charge Only Adapter................................................................................... 141

MC33XX Charge Only Adapter Installation .......................................................... 141

MC3300x-G Rubber Boot............................................................................................ 143

MC3300x-R Rubber Boot............................................................................................ 144

MC3300x-S Rubber Boot............................................................................................ 145

Rigid Holster................................................................................................................ 146

MC3300x-G Fabric Holster ......................................................................................... 148

Belt Strap.............................................................................................................. 148

Shoulder Strap...................................................................................................... 148

Using the Belt Strap.............................................................................................. 149

Using the Shoulder Strap ..................................................................................... 150

MC3300x-R/S Fabric Holster ...................................................................................... 152

Belt Clip ................................................................................................................ 152

Shoulder Strap...................................................................................................... 152

Using the Belt Clip ................................................................................................ 153

Using the Shoulder Strap ..................................................................................... 154

Un-powered Forklift Mount.......................................................................................... 155

Replacement Hand Strap for MC3300x-G .................................................................. 157

Replacement Hand Strap for MC3300x-R/S................................................................ 158

Application Deployment................................................................................................................. 160

Security ........................................................................................................................ 160

Secure Certificates....................................................................................................... 160

Installing a Secure Certificate ...................................................................................... 160

Configuring Credential Storage Settings .............................................................. 161

Development Tools ...................................................................................................... 161

Android Application Development ........................................................................ 161

Development Workstation .............................................................................. 161

Enabling Developer Options .......................................................................... 161

EMDK for Android................................................................................................. 162

StageNow ............................................................................................................. 162

GMS Restricted............................................................................................................ 162

ADB USB Setup........................................................................................................... 162

Enabling USB Debugging..................................................................................... 162

Entering Android Recovery Manually ................................................................... 163

Application Installation ................................................................................................. 163

Contents

Installing Applications Using the USB Connection ............................................... 164

Installing Applications Using the Android Debug Bridge ...................................... 164

Installing Applications Using the Wireless Android Debug Bridge........................ 165

Installing Applications Using a microSD Card ...................................................... 166

Uninstalling an Application ................................................................................... 166

Performing a System Update....................................................................................... 166

Downloading the System Update Package .......................................................... 167

Performing a System Update Using microSD Card.............................................. 167

Performing a System Update Using ADB............................................................. 167

Verifying System Update Installation.................................................................... 168

Enterprise Reset .......................................................................................................... 168

Performing an Enterprise Reset From Device Settings........................................ 168

Downloading the Enterprise Reset Package ........................................................ 168

Performing an Enterprise Reset Using microSD Card ......................................... 169

Performing an Enterprise Reset Using ADB......................................................... 169

Performing a Factory Reset ......................................................................................... 170

Downloading the Factory Reset Package ............................................................ 170

Performing a Factory Reset Using microSD Card................................................ 170

Performing a Factory Reset Using ADB ............................................................... 171

Storage......................................................................................................................... 171

Random Access Memory ..................................................................................... 172

Viewing Memory............................................................................................. 172

Internal Storage .................................................................................................... 172

Viewing Internal Storage................................................................................ 172

External Storage................................................................................................... 172

VViewing External Storage ............................................................................ 172

Formatting a microSD Card or USB Drive as Portable Storage..................... 173

Formatting a microSD Card as Internal Memory............................................ 173

Enterprise Folder .................................................................................................. 173

Managing Apps ............................................................................................................ 173

App Details ........................................................................................................... 173

Managing Downloads................................................................................................... 174

Maintenance and Troubleshooting ............................................................................................... 175

Maintaining the Device................................................................................................. 175

Battery Safety Guidelines............................................................................................. 175

Cleaning Instructions.................................................................................................... 176

Approved Cleanser Active Ingredients ................................................................. 176

Harmful Ingredients .............................................................................................. 177

Device Cleaning Instructions ................................................................................ 177

Special Cleaning Notes ........................................................................................ 177

Contents

Cleaning Materials Required ................................................................................ 177

Cleaning Frequency ............................................................................................. 178

Cleaning the Device..................................................................................................... 178

Housing ................................................................................................................ 178

Display.................................................................................................................. 178

Camera and Exit Window ..................................................................................... 178

Cleaning Battery Connectors................................................................................ 178

Cleaning Cradle Connectors ................................................................................ 178

Troubleshooting ........................................................................................................... 179

Resetting the Device ............................................................................................ 179

Performing a Soft Reset................................................................................. 179

Performing a Hard Reset ............................................................................... 179

MC3300x .............................................................................................................. 180

1-Slot USB Charge Cradle ................................................................................... 181

5-Slot Charge Only ShareCradle.......................................................................... 183

5-Slot Ethernet ShareCradle ................................................................................ 184

5-Slot ShareCradle with 4-Slot Battery Charger................................................... 184

5-Slot Ethernet ShareCradle with 4-Slot Battery Charger .................................... 185

4-Slot Spare Battery Charger ............................................................................... 186

20-Slot Spare Battery Charger ............................................................................. 187

USB Charge Cable ............................................................................................... 188

Technical Specifications................................................................................................................ 189

Introduction .................................................................................................................. 189

Data Capture Supported Symbologies......................................................................... 189

SE965 Decode Zone ............................................................................................ 189

SE4770/SE4720 Decode Zone ............................................................................ 190

SE4770/SE4720 Decode Zone Dark Room ......................................................... 191

SE4850-ER Decode Zone .................................................................................... 191

MC3300x Accessory Technical Specifications............................................................. 192

MC3300x Connector Pin-Out ............................................................................... 192

1-Slot USB Charge Cradle with Spare Battery Charger Technical

Specifications ....................................................................................................... 193

5-Slot Charge Only ShareCradle Technical Specifications .................................. 193

5-Slot Ethernet ShareCradle Technical Specifications......................................... 194

5-Slot Charge ShareCradle with 4-Slot Battery Charger Technical

Specifications ....................................................................................................... 194

5-Slot Ethernet ShareCradle with 4-Slot Battery Charger Technical

Specifications ....................................................................................................... 195

4-Slot Spare Battery Charger Technical Specifications........................................ 195

20-Slot Spare Battery Charger Technical Specifications...................................... 196

Contents

USB Charge Cable Technical Specifications ....................................................... 197

Keypads........................................................................................................................................... 198

Introduction .................................................................................................................. 198

MC3300x 29-Key Keypad ............................................................................................ 198

MC3300x 38-Key Keypad ............................................................................................ 201

MC3300x 47-Key Keypad ............................................................................................ 205

Index ................................................................................................................................................ 209

About This Guide

Configurations

MC3300x used in this guide refers to all configurations, except where noted. MC3300x-G refers to the Trigger configuration. MC3300x-R refers to the Rotate configuration. MC3300x-S refers to the Straight configuration. MC3300x-S45 refers to the 45 degree angle Straight configuration.

This guide covers the following configurations:

Table 1 Configurations

Form

Factor

Gun

Radios

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

Display

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

Memory

4 GB RAM

/ 16 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

Data Capture

Options

SE965 1D

Laser

SE4720

1D/2D Imager

SE965, 1D

Laser

SE4770

1D/2D Imager

SE4850

1D/2D ERI

SE965 1D

Laser

SE4770

1D/2D Imager

SE4850

1D/2D ERI

USB

Camera

No Yes Android-based

No No

No No Android-based

Cable &

Power

Adapter

Operating

System

AOSP 11

Android-based

AOSP 11

GMS 11

Table 1 Configurations (Continued)

Form

Factor

Radios

WLAN: IEEE

802.11a/b/g/n/ac

Rotate

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Rotate

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Rotate

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

About This Guide

Display

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

Memory

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

Data Capture

Options

SE965 1D

Laser

SE965 1D

Laser

SE965 1D

Laser

USB

Camera

Cable &

Power

Adapter

Operating

System

No No Android-based

AOSP 11

No No Android-based

GMS 11

Yes No Android-based

GMS 11

Straight

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

4 GB RAM

/ 16 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

SE965 1D

Laser

SE4720

1D/2D Imager

SE4770

1D/2D Imager

SE4850

1D/2D ERI

SE4770

1D/2D Imager

SE4850

1D/2D ERI

No Yes Android-based

AOSP 11

No No Android-based

AOSP 11

Yes No Android-based

AOSP 11

Table 1 Configurations (Continued)

Form

Factor

Radios

WLAN: IEEE

802.11a/b/g/n/ac

Straight

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Straight

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Straight

@45

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Straight

@45

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

WLAN: IEEE

802.11a/b/g/n/ac

Straight

@ 45

WPAN: Bluetooth V5.0, V2.1

+ EDR w/ Bluetooth Low

Energy (BLE)

NFC

About This Guide

Display

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

4.0”

WVGA

Color

Memory

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

4 GB RAM

/ 32 GB

Flash

Data Capture

Options

SE965 1D

Laser

SE4770

1D/2D Imager

SE4850

1D/2D ERI

SE965 1D

Laser

SE4770

1D/2D Imager

SE4850

1D/2D ERI

SE4770

1D/2D Imager

SE4850

1D/2D ERI

SE4770

1D/2D Imager

SE4770

1D/2D Imager

USB

Camera

Cable &

Power

Adapter

Operating

System

Android-based

No No

GMS 11

Yes No Android-based

GMS 11

No No Android-based

AOSP 11

No No Android-based

GMS 11

Yes No Android-based

GMS 11

Notational Conventions

Notational conventions are used to highlight important information.

• Bold text is used to highlight the following:

• Dialog box, window and screen names

• Drop-down list and list box names

• Check box and radio button names

• Icons on a screen

• Key names on a keypad

• Button names on a screen

• Bullets (•) indicate:

• Action items

• Lists of alternatives

• Lists of required steps that are not necessarily sequential.

• Sequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.

Icon Conventions

The following icons are used throughout the document. The icons and their associated meanings are described below.

NOTE: The text here indicates information that is supplemental for the user to know and that is not required to complete a task.

IMPORTANT: The text here indicates information that is important for the user to know.

About This Guide

CAUTION: If the precaution is not heeded, the user could receive minor or moderate injury.

WARNING: If danger is not avoided, the user CAN be seriously injured or killed.

DANGER: If danger is not avoided, the user WILL be seriously injured or killed.

Service Information

If you have a problem with your equipment, contact Customer Support for your region. Contact information is available at: zebra.com/support

When contacting support, please have the following information available:

• Serial number of the unit (found on manufacturing label)

• Model number or product name (found on manufacturing label)

• Software type and version number

Customer Support responds to calls by email or telephone within the time limits set forth in support agreements.

If the problem cannot be solved by Customer Support, the user may need to return the equipment for servicing and will be given specific directions. We are not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If applicable, remove the microSD card from the device before shipping for service.

If the device was purchased from a business partner, contact that business partner for support.

About This Guide

Determining Software Versions

Before contacting Customer Support, determine the current software version on your device.

1. Swipe down from the Status bar with two fingers to open the Quick Access panel, and then touch .

2. Touch About phone.

3. Scroll to view the following information:

• Android security update

• Google Play system update

• Kernel version

• Build number

Determining the Serial Number

Before contacting Customer Support, determine the serial number of your device.

1. Swipe down from the Status bar with two fingers to open the Quick Access panel, and then touch .

2. Touch About phone > Model & hardware > Serial number.

Getting Started

Unpacking

1. Carefully remove all protective material from the device and save the shipping container for later

storage and shipping.

2. Verify that the following are included:

• Mobile computer

• Lithium-ion battery

• Regulatory Guide.

3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global

Customer Support center immediately.

MC3300x-G Features

Front View

Figure 1 MC3300x-G Front View

Getting Started

NOTE: The MC3300x-G does not ship with a pre-installed hand strap. However, one can be purchased separately as a standalone accessory (SG-MC33-HDSTPG-01) if required.

Table 2 MC3300x-G Features - Front View

Number Item Function

1 Display Displays all information needed to operate the device.

2 Charge

/Application

Notification LED

or Scan/Decode

Status

3 Trigger Initiates data capture when a scan application is enabled.

4 Battery Release

Latch

5 Microphone Use for communications in Handset mode.

Indicates the battery charge state while charging, an application notification was received, or the scan/decode status.

Release the battery from the device.

Getting Started

Table 2 MC3300x-G Features - Front View (Continued)

Number Item Function

6 Power Key Press to suspend and resume device. Long press provides the following

options:

Power off - Turn off the device.

Restart - Reboot the device when software stops responding.

7 Keypad Use to enter data and navigate on screen functions.

8 Scan Button Initiates data capture when a scan application is enabled.

Back View

Figure 2 MC3300x-G Back View

Table 3 MC3300x-G Features - Back View

Number Item Function

10 Battery Provides power for operating the device.

11 Battery Release

Latch

12 Speaker Provides audio output for video and music playback.

13 Scanner Exit

Window

14 NFC Antenna Provides communication with other NFC-enabled devices.

Release the battery from the device.

Provides data capture using integrated scanner/imager option.

MC3300x-R Features

Rotating Scan Turret

The MC3300x-R features a Rotating Turret with three position stops. This feature offers greater scanning flexibility.

CAUTION: Do not try to rotate the turret past the side position stops. Damage to device may occur.

Figure 3 MC3300x-R Rotating Turret

Position Stop

Getting Started

Position Stop

Front View

Figure 4 MC3300x-R Front View

Getting Started

Table 4 MC3300x-R Features - Front View

Number Item Function

1 Rotating Turret Rotates for easy scanning positions.

2 Display Displays all information needed to operate the device.

3 Charge

/Application

Notification LED

or Scan/Decode

Status

4 Side Key Scan

Button

5 Battery Release

Latch

6 Power Key Press to suspend and resume device. Long press provides the following

7 Microphone Use for communications in Handset mode.

8 Keypad Use to enter data and navigate on screen functions.

9 Scan Button Initiates data capture when a scan application is enabled.

Indicates the battery charge state while charging, an application notification was received, or the scan/decode status.

Initiates data capture when a scan application is enabled.

Release the battery from the device.

options:

Power off - Turn off the device.

Restart - Reboot the device when software stops responding.

Back View

Figure 5 MC3300x-R Back View

Getting Started

Table 5 MC3300x-R Features - Back View

Number Item Function

10 Battery Provides power for operating the device.

11 Battery Release

Latch

12 Side Key Scan

Button

13 Speaker Provides audio output for video and music playback.

14 Scanner Exit

Window

15 NFC Antenna Provides communication with other NFC-enabled devices.

16 Camera/Flash Provides image capture capability with LED illumination.

17 Hand Strap Use for securely holding the device. Comes pre-installed on every

Release the battery from the device.

Initiates data capture when a scan application is enabled.

Provides data capture using the scanner.

MC3300x-S & MC3300x-R device.

MC3300x-S Features

Front View

Figure 6 MC3300x-S Front View

Getting Started

Table 6 MC3300x-S Features - Front View

Number Item Function

1 Display Displays all information needed to operate the device.

2 Charge

/Application

Notification LED

or Scan/Decode

Status

3 Side Key Scan

Button

4 Battery Release

Latch

5 Power Key Press to suspend and resume device. Long press provides the following

6 Microphone Use for communications in Handset mode.

7 Keypad Use to enter data and navigate on screen functions.

8 Scan Button Initiates data capture when a scan application is enabled.

Indicates the battery charge state while charging, an application notification was received, or the scan/decode status.

Initiates data capture when a scan application is enabled.

Release the battery from the device.

options:

Power off - Turn off the device.

Restart - Reboot the device when software stops responding.

Back View

Figure 7 MC3300x-S Back View

Getting Started

Table 7 MC3300x-S Features - Back View

Number Item Function

9 Battery Provides power for operating the device.

10 Battery Release

Latch

11 Side Key Scan

Button

12 Speaker Provides audio output for video and music playback.

13 Scanner Exit

Window

14 NFC Antenna Provides communication with other NFC-enabled devices.

15 Camera/Flash Provides image capture capability with LED illumination.

16 Hand Strap Use for securely holding the device. Comes pre-installed on every

Release the battery from the device.

Initiates data capture when a scan application is enabled.

Provides data capture using the scanner.

MC3300x-S & MC3300x-R device.

Setting Up the Device

To start using the device for the first time:

• Install a micro secure digital (SD) card (optional)

• Install the battery

• Charge the device

• Power on the device.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.

CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.

1. Using a coin or finger, remove the microSD card cover.

Getting Started

Slide the microSD card holder to the Open position.

3. Lift the microSD card holder.

4. Place the microSD card into the contact area with the contacts facing down.

5. Close the microSD card holder and slide the microSD card holder to the Lock position.

6. Replace the microSD card cover and ensure that it is installed properly.

Installing the MC3300x-G Battery

The MC3300x-G is compatible with the following batteries:

• MC3300x 7000 mAh PowerPrecision+ extended battery

• MC33XX 5200 mAh PowerPrecision+ high capacity battery

To install the battery:

1. Loosen the hand strap (if installed).

2. Align the battery into the battery compartment.

Getting Started

3. Slide the front of the battery into the battery compartment.

4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-G

return to the home position.

5. Tighten the hand strap (if installed).

6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device.

Getting Started

Installing the MC3300x-R/S Battery

The MC3300x-R/S is compatible with the following batteries:

• MC3300x 7000 mAh PowerPrecision+ extended battery

• MC33XX 5200 mAh PowerPrecision+ high capacity battery

• MC33XX 2740 mAh PowerPrecision+ standard battery

To install the battery:

1. Loosen the hand strap, if needed.

2. Align the top of the battery into the battery compartment.

3. Slide the front of the battery into the battery compartment.

4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-R/S

return to the home position.

5. Tighten the hand strap, if needed.

6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device.

Charging the Battery

CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines

on page 213.

Use the mobile computer cradles, cables and spare battery chargers to charge the mobile computer main battery. The main battery can be charged before insertion into the mobile computer or after it is installed.

The main battery that ships with the MC3300x device is the 7000 mAh PowerPrecision+ extended capacity battery pack (2.5X). The two legacy MC33 PowerPrercision+ batteries; 5200 mAh high capacity battery pack (2X) and the 2740 mAh standard capacity battery pack (1X) can be purchased separately for the MC3300x device.

The MC3300x-G is only compatible with the 7000 mAh (2.5X) and the 5200 mAh (2X) PowerPrecision+ batteries.

The MC3300x-R/S is compatible with all three PowerPrecision+ battery packs; 7000 mAh (2.5X), 5200 mAh (2X) and 2740 mAh (1X).

Use one of the spare battery chargers to charge the main battery (out of the mobile computer) or one of the cradles to charge the main battery while it is installed in the mobile computer.

Before using the mobile computer for the first time, fully charge the main battery until the green Charge LED indicator remains lit and charge the battery using a cable or a cradle with the appropriate power supply. For information about the accessories available for the MC3300x, see Accessories.

Getting Started

The MC3300x retains data in memory for at least five minutes when the mobile computer’s main battery is removed.

When the main battery reaches a critical battery level state (6%), the device shuts down.

Batteries must be charged within the 0° to +40° C (32° to 104° F) ambient temperature range.

The following accessories can be used to charge batteries:

• Cradles (and a power supply):

• 1-Slot USB Charge Cradle

• 5-Slot Charge Only ShareCradle

• 5-Slot Ethernet ShareCradle

• 5-Slot Charge ShareCradle + 4-Slot Spare Battery Charger

• 5-Slot Ethernet ShareCradle + 4-Slot Spare Battery Charger.

• Cables (and a power supply):

• USB Charge Cable.

• Spare Battery Chargers (and a power supply):

• 4-Slot Spare Battery Charger

• 20-Slot Spare Battery Charger.

NOTE: It is safe to leave the mobile computer and/or batteries on the charger for prolong durations. Both

the spare and terminal-based chargers stop charging when they detect that the battery is fully charged. Upon stopping, the batteries will slowly self-discharge, and if left on the charger long enough, will eventually fall to a point where the charger re-initiates a charge until the batteries are fully charged again.

To charge the mobile computer using the cradles:

1. Insert the mobile computer into a cradle. See Accessories for accessory setup.

Getting Started

2. The mobile computer starts to charge automatically. The Charge LED Indicator indicates the charge status. See the table below for charging indications.

To charge the mobile computer using the cables:

1. Connect the MC3300x Communication/Charge Cable to the appropriate power source and connect to the mobile computer. See Accessories for accessory setup.

2. The mobile computer starts to charge automatically. The Charge LED Indicator indicates the charge status.

NOTE: To function properly, ensure that the MC3300x hand strap, if attached, does not interfere with the charging contacts when the MC3300x is inserted into a charging cradle or cable.

Charging Indicators

Table 8 LED Charge Indicators

Status Indications

Off • The battery is not charging.

• The battery is not inserted correctly in the

cradle or connected to a power source.

• Cradle is not powered.

Blinking Amber • Active wireless connectivity session during

battery hot swap.

Solid Amber • Battery is charging.

Solid Green • Battery charging is complete.

Fast Blinking Red

2 blinks/second

The MC3300x 7000 mAh PowerPrecision+ extended battery charges from 0% to 90% in less than 5.2 hours at room temperature.

The MC33XX 5200 mAh PowerPrecision+ high capacity battery charges from 0% to 90% in less than 3.8 hours at room temperature.

The MC33XX 2740 mAh PowerPrecision+ standard battery charges from 0% to 90% in less than 2.2 hours at room temperature.

Charging error, e.g.:

• Temperature is too low or too high.

• Charging has gone on too long without

completion (typically eight hours).

Charging Temperature

Charge batteries in ambient temperatures from 0°C to 40°C (32°F to 104°F). To view battery temperature, go to Settings > About phone > Battery information.

The device or cradle always performs battery charging in a safe and intelligent manner. At higher temperatures (for example, approximately +37°C (+98°F)) the device or cradle may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to abnormal temperatures via its LED.

Charging Spare Batteries

See Accessories for information on using accessories to charge spare batteries.

Hot Swap Mode/Backup Power

The device provides a Hot Swap mode where you can replace the battery without powering off the device. When you remove the battery, the display turns off and the device enters the Hot Swap mode. WLAN and Bluetooth connectivity are retained for the first 30 seconds (indicated by a flashing amber LED). After 30 seconds, the device enters a critical suspend mode with RAM data persistence for approximately five minutes. In the critical suspend mode, WLAN and Bluetooth radios are disabled and will only resume if you insert a battery with sufficient charge into the device.

Getting Started

MPORTANT:

is fully depleted. It can take up to 10 minutes to fully charge the supercap. Hot Swap mode will not retain data unless the supercap is fully charged.

The supercap requires time to recharge after performing a Hot Swap or after the main battery

Real-Time Clock Backup

The device provides a Real-time Clock (RTC) backup feature. After boot-up, the device saves the system time in a file in persistent storage. When the device re-boots, it compares the system time to the time saved in a file. If the system time in not the latest, it restores the time from the file.

Getting Started

Replacing the Battery in the MC3300x-G

To replace the battery:

1. Push in the two Battery Release buttons.

The battery ejects slightly. With Hot Swap mode, when the user removes the battery, the display turns off and the device enters low power state. The MC3300x-G supports wireless connectivity persistence for 30 sec (indicated by flashing Amber LEDs), followed by RAM data persistence for approximately five minutes. Replace the battery within five minutes to preserve memory persistence.

2. Remove the battery from the battery compartment.

Getting Started

Align the battery into the battery compartment.

4. Slide the front of the battery into the battery compartment.

5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-G

return to the home position.

6. The device automatically resumes after a battery removal and installation (in a hot swap change). The

only time the Power key needs to be pressed is if the device has been powered off or left for a prolonged duration without a battery pack.

Replacing the Battery in the MC3300x-R/S

To replace the battery:

1. Push in the two Battery Release buttons.

The battery ejects slightly. With Hot Swap mode, when the user removes the battery, the display turns off and the device enters low power state. The MC3300x-R/S supports wireless connectivity persistence for 30 sec (indicated by flashing Amber LEDs), followed by RAM data persistence for approximately five minutes. Replace the battery within five minutes to preserve memory persistence.

Getting Started

Remove the battery from the battery compartment.

Getting Started

Align the battery into the battery compartment.

4. Slide the front of the battery into the battery compartment.

5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-R/S

return to the home position.

6. The device automatically resumes after a battery removal and installation (in a hot swap change). The

only time the Power key needs to be pressed is if the device has been powered off or left for a prolonged duration without a battery pack.

Using the Device





Home Screen

Turn on the device to display the Home screen. Depending on how your system administrator configured your device, your Home screen may appear differently than the graphics in this section.

After a suspend or screen time-out, the Home screen displays with the lock slider. Touch the screen and slide up to unlock.

The Home screen provides four additional screens to place widgets and shortcuts. Swipe the screen left or right to view the additional screens.

NOTE: By default, AOSP devices do not have the same icons on the Home screen as GMS devices. Icons are shown below for example only.

Home screen icons can be configured by the user and may look different than shown.

Figure 8 Home Screen

1 Status Bar Displays the time, status icons (right side), and notification icons (left side).

For more information see Notification Icons on page 38 and Managing

Notifications on page 40.

2 Widgets Launches stand-alone apps that run on the Home screen.

3 Shortcut Icons Opens apps installed on the device.

4 Folder Contains apps.

5 Back Displays the previous screen.

6 Home Displays the Home screen.

7 Recent Displays recently used applications.

Setting Home Screen Rotation

By default, the Home screen rotation is disabled.

1. Touch and hold anywhere on the Home screen until the options appear.

2. Touch Home settings.

3. Touch the Allow Home screen rotation switch.

Using the Device

4. Touch the Home button.

5. Rotate the device.

NOTE: Auto-rotate needs to be enabled in the Quick Access panel or in Settings before the Home Screen

Rotation setting can be used to enable or disable Home Screen Rotation.

Status Bar

The Status bar displays the time, notification icons (left side), and status icons (right side).

If there are more notifications than can fit in the Status bar, a dot displays indicating that more notifications exist. Swipe down from the Status bar to open the Notification panel and view all notifications and status.

Figure 9 Notification and Status Icons

1 Notification Icons. See Notification Icons on page 38.

2 Status Icons. See Status Icons on page 39.

Notification Icons

Notification icons indicate app events and messages.

Table 9 Notification Icons

Icon Description

Main battery is low.

More notifications are available for viewing.

Data is syncing.

Indicates an upcoming event. AOSP devices only.

Indicates an upcoming event. GMS devices only.

Open Wi-Fi network is available.

Audio is playing.

Using the Device

Problem with sign-in or sync has occurred.

Device is uploading data.

Animated: the device is downloading data. Static: the download is complete.

Device is connected to or disconnected from a virtual private network (VPN).

Preparing internal storage by checking it for errors.

USB debugging is enabled on the device.

Wired headset with a boom module is connected to the device.

Wired headset without a boom module is connected to the device.

PTT Express Voice client status. See the PTT Express PTT Notification Icons for a complete list.

Indicates the RxLogger app is running.

Indicates the Bluetooth scanner is connected to the device.

Indicates the ring scanner is connected to the device in HID mode.

Status Icons

Status icons display system information for the device.

Table 10 Status Icons

Icon Description

Using the Device

Alarm is active.

Main battery is fully charged.

Main battery is partially drained.

Main battery charge is low.

Main battery charge is very low.

Main battery is charging.

Indicates that all sounds except media and alarms are muted.

Do Not Disturb mode active.

Airplane Mode is active. All radios are turned off.

Bluetooth is on.

The device is connected to a Bluetooth device.

Connected to a Wi-Fi network. Indicates the Wi-Fi version number.

Not connected to a Wi-Fi network or no Wi-Fi signal.

Connected to an Ethernet network.

Speakerphone enabled.

Indicates that the Orange key is locked.

Indicates that the Blue key is pressed.

Indicates that the Blue key is locked.

Indicates that the ALT key is pressed.

Indicates that the CTRL key is pressed.

Indicates that the Shift key is pressed.

Table 10 Status Icons (Continued)

4XLFN6HWWLQJ%DU

Icon Description

Indicates that the Shift key is locked.

Indicates that the diamond key is pressed.

Indicates that a BT headset is connected to the device.

Managing Notifications

Notification icons report the arrival of new messages, calendar events, alarms, and ongoing events. When a notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons on

page 38 for a list of possible notification icons and their description.

• To view a list of all notifications, open the Notification panel by dragging the Status bar down from the

top of the screen.

Figure 10 Notification Panel

Using the Device

• To respond to a notification, open the Notification panel and then touch a notification. The Notification

panel closes and the corresponding app opens.

• To manage recent or frequently used notifications, open the Notification panel and then touch Manage

notifications. Touch the toggle switch next to an app to turn off all notifications, or touch an app for

more notification options.

• To clear all notifications, open the Notification panel and then touch CLEAR ALL. All event-based

notifications are removed. Ongoing notifications remain in the list.

• To close the Notification panel, swipe the Notification panel up.

Opening the Quick Access Panel

Use the Quick Access panel to access frequently used settings (for example, Airplane mode). To get to the Quick Access Panel:

• If the device is locked, swipe down once.

Using the Device

• If the device is unlocked, swipe down once with two fingers, or twice with one finger.

• If the Notification panel is open, swipe down from the Quick Settings bar.

Figure 11 Quick Access Panel

NOTE: Not all icons are pictured. Icons may vary.

Quick Access Panel Icons

• Display brightness - Use the slider to decrease or increase the brightness of the screen.

• Wi-Fi network - Turn Wi-Fi on or off. To open Wi-Fi settings, touch the Wi-Fi network name.

• Bluetooth settings - Turn Bluetooth on or off. To open Bluetooth settings, touch Bluetooth.

• Battery saver - Turn Battery saver mode on or off. When Battery saver mode is on the performance of

the device is reduced to preserve battery power.

• Invert colors - Invert the display colors.

• Do not disturb - Control how and when to receive notifications.

• Airplane mode - Turn Airplane mode on or off. When Airplane mode is on the device does not connect

to Wi-Fi or Bluetooth.

• Auto-rotate - Lock the device’s orientation in portrait or landscape mode or set to automatically rotate.

• Flashlight - Turn flashlight on or off. Turn camera flash on or off.

• Night Light - Tint the screen amber to make it easier to look at the screen in dim light. Set Night Light to

turn on automatically from sunset to sunrise, or at other times.

• Screen Cast - Share phone content on Chromecast or a television with Chromecast built-in. Touch cast

screen to display a list of devices, then touch a device to begin casting.

• Dark Theme - Toggles dark theme on and off. Dark themes reduce the luminance emitted by the

screen, while meeting minimum color contrast ratios. It helps improve visual ergonomics by reducing eye strain, adjusting brightness to current lighting conditions, and facilitating screen use in dark environments, while conserving battery power.

• Focus mode - Turn on to pause distracting apps. To open Focus mode settings, touch and hold.

• Bedtime mode - Turn grayscale on and off. Grayscale turns the screen black and white, reducing phone

distractions and improving battery life.

Using the Device

• Nearby Share - Helps find and interact with services and devices close to the device. To open Nearby

Share settings, touch and hold.

• Screen Record - Turn on to record your phone screen. Tap the toggle switches to record audio or show

touches on the screen.

Editing Icons on the Quick Settings Bar

The first several setting tiles from the Quick Access panel become the Quick Settings bar.

Open the Quick Access panel and touch to edit, add, or remove settings tiles.

Battery Management

Observe the recommended battery optimization tips for your device.

• Set the screen to turn off after a short period of non-use.

• Reduce screen brightness.

• Turn off all wireless radios when not in use.

• Turn off automatic syncing for Email, Calendar, Contacts, and other apps.

• Minimize use of apps that keep the device from suspending, for example, music and video apps.

NOTE: Before checking the battery charge level, remove the device from any AC power source (cradle or

cable).

Checking Battery Status

IMPORTANT: At temperatures below 0°C, the Battery level may report a reduced value. This is normal

due to temperature compensation.

• Open Settings and touch About phone > Battery Information.

Or, swipe up from the bottom of the screen and touch to open the Battery Manager app. See

Battery Manager on page 57.

• Battery present status indicates if the battery is present.

• Battery level lists the battery charge (as a percentage of fully charged).

• Swipe down with two fingers from the status bar to open the quick access panel.

• Battery percentage is displayed next to the battery icon.

Monitoring Battery Usage

The Battery screen provides battery charge details and power management options to extend battery life.

1. Go to Settings.

2. Touch Battery.

Display battery information and power management options for a specific app.

1. Go to Settings.

2. Touch Apps & notifications.

3. Touch an app.

Using the Device

Touch Advanced > Battery.

Different apps display different information. Some apps include buttons that open screens with settings to adjust power use. Use the DISABLE or FORCE CLOSE buttons to turn off apps that consume too much power.

Low Battery Notification

When the battery charge level drops below 15%, the device displays a notice to connect the device to power. The user should charge the battery using one of the charging accessories.

When the battery charge drops below 8%, the device displays a notice to connect the device to power. The user must charge the battery using one of the charging accessories.

When the battery charge drops below 6%, the device turns off. The user must charge the battery using one of the charging accessories.

Interactive Sensor Technology

The device contains sensors that monitor movement and orientation.

• Gyroscope - Measures angular rotational velocity to detect rotation of the device.

• Accelerometer - Measures the linear acceleration of movement to detect the orientation of the device.

In order to take advantage of these sensors, applications use API commands. Refer to the Google Android Sensor APIs for more information. For information on the Zebra Android EMDK, go to:

techdocs.zebra.com

Waking the Device

The device goes into Suspend mode when you press the Power button or after a period of inactivity (set in the Display settings window).

1. To wake the device from Suspend mode, press the Power button.

The Lock screen displays.

2. Swipe the screen up to unlock.

• If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock

screen.

• If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.

NOTE: If you enter the PIN, password, or pattern incorrectly five times, you must wait 30 seconds before trying again.

If you forget the PIN, password, or pattern contact your system administrator.

USB Communication

Connect the device to a host computer to transfer files between the device and the host computer.

When connecting the device to a host computer, follow the host computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting files.

Transferring Files

Use Transfer files to copy files between the device and the host computer.

1. Connect the device to a host computer using a USB accessory.

2. On the device, pull down the Notification panel and touch Charging this device via USB.

By default, No data transfer is selected.

3. Touch File Transfer.

4. On the host computer, open a file explorer application.

5. Locate the device as a portable device.

6. Open the SD card or the Internal storage folder.

7. Copy files to and from the device or delete files as required.

Transferring Photos

Use PTP to copy photos from the device to the host computer.

1. Connect the device to a host computer using a USB accessory.

Using the Device

2. On the device, pull down the Notification panel and touch Charging this device via USB.

3. Touch PTP.

4. On the host computer, open a file explorer application.

5. Open the SD card or the Internal storage folder.

6. Copy or delete photos as required.

Disconnect from the Host Computer

CAUTION: Carefully follow the host computer’s instructions to unmount the microSD card and disconnect

USB devices correctly to avoid losing information.

To disconnect the device from the host computer:

1. On the host computer, unmount the device.

2. Remove the device from the USB accessory.

Settings

Accessing Settings

There are multiple ways to access settings on a device.

• Swipe down with two fingers from the top of the Home screen to open the Quick Access panel and touch .

• Double-swipe down from the top of the Home screen to open the Quick Access panel and touch .

• Swipe up from the bottom of the Home screen to open APPS and touch Settings.

Display Settings

Use Display settings to change the screen brightness, enable night light, change the background image, enable screen rotation, set sleep time, and change font size.

Setting the Screen Brightness Manually

Manually set the screen brightness using the touchscreen.

1. Swipe down with two fingers from the Status bar to open the Quick Access panel.

2. Slide the icon to adjust the screen brightness level.

Setting Night Light

The Night Light setting tints the screen amber, making the screen easier to look at in low light.

1. Go to Settings.

2. Touch Display.

3. Touch Night Light.

4. Touch Schedule.

5. Select one of the schedule values:

• None (default)

• Turns on at custom time

• Turns on from sunset to sunrise.

6. By default, Night Light is disabled. Touch TURN ON NOW to enable.

7. Adjust the tint using the Intensity slider.

Touch the Home button.

Setting Screen Rotation

By default, screen rotation is enabled.

1. Go to Settings.

2. Touch Display > Advanced.

3. Touch Auto-rotate screen.

NOTE: To change the Home screen rotation, see Setting Home Screen Rotation on page 37.

4. Touch the Home button.

Setting Screen Timeout

Set the screen sleep time.

1. Go to Settings.

Settings

2. Touch Display > Screen timeout.

3. Select one of the sleep values.

• 15 seconds

• 30 seconds

• 1 minute

• 2 minutes

• 5 minutes

• 10 minutes

• 30 minutes (default)

• Never

4. Touch the Home button.

Setting Font Size

Set the size of the font in system apps.

1. Go to Settings.

2. Touch Display > Advanced.

3. Touch Font size.

4. Select one of the font size values.

• Small

• Default

• Large

• Largest.

5. Touch the Home button.

Touch Panel Mode

The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.

NOTE: A glove can be made of medical latex, leather, cotton, or wool. For optimal performance use a Zebra certified stylus.

1. Go to Settings.

2. Touch Display > Advanced.

3. Touch TouchPanelUI.

4. Select:

• Stylus and Finger (Screen Protector OFF) to use a finger or a stylus on the screen without a screen

protector.

• Glove and Finger (Screen Protector OFF) to use a finger or a gloved finger on the screen without a screen protector.

5. Touch the Home button.

Setting the Date and Time

Settings

You are only required to set the time zone or set the date and time if the wireless LAN does not support Network Time Protocol (NTP)

1. Go to Settings.

2. Touch System > Date & time.

3. Touch Use network-provided time to disable automatic date and time synchronization.

4. Touch Date.

5. In the calendar, set today’s date.

6. Touch OK.

7. Touch Time.

8. Touch the green circle, drag to the current hour and then release.

9. Touch the green circle, drag to the current minute and then release.

10. Touch AM or PM.

11. Touch OK.

12. Touch Time zone > Time zone and select the current time zone from the list. This option may not be

available in some locations.

13. Touch Time zone > Region and select the current region from the list.

14. Touch Update Interval to select interval to synchronize the system time from the network.

15. In TIME FORMAT, choose either Use local default or Use 24-hour format.

16. Touch the Home button.

General Sound Setting

Use the Sound settings to configure media and alarm volumes.

Go to Settings.

2. Touch Sound.

3. Touch an option to set sounds.

Sound Options

* NOTE: The device does not support haptic feedback, so it will not vibrate.

• Media volume - Controls the music, games, and media volume.

• Alarm volume - Controls the alarm clock volume.

• Notification volume - Controls the notification volume.

• Do Not Disturb - Mutes some or all sounds and vibrations.

• Media - Enable or disable to show media controls in Quick Access Panel.

• * Shortcut to prevent ringing - Select how the shortcut method prevents ringing.

• Default notification sound - Select a sound to play for all system notifications.

• Default alarm sound - Select a sound to play for alarms.

Settings

• Other sounds and vibrations

• Screen locking sounds - Play a sound when locking and unlocking the screen (default – enabled).

• * Charging sounds - Plays a sound when power is applied to the device (default - enabled).

• Touch sounds - Play a sound when making screen selections (default – enabled).

Setting Wake-Up Sources

By default the device wakes from suspend mode when the user presses the Power button or Gun Trigger on the MC3300x-G or the Power button or Center Scan key on the MC3300x-S or MC3300x-R.

NOTE: There is no dedicated PTT key on the MC3300x. Any physical key or trigger can be programmed as the

PTT key including either of the Programmable P1 or Diamond keys.

1. Go to Settings.

2. Touch Wake-Up Sources.

• GUN_TRIGGER - Programmable button on the Trigger Handle accessory.

• LEFT_TRIGGER_1 - Left scan button.

• RIGHT_TRIGGER_1 - Right scan button.

• SCAN - Left scan button.

3. Touch a checkbox. A check appears in the checkbox.

4. Touch the Home button.

Remapping a Button

Buttons on the device can be programmed to perform different functions or as shortcuts to installed apps. For a list of key names and descriptions, refer to: techdocs.zebra.com

Settings

NOTE: It is not recommended to remap the scan button.

1. Go to Settings.

2. Touch Key Programmer. A list of programmable buttons displays.

3. Select the button to remap.

4. Touch the Shortcut, the Keys and Buttons, or the Trigger tab that lists the available functions,

applications, and triggers.

5. Touch a function or application shortcut to map to the button.

NOTE: If you select an application shortcut, the application icon appears next to the button on the Key

Programmer screen.

6. Touch the Home button.

Remappable Keys

Figure 12 Key Positions

LEFT_TRIGGER_1

RIGHT_TRIGGER_1

DIAMOND

SCAN

GRIP_TRIGGER

UI Listed Keys

• GRIP_TRIGGER

• SCAN

• P1

• DIAMOND

• LEFT_TRIGGER_1

• RIGHT_TRIGGER_1

Other Remappable Keys

• 0-9

• A-Z

• F1-F10

• LEFT

• UP

Settings

• DOWN

• RIGHT

• ENTER

• SPACE

• ESC

• DOT (via XML only, not StageNow)

• TAB

• DELETE

• COMMA

• SHIFT

• CTRL

• ALT

• BLUE

• ORANGE

Non-Remappable Keys

• POWER

• BACK (Not a physical key)

• HOME (Not a physical key)

• RECENT (Not a physical key)

Keyboards

The device provides multiple keyboard options.

• Android Keyboard - AOSP devices only

• Gboard - GMS devices only

• Enterprise Keyboard- Not pre-installed on the device. Contact Zebra Support for more information.

NOTE: By default the Enterprise and Virtual Keyboards are disabled.

Keyboard Configuration

Enabling Keyboards

1. Go to Settings.

2. Touch System > Languages & input > Virtual keyboard > Manage keyboards.

3. Touch a keyboard to enable.

Settings

Switching Between Keyboards

• To switch between keyboards, touch in a text box to display the current keyboard.

• On the Gboard keyboard, touch and hold (GMS devices only).

• On the Android keyboard, touch and hold (AOSP devices only).

• On the Enterprise keyboard, touch . Only available with Mobility DNA Enterprise License. Not

pre-installed on the device. Contact Zebra Support for more information.

Using the Android and Gboard Keyboards

Use the Android or Gboard keyboards to enter text in a text field.

To configure the keyboard settings, touch and hold

Edit Text

Edit entered text and use menu commands to cut, copy, and paste text within or across apps. Some apps do not support editing some or all of the text they display; others may offer their own way to select text.

Entering Numbers, Symbols, and Special Characters

1. Enter numbers and symbols.

• Touch and hold one of the top-row keys until a menu appears then select a number or special character.

the comma and then slide your finger to .

• Touch the Shift key once for a single capital letter. Touch the Shift key twice to lock in uppercase. Touch the Shift key a third time to unlock Capslock.

• Touch

• Touch the

2. Enter special characters.

?123 to switch to the numbers and symbols keyboard.

=\< key on the numbers and symbols keyboard to view additional symbols.

• Touch and hold a number or symbol key to open a menu of additional symbols. A larger version of the key displays briefly over the keyboard.

Using the Enterprise Keyboard

The Enterprise Keyboard contains multiple keyboard types.

• Numeric

• Alpha

• Special characters

• Data capture.

Numeric Tab

The numeric keyboard is labeled 123. The keys displayed vary on the app being used. For example, an arrow displays in Contacts, however Done displays in Email account setup.

Alpha Tab

The alpha keyboard is labeled using the language code. For English, the alpha keyboard is labeled EN.

Settings

Additional Character Tab

The additional characters keyboard is labeled #*/.

Touch to enter emoji icons in a text message.

Touch ABC to return to the Symbols keyboard.

Scan Tab

The Scan tab provides an easy data capture feature for scanning barcodes.

Language Usage

Use the Language & input settings to change the device’s language, including words added to the dictionary.

Changing the Language Setting

1. Go to Settings.

2. Touch System > Languages & input.

3. Touch Languages. A list of available languages displays.

4. If the desired language is not listed, touch Add a language and select a language from the list.

5. Touch and hold to the right of the desired language, then drag it to the top of the list.

6. The operating system text changes to the selected language.

Adding Words to the Dictionary

1. Go to Settings.

2. Touch System > Languages & input > Advanced > Personal dictionary.

If prompted, select the language where this word or phase is stored.

4. Touch + to add a new word or phrase to the dictionary.

5. Enter the word or phrase.

6. In the Shortcut text box, enter a shortcut for the word or phrase.

7. Touch the Home button.

Notifications

Setting App Notifications

To set notification settings for a specific app:

1. Go to Settings.

2. Touch Apps & notifications.

3. Under Recently opened apps, touch SEE ALL XX APPS. The App info screen displays.

If there are no recently opened apps, touch App info to open the App Info screen.

Settings

4. Select an app. Options vary depending on the app selected.

5. Select an available option:

• Open - Opens the app.

• Disable - Turn the app off and hide it. The app no longer appears in the All Apps list. You must re-enable

the app to use it.

• Force Stop - Turn off the app.

• Notifications

• All app notifications - Select to turn all notifications from this app on (default) or off.

Touch a specific notification category to display additional options.

• Default - Allow notifications from this app to make sound.

• Silent - Do not allow notifications from this app to make sound.

• Minimize - In the Notification panel, collapse notifications to one line.

• Advanced - Touch for additional options.

• Allow notification dot - Do not allow this app to add a notification dot to the app icon.

• Additional settings in the app - Open the app settings.

• Permissions - Configure which permissions are allowed or denied for this app.

• Storage & cache - View the amount of storage and cache space used for this app. You can choose to Clear Storage and Clear Cache for the app to free up storage space on the device.

• Mobile data & Wi-Fi - View the data usage for this app. You can choose to enable Background data usage or allow Unrestricted data usage by this app.

• Advanced - Touch for additional options.

• Screen time - Touch for options to set an App timer that limits the amount of time you can use this app and to Manage notifications.

• Battery - Set Background restriction and Battery optimization for this app.

Settings

• Open by default - Modify which links or files the app opens by default.

• Advanced

• Picture-in-picture - Allow this app to create a picture-in-picture window when the app is running in the

background.

• Install unknown apps - Allow this app to install unknown apps.

• Display over other apps - Allow this app to display over other apps.

• Modify system settings - Allow this app to modify system settings.

• Store

• App details - Opens Google Play to display information about the app.

Viewing Notification Settings for All Apps

To view the notification settings for all apps:

1. Go to Settings.

2. Touch Apps & Notifications.

3. Scroll down to Notifications to view how many apps have notifications turned off.

4. To set or view notifications settings for a specific app, see Setting App Notifications on page 53.

Controlling Lock Screen Notifications

To control whether notifications can be seen when the device is locked:

1. Go to Settings.

2. Touch Apps & notifications > Notifications.

3. Touch Notifications on lockscreen and select one of the following:

• Show conversations, default, and silent (default)

• Hide silent conversations and notifications

• Don't show any notifications.

Blink Light

The Notification LED lights blue when an app, such as email and VoIP, generates a programmable notification or to indicate when the device is connected to a Bluetooth device. By default, LED notifications are enabled.

To change the notification setting:

1. Go to Settings.

2. Touch Apps & notifications > Notifications > Advanced.

3. Touch Blink light to toggle the notification on or off.

Applications

The APPS screen displays icons for all installed apps. See Application Deployment for information on installing and uninstalling apps. For information on standard Android apps, go to Google Play

The following table describes the apps installed on the device.

NOTE: Not all apps are available on all devices.

Table 1 Apps

Icon Description

Battery Manager - Displays battery information, including charge level, status, health and

wear level.

Bluetooth Pairing Utility – Use to pair a Zebra Bluetooth scanner with the device by scanning a barcode.

Camera - Take photos or record videos. For more information, see Camera on page 60.

DataWedge - Enables data capture using the imager. For more information, see DataWedge

Demonstration on page 63.

DisplayLink Presenter - Use to present the device screen onto a connected monitor.

DWDemo - Provides a way to demonstrate the data capture features using the imager. For

more information, see DataWedge Demonstration on page 63.

License Manager - Use to manage software licenses on the device.

PTT Express - Use to launch PTT Express client for VoIP communication.

RxLogger - Use to diagnose device and app issues. For more information, see RxLogger on

page 69.

Applications

Table 1 Apps (Continued)

Icon Description

Settings - Use to configure the device.

StageNow - Allows the device to stage a device for initial use by initiating the deployment of

settings, firmware, and software.

Velocity - Opens the Ivanti (formerly Wavelink) terminal emulation app.

VoD - The Video on Device basic app provides a how-to video for proper device cleaning.

For Video on Device licensing information, go to learning.zebra.com

Worry Free Wifi Analyzer - A diagnostic intelligent app. Use to diagnose surrounding area and display network stats, such as coverage hole detection, or AP in vicinity. Refer to the Worry Free Wi-Fi Analyzer Administrator Guide for Android.

Zebra Bluetooth Settings - Use to configure Bluetooth logging.

Zebra Data Services - Use to enable or disable Zebra Data Services. Some options are set

by the system administrator.

Accessing Apps

All apps installed on the device are accessed using the APPS window.

1. On the Home screen, swipe up from the bottom of the screen.

2. Slide the APPS window up or down to view more app icons.

3. Touch an icon to open the app.

Switching Between Recent Apps

Use the Recent button to switch between recently used apps.

1. Touch Recent button.

A window appears on the screen with icons of recently used apps.

2. Slide the apps displayed up and down to view all recently used apps.

3. Swipe left or right to remove app from the list and force close the app.

4. Touch an icon to open an app or touch Back button to return to the current screen.

Battery Manager

The Battery Manager provides detailed information about the battery and battery swap procedures on supported devices.

Opening Battery Manager

To open the Battery Manager app, swipe up from the bottom of the Home screen, and then touch .

Battery Manager Information Tab

The Battery Manager displays detailed information about battery charging, health, and status.

Table 2 Battery Icon Description

Battery Icon Description

Battery charge level is between 85% and 100%.

Battery charge level is between 19% and 84%.

Battery charge level is between 0% and 18%.

Applications

• Level - The current battery charge level as a percentage. Displays -% when level is unknown.

• Wear - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color

changes to red.

• Health - The health of the battery. If a critical error occurs, appears. Touch to view the error description.

• Decommission - The battery is past its useful life and should be replaced. See system

administrator.

• Good - The battery is good.

• Charge error - An error occurred while charging. See system administrator.

• Over Current - An over-current condition occurred. See system administrator.

• Dead - The battery has no charge. Replace the battery.

• Over Voltage - An over-voltage condition occurred. See system administrator.

• Below Temperature - The battery temperature is below the operating temperature. See system

administrator.

• Failure Detected - A failure has been detected in the battery. See system administrator.

• Unknown - See system administrator.

• Charge Status

• Not charging - The device is not connected to AC power.

• Charging-AC - The device is connected to AC power and charging.

• Charging-USB - The device is connected to a host computer with a USB cable and charging.

• Discharging - The battery is discharging.

• Full - That the battery is fully charged.

Applications

• Unknown - The battery status is unknown.

• Time until empty - The amount of time until the battery is empty.

• Advanced info - Touch to view additional battery information.

• Battery present status - Indicates that the battery is present.

• Battery level - The battery charge level as a percentage of scale.

• Battery scale - The battery scale level used to determine battery level (100).

• Battery voltage - The current battery voltage in millivolts.

• Battery temperature - The current battery temperature in degrees Centigrade.

• Battery technology - The type of battery.

• Battery current - The average current into or out of the battery over the last second in mAh.

• Battery manufacture date - The date of manufacture.

• Battery serial number - The battery serial number. The number matches the serial number printed

on the battery label.

• Battery part number - The battery part number.

• Battery decommission status - Indicates if the battery is past its life span.

• Battery Good - The battery is in good health.

• Decommissioned Battery - The battery is past its useful life and should be replaced.

• Base cumulative charge - Cumulative charge using Zebra charging equipment only.

• Battery present capacity - Maximum amount of charge that could be pulled from the battery under

the present discharge conditions if the battery were fully charged.

• Battery health percentage - With a range from 0 to 100, this is the ratio of “present_capacity” to

“design_capacity” at a discharge rate of “design_capacity”.

• % decommission threshold - The default % decommission threshold for a gifted battery as 80%.

• Battery present charge - Amount of usable charge remaining in the battery at present under the

current discharge conditions.

• Battery total cumulative charge - The total accumulated charge in all chargers.

• Battery time since first use - The time passed since the battery was placed in a Zebra terminal for

the first time.

• Battery error status - The error status of the battery.

• App version - The application version number.

Camera











Taking Photos

Applications

NOTE: The Camera app is only available on MC3300x-S/R configurations.

NOTE: The device saves photos and videos on the microSD card, if installed and the storage path is

changed manually. By default, or if a microSD card is not installed, the device saves photos and videos on the internal storage.

NOTE: It is recommended to install a microSD card in devices with 2 GB RAM / 16 GB Flash due to limited internal storage.

On camera only devices without an internal scan engine, the back camera is used for barcode scanning.

This section provides information for taking photos and recording videos using the integrated digital cameras.

NOTE: See Camera Settings on page 62 for camera setting descriptions.

1 Scene Mode and Settings

2 Filters

3 Flash

4 Video Recording Button

5 Camera Shutter Button

6 Gallery

Swipe up from the bottom of the Home screen and touch Camera.

2. If necessary, touch the Camera Mode icon and touch .

3. Frame the subject on the screen.

4. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls

appear on the screen.

5. Touch an area on the screen to focus. The focus circle appears. The two bars turn green when in focus.

6. Touch .

The camera takes a photo and a shutter sound plays.

The photo momentarily displays as a thumbnail in the lower left corner.

Recording Videos

Applications

1. Swipe up from the bottom of the Home screen and touch Camera.

2. Touch the camera mode menu and touch .

Audio

Flash

Take Photo

Stop Recording

Gallery

Pause Recording

Shutter Button

Point the camera and frame the scene.

4. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls

appear on the screen.

5. Touch to start recording.

The video time remaining appears in the top left of the screen.

6. Touch to end the recording.

The video momentarily displays as a thumbnail in the lower left corner.

Camera Settings

In Photo mode, photo settings appear on screen. Touch ••• > to display the photo settings options.

• General - These settings apply to both the still camera and video camera.

• Face Detection - Select to turn face detection Off (default) or On.

• Storage – Set the location to store the photo to: Phone or SD Card.

• Still Camera - These settings apply only to the still camera.

• Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.

Applications

• Continuous Shot - Select to take a series of photos quickly while holding the capture button. Off

(default) or On.

• Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M

pixels, HD1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.

• Picture quality - Set the picture quality setting to: Low, Standard, or High (default).

• Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.

• Exposure - Set the exposure settings to: -2, -1, 0 (default), +1, +2.

• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most

natural-looking colors:

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Shutter Sound - Select to play a shutter sound when taking a photo. Options: Disable or Enable

(default).

• AF Animation - Select to enable or disable the camera focus ring in the camera preview. Options:

Disable (default) or Enable.

• Picture Format - All still images are saved in JPEG format.

• Video Camera - These settings apply only to the video camera.

• Video quality - Set video quality to: HD 1080p (default), HD 720p, SD 480p, CIF, or QVGA.

• Video duration - Set to: 30 seconds (MMS), 10 minutes, 30 minutes (default), or no limit.

• Image Stabilization - Set to reduce blurry videos due to device movement. Options: On or Off

(default).

• Noise Reduction - Off (default), Fast, High Quality

• Video Encoder - Set the video encoder to: MPEG4, H264 (default), H265.

• Audio Encoder - Set the audio encoder to: AMRNB, or AAC (default).

• Video Rotation - Set the rotation of the video to: 0 (default), 90, 180, or 270.

• Time Lapse - Set the time lapse interval to: Off (default), or a time between 0.5 seconds and 24

hours.

• System

• Restore default - Select to restore all settings to the default values.

• Version Info - Displays the software version of the camera app.

DataWedge Demonstration

Use DataWedge Demonstration (DWDemo) to demonstrate data capture functionality. To configure DataWedge, refer to techdocs.zebra.com/datawedge/

NOTE: DataWedge is enabled on the Home screen. To disable this feature, go to the DataWedge settings and disable the Launcher profile.

Applications

Table 3 DataWedge Demonstration Icons

Icon Description

Illumination Imager illumination is on. Touch to turn illumination off.

Imager illumination is off. Touch to turn illumination on.

Data Capture The data capture function is through the internal imager.

An RS507 or RS6000 Bluetooth imager is connected.

An RS507 or RS6000 Bluetooth imager is not connected.

The data capture function is through the rear camera. Only available on MC3300x-S/R devices configured with the camera option.

Scan Mode Imager is in picklist mode. Touch to change to normal scan mode.

Imager is in normal scan mode. Touch to change to picklist mode.

Menu Opens a menu to view the application information or to set the

Scanner Selection

To select a scanner, touch > Settings > Scanner selection.

application DataWedge profile.

Applications

See the Data Capture section for more information.

Press the programmable button or touch the yellow scan button to capture data. The data appears in the text field below the yellow button.

PTT Express Voice Client

NOTE: Requires a PTT Express License.

PTT Express Voice Client enables Push-To-Talk (PTT) communication between disparate enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers simple PTT communication without requiring a voice communication server.

• Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.

• Private Response: Double-press the PTT button to respond to the originator of the last broadcast or to

make a Private Response.

PTT Express User Interface

Figure 1 PTT Express Default User Interface

Notification Icon

Applications

Settings

Service Indication

Talk Group

Enable/Disable Switch

PTT Audible Indicator

Table 4 PTT Express Default User Interface Descriptions

Item Description

Notification Icon Indicates the current state of the PTT Express client.

Service Indication Indicates the status of the PTT Express client. Options: Service

Talk Groups Lists all 32 Talk Groups available for PTT communication.

Settings Opens the PTT Express Settings screen.

Enable/Disable Switch

The following tones provide helpful cues when using the voice client.

• Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for you to start talking.

• Access Tone: Single beep. Plays when another user just finished a broadcast or response. You can now initiate a Group Broadcast or Private Response.

Applications

Enabled, Service Disabled or Service Unavailable.

Turns the PTT service on and off.

• Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds).

• Network Tone:

• Three increasing pitch beeps. Plays when PTT Express acquires the WLAN connection and the

service is enabled.

• Three decreasing pitch beeps. Plays when PTT Express loses the WLAN connection or the service

is disabled.

PTT Notification Icons

Notification icons indicate the current state of the PTT Express Voice client.

Table 5 PTT Express Icon Descriptions

Status Icon Description

The PTT Express Voice client is disabled.

The PTT Express Voice client is enabled but not connected to a WLAN.

The PTT Express Voice client is enabled, connected to a WLAN, and listening on the Talk Group indicated by the number next to the icon.

The PTT Express Voice client is enabled, connected to a WLAN, and communicating on the Talk Group indicated by the number next to the icon.

Table 5 PTT Express Icon Descriptions (Continued)

Status Icon Description

The PTT Express Voice client is enabled, connected to a WLAN, and in a private response.

The PTT Express Voice client is enabled and muted.

The PTT Express Voice client is enabled but it is not able to communicate due to a VoIP telephony call in progress.

Enabling PTT Communication

1. Swipe up from the bottom of the Home screen and touch .

2. Slide the Enable/Disable Switch to the ON position. The button changes to ON.

Selecting a Talk Group

Applications

One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be enabled at a time on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.

PTT Communication

NOTE: This section describes the default PTT Express client configuration. Refer to the PTT Express V1.2

User Guide for detailed information on using the client.

In order to use a PTT Key with PTT Express, remap BUTTON_L2 key to any available physical key, such as LEFT_TRIGGER_1, RIGHT_TRIGGER_1, SCAN, P1 or DIAMOND. By default, a PTT button is not assigned. For information on how to remap a key, refer to the Settings chapter.

PTT communication may be established as a Group Call.

Creating a Group Call

1. Press and hold the PTT button (or the Talk button on the headset) and listen for the talk tone.

If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure that PTT Express and the WLAN are enabled.

2. Start talking after hearing the talk tone.

NOTE: Holding the button for more than 60 seconds (default) drops the call, allowing others to make

Group calls. Release the button when finished talking to allow others to make calls.

Responding with a Private Response

The Private Response can only be initiated once a Group Call has been established. The initial Private Response is made to the originator of the Group Call.

1. Wait for an access tone.

2. Within 10 seconds, double-press the PTT button, and listen for the talk tone.

3. If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure

that PTT Express and the WLAN are enabled.

Start talking after the talk tone plays.

5. Release the button when finished talking.

Disabling PTT Communication

1. Swipe up from the bottom of the Home screen and touch .

2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF.

3. Touch the Home button.

Applications

RxLogger

RxLogger is a comprehensive diagnostic tool that provides application and system metrics, and diagnoses device and application issues. RxLogger logs the following information: CPU load, memory load, memory snapshots, battery consumption, power states, wireless logging, cellular logging, TCP dumps, Bluetooth logging, GPS logging, logcat, FTP push/pull, ANR dumps, etc. All generated logs and files are saved onto flash storage on the device (internal or external).

RxLogger Configuration

RxLogger is built with an extensible plug-in architecture and comes packaged with a number of plug-ins already built-in. For information on configuring RxLogger, refer to techdocs.zebra.com/rxlogger/

To open the configuration screen, from the RxLogger home screen touch Settings.

Configuration File

RxLogger configuration can be set using an XML file. The config.xml configuration file is located on the microSD card in the connection. Edit the configuration file and then replace the XML file on the device. There is no need to stop

and restart the RxLogger service since the file change is automatically detected.

Applications

RxLogger\config folder. Copy the file from the device to a host computer using a USB

Enabling Logging

To enable logging:

1. Swipe the screen up and select .

2. Touch Start.

3. Touch the Home button.

Disabling Logging

To disable logging:

1. Swipe the screen up and select .

2. Touch Stop.

3. Touch the Home button.

Extracting Log Files

1. Connect the device to a host computer using an USB connection.

2. Using a file explorer, navigate to the RxLogger folder.

3. Copy the file from the device to the host computer.

4. Disconnect the device from the host computer.

Backing Up

RxLogger Utility allows the user to make a zip file of the RxLogger folder in the device, which by default contains all the RxLogger logs stored in the device.

To save the backup data, touch > BackupNow.

RxLogger Utility

RxLogger Utility is a data monitoring application for viewing logs in the device while RxLogger is running. Logs and RxLogger Utility features are accessed using Main Chat Head.

Initiating the Main Chat Head

To initiate the Main Chat Head:

1. Open RxLogger.

2. Touch > Toggle Chat Head. The Main Chat Head icon appears on the screen.

3. Touch and drag the Main Chat head icon to move it around the screen.

Removing the Main Chat Head

To remove the Main Chat Head icon:

1. Touch and drag the icon. A circle with an X appears.

Applications

2. Move the icon over the circle and then release.

Viewing Logs

To view logs:

1. Touch the Main Chat Head icon. The RxLogger Utility screen appears.

2. Touch a log to open it. The user can open many logs with each displaying a new sub Chat Head.

3. If necessary, scroll left or right to view additional Sub Chat Head icons.

4. Touch a Sub Chat Head to display the log contents.

Removing a Sub Chat Head Icon

To remove a sub chat Head icon, press and hold the icon until it disappears.

Backing Up In Overlay View

RxLogger Utility allows the user to make a zip file of the RxLogger folder in the device, which by default contains all the RxLogger logs stored in the device.

The Backup icon is always available in Overlay View.

1. Touch . The Backup dialog box appears.

2. Touch Yes to create the back up.

Data Capture

The device supports data capture using:

• Internal Laser Scanner (SE965 1D)

• Imager (SE4720 1D/2D, SE4770 1D/2D, and SE4850-ER 1D/2D)

• RS5100 Bluetooth Ring Scanner

• RS6000 Bluetooth Ring Scanner

• RS507/RS507X Bluetooth Hands-free imager

• DS2278 Digital Barcode Scanner

• DS3678 Digital Barcode Scanner

• LI3678 Linear Scanner.

Laser Scanning

The device with a laser scanner has the following features:

• Reading of a variety of barcode symbologies, including the most popular linear, postal, and 1D code types.

• Intuitive laser aiming for easy point-and-shoot operation.

Imaging

The device with an integrated 2D imager has the following features:

• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear, postal, PDF417, Digimarc, and 2D matrix code types.

• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.

The imager uses imaging technology to take a picture of a barcode, stores the resulting image in memory, and executes state-of-the-art software decoding algorithms to extract the barcode data from the image.

Operational Modes

The device with an integrated imager supports two modes of operation, listed below. Activate each mode by pressing the Scan button.

• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view. The imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.

Data Capture

NOTE: To enable Pick List Mode, configure in DataWedge or set in an application using a API command.

• Pick List mode - Selectively decode a barcode when more than one barcode is in the device’s field of

view by moving the aiming crosshair or dot over the required barcode. Use this feature for pick lists containing multiple barcodes and manufacturing or transport labels containing more than one barcode type (either 1D or 2D).

NOTE: To enable Basic MultiBarcode Mode, configure in DataWedge or set in an application using a API command.

• Basic MultiBarcode Mode: In this mode, the device attempts to locate and decode a specific number of unique barcodes within its field of view. The device remains in this mode as long as the user holds the scan button, or until it decodes all the barcodes. Available on integrated SE4720, SE4770, or SE4850 imagers only.

• The device attempts to scan the programmed number of unique barcodes (from 2 through 100).

• If there are duplicate barcodes (same symbology type and data), only one of the duplicate barcodes

is decoded and the remainder are ignored. If the label has two duplicate barcodes plus another two different barcodes, a maximum of three barcodes will be decoded from that label; one will be ignored as a duplicate.

• Barcodes can be of multiple symbology types and still be acquired together. For example, if the

specified quantity for a Basic MultiBarcode scan is four, two barcodes can be symbology type Code 128 and the other two can be symbology type Code 39.

• If the specified number of unique barcodes is not initially in view of the device, the device will not

decode any data until the device is moved to capture the additional barcode(s) or time out occurs. If the device field of view contains a number of barcodes greater than the specified quantity, the device randomly decodes barcode(s) until the specified number of unique barcodes is reached. For example, if the count is set to two and eight barcodes are in the field of view, the device decodes the first two unique barcodes it sees, returning the data in random order.

• Basic MultiBarcode Mode does not support concatenated barcodes.

Scanning Considerations

Typically, scanning is a simple matter of aim, scan, and decode, with a few quick trial efforts to master it. However, consider the following to optimize scanning performance:

• Range: Scanners decode best over a particular working range — minimum and maximum distances from the barcode. This range varies according to barcode density and scanning device optics. Scan within range for quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner closer and further away to find the right working range for the barcodes being scanned.

• Angle: Scanning angle is important for quick decodes. When the illumination/flash reflects directly back into the imager, the specular reflection can blind/saturate the imager. To avoid this, scan the barcode so that the beam does not bounce directly back. Do not scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to work within.

• Hold the device farther away for larger symbols.

• Move the device closer for symbols with bars that are close together.

NOTE: Scanning procedures depend on the app and device configuration. An app may use different scanning procedures from the one listed above.

Scanning with Internal Imager

To capture barcode data:

1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).

2. Point the top of the device at a barcode.

Figure 2 Barcode Scanning – MC3300x–G

Data Capture

Figure 3 Barcode Scanning – MC3300x–S

3. Press and hold the Scan button or Trigger.

The red laser aiming pattern turns on to assist in aiming.

4. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is

used for increased visibility in bright lighting conditions.

The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded successfully. Note that when the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.

Figure 4 Aiming Pattern: Standard and Extended Range

Figure 5 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range

5. Release the scan button or Trigger.

6. The barcode content data appears in the text field.

Scanning with Laser Scanner

To capture barcode data:

1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).

2. Point the top of the device at a barcode.

3. On the MC3300x–R, rotate the Turret for optimal scanning position.

4. Point the scan exit window at a barcode.

Data Capture

Figure 6 Barcode Scanning – MC3300x-G

5. Press and hold the Scan button.

The red scan line turns on to assist in aiming. Ensure that the scan line crosses every bar and space of the barcode.

The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded successfully.

Figure 7 Linear Scanner Aiming Pattern

6. Release the scan button.

7. The captured data appears in the text field.

Scanning with RS5100 Ring Scanner

Use the RS5100 Ring Scanner to capture barcode data.

Data Capture

Figure 8 RS5100 Ring Scanner

Refer to the RS5100 Ring Scanner Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the RS5100:

1. Pair the RS5100 with the device. See Pairing Using Simple Serial Interface or Human Interface Device

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the RS5100 at a barcode.

4. Press and hold the trigger.

The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

for more information.

Pairing Using Bluetooth

Data Capture

Figure 9 RS5100 Aiming Pattern

When the RS5100 is in Pick List mode, the RS5100 does not decode the barcode until the center of the crosshair touches the barcode.

Figure 10 RS5100 Pick List Mode with Multiple Barcodes in Aiming Pattern

The RS5100 LEDs light green and a beep sounds to indicate the barcode was decoded successfully.

The captured data appears in the text field.

Scanning with the RS6000 Bluetooth Ring Scanner

Use the RS5000 Corded Imager to capture barcode data.

Figure 11 RS6000 Bluetooth Ring Scanner

Refer to the RS6000 Bluetooth Ring Scanner Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the RS6000:

Data Capture

1. Pair the RS6000 with the device. See Pairing Using Bluetooth Human Interface Device for more information.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the RS6000 at a barcode.

4. Press and hold the trigger.

Figure 12 RS6000 Aiming Pattern

When the RS6000 is in Pick List mode, the RS6000 does not decode the barcode until the center of the crosshair touches the barcode.

Figure 13 RS6000 Pick List Mode with Multiple Barcodes in Aiming Pattern

The RS6000 LEDs light green and a beep sounds to indicate the barcode was decoded successfully.

The captured data appears in the text field.

Data Capture

Scanning with RS507/RS507X Hands-Free Imager

Use the RS507/RS507X Hands-Free Imager to capture barcode data.

Figure 14 RS507/RS507X Hands-Free Imager

Refer to the RS507/RS507X Hands-free Imager Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the RS507/RS507X:

1. Pair the RS507/RS507X with the device. See Pairing the Bluetooth Ring Scanner on page 84 information.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the RS507/RS507X at a barcode.

4. Press and hold the trigger.

for more

Data Capture

Figure 15 RS507/RS507X Aiming Pattern

When the RS507/RS507X is in Pick List mode, the RS507/RS507X does not decode the barcode until the center of the crosshair touches the barcode.

Figure 16 RS507/RS507X Pick List Mode with Multiple Barcodes in Aiming Pattern

The RS507/RS507X LEDs light green and a beep sounds to indicate the barcode was decoded successfully.

The captured data appears in the text field.

Scanning with the DS2278 Digital Scanner

Use the DS2278 Digital Scanner to capture barcode data.

Figure 17 DS2278 Digital Scanner

Data Capture

Refer to the DS2278 Digital Scanner Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the DS2278:

1. Pair the DS2278 with the device. See Pairing a Bluetooth Scanner on page 88

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the scanner at a barcode.

4. Press and hold the trigger.

5. Ensure the aiming pattern covers the barcode.

for more information.

Upon successful decode, the scanner beeps and the LED flashes, and the scan line turns off.

The captured data appears in the text field.

Scanning with the DS3678 Digital Scanner

Use the DS3678 Bluetooth Scanner to capture barcode data.

Data Capture

Figure 18 DS3678 Digital Scanner

Refer to the DS36X8 Digital Scanner Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the DS3678:

1. Pair the scanner with the device. For more information, see Pairing Bluetooth Scanners.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the scanner at a barcode.

Data Capture

4. Press and hold the trigger.

Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

The captured data appears in the text field.

Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner

To scan with the DS3608 or DS3678:

1. Pair the scanner with the device. For more information, see Connecting a USB Scanner for the DS3608

or Pairing Bluetooth Scanners for the DS3678.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the scanner at a barcode.

Figure 19 Barcode Scanning (DS3678 shown)

4. Press and hold the trigger.

Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

Data Capture

Figure 20 DS3608/DS3678 Aiming Pattern

Figure 21 DS3608/DS3678 Pick List Mode with Multiple Barcodes in Aiming Pattern

5. The captured data appears in the text field.

Scanning with the LI3678 Linear Scanner

Use the LI3678 linear imager to capture barcode data.

Figure 22 LI3678 Linear Scanner

Refer to the LI36X8 Linear Scanner Product Reference Guide for more information.

NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to enable the scanner to decode barcode data and display the barcode content.

To scan with the LI3678:

Data Capture

1. Pair the LI3678 with the device. See Pairing a Bluetooth Scanner on page 88 for more information.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).

3. Point the LI3678 at a barcode.

4. Press and hold the trigger.

5. Ensure the aiming pattern covers the barcode.

Upon successful decode, the scanner beeps and the LED displays a single green flash.

The captured data appears in the text field.

Pairing the Bluetooth Ring Scanner

To connect the Bluetooth Ring Scanner to the device, use one of the following methods:

• Near Field Communication (NFC) (RS5100/RS6000 only)

• Simple Serial Interface (SSI)

• Bluetooth Human Interface Device (HID) Mode.

Pairing in SSI Mode Using Near Field Communication

The device provides the ability to pair the Ring Scanner in SSI mode using NFC.

NOTE: RS5100 and RS6000 only.

1. Ensure that the Ring Scanner is in SSI mode. Refer to the Ring Scanner User Guide for more

information.

2. Ensure that NFC is enabled on the device.

Data Capture

3. Align the NFC icon on the Ring Scanner with the NFC antenna on the device.

The Status LED blinks blue indicating that the Ring Scanner is attempting to establish connection with the device. When connection is established, the Status LED turns off and the Ring Scanner emits a single string of low/high beeps.

A notification appears on the device screen and the icon appears in the Status bar.

Pairing in HID Mode Using Near Field Communication

The device provides the ability to pair the Ring Scanner in HID mode using NFC.

NOTE: RS5100 and RS6000 only.

1. Ensure that NFC is enabled on the device.

2. Ensure that Bluetooth is enabled on the device.

3. Ensure that the Bluetooth device to discover is in discoverable mode.

4. Place the Ring Scanner in Human Interface Device (HID) mode. If the Ring Scanner is already in HID

mode, skip to step 4.

a. Remove the battery from the Ring Scanner.

b. Press and hold the Restore key.

c. Install the battery onto the Ring Scanner.

d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash

green.

e. Scan the barcode below to place the Ring Scanner in HID mode.

Data Capture

5. Remove the battery from the Ring Scanner.

6. Re-install the battery into the Ring Scanner.

7. Align the NFC icon on the Ring Scanner with the NFC antenna on the device.

1 NFC Logo

The Ring Scanner Status LED blinks blue indicating that the Ring Scanner is attempting to establish connection with the device. When connection is established, the Status LED turns off and the Ring Scanner emits a single string of low/high beeps.

A notification appears on the device screen and the icon appears in the Status bar.

Pairing Using Simple Serial Interface

Pair the Ring Scanner with the device using SSI.

Data Capture

1. Swipe up from the bottom of the Home screen and touch .

2. Using the Ring Scanner, scan the barcode on the screen.

The Ring Scanner emits a string of high/low/high/low beeps. The Scan LED flashes green indicating that the Ring Scanner is attempting to establish connection with the device. When connection is established, the Scan LED turns off and the Ring Scanner emits one string of low/high beeps.

A notification appears on the Notification panel and the icon appears in the Status bar.

Pairing Using Bluetooth Human Interface Device

Pair the Ring Scanner with the device using Human Interface Device (HID).

1. Ensure that Bluetooth is enabled on both devices.

2. Ensure that the Bluetooth device to discover is in discoverable mode.

3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.

4. Place the Ring Scanner in HID mode. If the Ring Scanner is already in HID mode, skip to step 5.

a. Remove the battery from the Ring Scanner.

b. Press and hold the Restore key.

c. Install the battery onto the Ring Scanner.

d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash

green.

e. Scan the barcode below to place the Ring Scanner in HID mode.

Figure 23 RS507/RS507x Ring Scanner Bluetooth HID Barcode

Data Capture

Figure 24 RS5100 / RS6000 Ring Scanner Bluetooth HID Barcode

5. Remove the battery from the Ring Scanner.

6. Re-install the battery into the Ring Scanner.

7. Swipe down from the Status bar to open the Quick Access panel and then touch .

8. Touch Bluetooth.

9. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area and displays them under Available devices.

10.Scroll through the list and select Ring Scanner.

The device connects to the Ring Scanner and Connected appears below the device name. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is established.

A notification appears on Notification panel and the icon appears in the Status bar.

Pairing a Bluetooth Scanner

Connect the scanner to the device using one of the following methods:

• Simple Serial Interface (SSI) mode

• Bluetooth Human Interface Device (HID) mode.

Pairing Using Simple Serial Interface

To pair the scanner with the device using SSI:

1. Ensure that the two devices are within 10 meters (32.8 feet) of one another.

2. Install the battery into the scanner.

3. On the device swipe up from the bottom of the Home screen and touch .

Figure 25 Bluetooth Pairing Utility

Data Capture

4. Using the scanner, scan the barcode on the screen.

The scanner emits a high/low/high/low beeps. The Scan LED flashes green indicating that the scanner is attempting to establish connection with the device. When connection is established, the Scan LED turns off and the scanner emits one string of low/high beeps.

5. On the device touch the Home button.

Pairing Using Bluetooth Human Interface Device

To pair the scanner with the device using HID:

1. Remove the battery from the scanner.

2. Replace the battery.

3. After the scanner reboots, scan the barcode below to place the scanner in HID mode.

4. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .

5. Touch Bluetooth.

6. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area

and displays them under Available devices.

7. Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial

DataWedge

DataWedge is a utility that adds advanced barcode scanning capability to any application without writing code. It runs in the background and handles the interface to built-in barcode scanners. The captured barcode data is converted to keystrokes and sent to the target application as if it was typed on the keypad.

DataWedge allows any app on the device to get data from input sources such as a barcode scanner, MSR, RFID, voice, or serial port and manipulate the data based on options or rules.

Configure DataWedge to:

• Provide data capture services from any app.

• Use a particular scanner, reader or other peripheral device.

• Properly format and transmit data to a specific app.

Data Capture

number.

The device connects to the scanner, the scanner beeps once and Connected appears below the device name. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is established.

To configure DataWedge refer to techdocs.zebra.com/datawedge/

Enabling DataWedge

1. Swipe up from the bottom of the Home screen and touch .

2. Touch > Settings.

3. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that

DataWedge is enabled.

4. Touch the Home button.

Disabling DataWedge

1. Touch .

2. Touch Settings.

3. Touch DataWedge enabled.

The blue check disappears from the checkbox indicating that DataWedge is disabled.

Supported Decoders

NOTE: DataWedge supports the decoders listed below but not all are validated on this device.

Data Capture

Table 6 Supported Decoders

Decoders

SE965

Internal Laser Scanner

Australian Postal -- O O O O O O O O --

Aztec -- X X X X X X X X --

Canadian Postal -- O O O O O -- -- -- --

Chinese 2 of 5 O O O O O O O O O O

Codabar X X X X X X X X X X

Code 11 O O O O O O O O O O

Code 128 X X X X X X X X X X

Code 39 X X X X X X X X X X

Code 93 O O O O O O O O O O

Composite AB -- O O O O O O O O --

Composite C -- O O O O O O O O --

Discrete 2 of 5 O O O O O O O O O O

Datamatrix -- X X X X X X X X --

Dutch Postal -- O O O O O O O O --

DotCode O O O O O O O O O O

EAN13 X X X X X X X X X X

EAN8 X X X X X X X X X X

Grid Matrix O O O O O O O O O O

GS1 DataBar X X X X X X X X X X

GS1 DataBar Expanded

GS1 DataBar Limited O O O O O O O O O O

GS1 Datamatrix -- O O O O O -- O O --

GS1 QRCode -- O O O O O -- O O --

HAN XIN -- O O O O O -- -- O O

Interleaved 2 of 5 O O O O O O O O O O

X X X X X X X X X X

SE4720

Internal Imager

SE4770

Internal Imager

SE4850-ER

Internal Imager

RS5100

RS6000

DS2278

RS507/RS507X

DS3678

LI3678

Data Capture

Table 6 Supported Decoders (Continued)

Decoders

SE965

Internal Laser Scanner

Japanese Postal -- O O O O O O O O --

Korean 3 of 5 O O O O O O O O O O

MAIL MARK -- X X X X X -- X X --

Matrix 2 of 5 O O O O O O O O O O

Maxicode -- X X X X X X X X --

MicroPDF -- O O O O O O O O --

MicroQR -- O O O O O O O O --

MSI O O O O O O O O O O

PDF417 -- X X X X X X X X --

QR Code -- X X X X X X X X --

Decoder Signature -- O O O O O O O -- --

TLC 39 O O O O O O O O O O

Trioptic 39 O O O O O O O O O O

UK Postal -- O O O O O O O O --

UPCA X X X X X X X X X X

UPCE0 X X X X X X X X X X

UPCE1 O O O O O O O O O O

US4state -- O O O O O O O O --

US4state FICS -- O O O O O O O O --

US Planet -- O O O O O O O O --

US Postnet -- O O O O O O O O --

SE4720

Internal Imager

SE4770

Internal Imager

SE4850-ER

Internal Imager

RS5100

RS6000

DS2278

RS507/RS507X

DS3678

LI3678

Key

X = Enabled O = Disabled

-- = Not Supported

Touch the Back button to return to the previous screen.

Wireless

This section provides information on the following wireless features:

• Wireless Local Area Network (WLAN)

• Bluetooth

• Cast

• Near Field Communications (NFC)

Wireless Local Area Networks

Wireless local area networks (WLANs) allow the device to communicate wirelessly inside a building. Before using the device on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the device must both be properly configured to enable this communication.

Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius servers, etc.) for instructions on how to set up the infrastructure.

Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks settings configure the device to match the security scheme.

The device supports the following WLAN security options:

• Open

• Wireless Equivalent Privacy (WEP)

• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)

• WPA/WPA2/WPA3 Enterprise (EAP)

• Protected Extensible Authentication Protocol (PEAP) - with MSCHAPV2 and GTC authentication.

• Transport Layer Security (TLS)

• Tunneled Transport Layer Security (TTLS) - with Password Authentication Protocol (PAP),

MSCHAP, MSCHAPv2, and GTC authentication

• Flexible Authentication via Secure Tunneling (EAP-FAST) - with MSCHAPV2 and GTC

authentication

The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.

NOTE: To extend the life of the battery, turn off Wi-Fi when not in use.

Connecting to a Wi-Fi Network

To connect to a Wi-Fi network:

1. Go to Settings > Network & Internet.

2. Touch Wi-Fi to open the Wi-Fi screen. The device searches for WLANs in the area and lists them.

3. Scroll through the list and select the desired WLAN network.

4. For open networks, touch profile once or press and hold and then select Connect or for secure

networks enter the required password or other credentials then touch Connect. See the system administrator for more information.

The device obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the device with a fixed internet protocol (IP) address, see Configuring the Device to Use a Static IP Address on page 96.

5. In the Wi-Fi setting field, Connected appears indicating that the device is connected to the WLAN.

Removing a Wi-Fi Network

To remove a remembered or connected network:

Wireless

1. Go to Settings.

2. Touch Network & Internet > W-Fi.

3. Scroll down to the bottom of the list and touch Saved networks.

4. Touch the name of the network.

5. Touch FORGET.

6. Touch the Home button.

WLAN Configuration

This section provides information on configuring Wi-Fi settings.

Configuring a Secure Wi-Fi Network

1. Go to Settings.

2. Touch Network & Internet > Wi-Fi.

3. Slide the switch to the ON position.

4. The device searches for WLANs in the area and lists them on the screen.

5. Scroll through the list and select the desired WLAN network.

6. Touch the desired network. If the network security is Open, the device automatically connects to the

network. For all other network security a dialog box appears.

7. If the network security is WPA/WPA2-Personal, or WEP, enter the required password and then touch

Connect.

8. If the network security is WPA/WPA2/WPA3 Enterprise:

a. Touch the EAP method drop-down list and select one of the following:

• TTLS

• LEAP.

b. Fill in the appropriate information. Options vary depending on the EAP method chosen.

• Certification Authority (CA) certificates are installed using the Security settings.

• When using the EAP methods PEAP, TLS, or TTLS you must specify a domain.

• Touch Advanced options to display additional network options.

NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring

for a Proxy Server for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address for setting the device to use a static IP address.

9. Touch Connect.

10. Touch the Home button.

Manually Adding a Wi-Fi Network

Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when out of range.

1. Go to Settings.

Wireless

2. Touch Network & Internet > Wi-Fi.

3. Slide the Wi-Fi switch to the On position.

4. Scroll to the bottom of the list and select Add network.

5. In the Network name text box, enter the name of the Wi-Fi network.

6. In the Security drop-down list, set the type of security to:

• None

• WEP

• WPA/WPA2-Personal

• WPA/WPA2/WPA3-Enterprise

7. If the network security is None, touch Save.

8. If the network security is WEP or WPA/WPA2-Personal, enter the required password and then touch

Save.

9. If the network security is WPA/WPA2/WPA3 Enterprise:

a. Touch the EAP method drop-down list and select one of the following:

• TTLS

• LEAP.

b. Fill in the appropriate information. Options vary depending on the EAP method chosen.

• Certification Authority (CA) certificates are installed using the Security settings.

• When using the EAP methods PEAP, TLS, or TTLS you must specify a domain.

• Touch Advanced options to display additional network options.

NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring

for a Proxy Server on page 96 for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address on page 96 for setting the device to use a static IP address.

Touch Save. To connect to the saved network, touch and hold on the saved network and select

10.

Connect to network.

11. Touch the Home button.

Configuring for a Proxy Server

A proxy server is a server that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server and requests some service, such as a file, connection, web page, or other resource, available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client.

It is important for enterprise customers to be able to set up secure computing environments within their companies, making proxy configuration essential. Proxy configuration acts as a security barrier ensuring that the proxy server monitors all traffic between the Internet and the intranet. This is normally an integral part of security enforcement in corporate firewalls within intranets.

1. Go to Settings.

2. Touch Network & Internet > Wi-Fi.

Wireless

3. Slide the Wi-Fi switch to the On position.

4. In the network dialog box, select and touch a network.

5. To edit a connected network, touch and then touch the down arrow to hide the keyboard.

6. Touch Advanced options.

7. Touch Proxy and select Manual.

8. In the Proxy hostname text box, enter the address of the proxy server.

9. In the Proxy port text box, enter the port number for the proxy server.

10. In the Bypass proxy for text box, enter addresses for web sites that are not required to go through the

proxy server. Use a comma “,” between addresses. Do not use spaces or carriage returns between addresses.

11. If editing a connected network, touch Save, otherwise, touch Connect.

12. Touch the Home button.

Configuring the Device to Use a Static IP Address

By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet protocol (IP) address when connecting to a wireless network.

1. Go to Settings.

2. Touch Network & Internet > Wi-Fi.

3. Slide the Wi-Fi switch to the On position.

4. In the network dialog box, select and touch a network.

5. To edit a connected network, touch and then touch the down arrow to hide the keyboard.

6. Touch Advanced options.

7. Touch IP settings and select Static.

8. In the IP address text box, enter an IP address for the device.

If required, in the Gateway text box, enter a gateway address for the device.

10. If required, in the Network prefix length text box, enter the prefix length.

11. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.

12. If required, in the DNS 2 text box, enter a DNS address.

13. In the Privacy drop-down, the default Use randomized MAC (default) provides enhanced privacy, or

you can choose Use device MAC.

14. If editing a connected network, touch Save, otherwise, touch Connect.

15. Touch the Home button.

Wi-Fi Preferences

Use the Wi-Fi preferences to configure advanced Wi-Fi settings. From the Wi-Fi screen scroll down to the bottom of the screen and touch Wi-Fi preferences.

• Turn on Wi-Fi automatically - When enabled, Wi-Fi automatically turns back on when near high quality saved networks.

• Notify for public networks - Notifies you when a high-quality public network is available.

Wireless

• Advanced - Touch to expand options.

• Additional settings - See Additional Wi-Fi Settings.

• Install Certificates – Touch to install certificates.

• Network rating provider - Disabled (AOSP devices). To help determine what constitutes a good

Wi-Fi network, Android supports external Network rating providers that provide information about the quality of open Wi-Fi networks. Select one of the providers listed or None. If none are available or selected, the Connect to open networks feature is disabled.

• Wi-Fi Direct - Displays a list of devices available for a direct Wi-Fi connection.

Additional Wi-Fi Settings

NOTE: Additional Wi-Fi settings are for the device, not for a specific wireless network.

Use the Additional Settings to configure additional Wi-Fi settings. To view the additional Wi-Fi settings, scroll to the bottom of the Wi-Fi screen and touch Wi-Fi Preferences > Advanced > Additional settings.

• Regulatory

• Country Selection - Displays the acquired country code if 802.11d is enabled, else it displays the

currently selected country code.

• Region code - Displays the current region code.

• Band and Channel Selection

• Wi-Fi frequency band - Set the frequency band to: Auto (default), 5 GHz only or 2.4 GHz only.

• Available channels (2.4 GHz) - Touch to display the Available channels menu. Select specific

channels and touch OK.

• Available channels (5 GHz) - Touch to display the Available channels menu. Select specific

channels and touch OK.

• Logging

• Advanced Logging – Touch to enable advanced logging or change the log directory.

• Wireless logs - Use to capture Wi-Fi log files.

• About

• Version - Displays the current Fusion information.

Wi-Fi Direct

Wi-Fi Direct devices can connect to each other without having to go through an access point. Wi-Fi Direct devices establish their own ad-hoc network when required, letting you see which devices are available and choose which one you want to connect to.

1. Go to Settings.

2. Touch Wi-Fi > Wi-Fi preferences > Advanced > Wi-Fi Direct. The device begins searching for

another Wi-Fi Direct device.

3. Under Peer devices, touch the other device name.

Wireless

• Fusion Logger - Touch to open the Fusion Logger application. This application maintains a history of high level WLAN events which helps to understand the status of connectivity.

• Fusion Status - Touch to display live status of WLAN state. Also provides information about the device and connected profile.

4. On the other device, select Accept.

Connected appears on the device. On both devices, in their respective Wi-Fi Direct screens, the other

device name appears in the list.

Bluetooth

Bluetooth devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 m (32.8 ft)) communication and low power consumption.

Devices with Bluetooth capabilities can exchange information (for example, files, appointments, and tasks) with other Bluetooth enabled devices such as printers, access points, and other mobile devices.

The device supports Bluetooth Low Energy. Bluetooth Low Energy is targeted at applications in the healthcare, fitness, security, and home entertainment industries. It provides reduced power consumption and cost while maintaining standard Bluetooth range.

Adaptive Frequency Hopping

Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work. There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:

• Channel Classification - A method of detecting an interference on a channel-by-channel basis, or pre-defined channel mask.

• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network.

• Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping channels.

Security

Wireless

• Channel Maintenance - A method for periodically re-evaluating the channels.

When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate channels. AFH coexistence allows enterprise devices to operate in any infrastructure.

NOTE: It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required.

The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need. Link-level security occurs between devices, not users, while application-level security can be implemented on a per-user basis. The Bluetooth specification defines security algorithms and procedures required to authenticate devices, and if needed, encrypt the data flowing on the link between the devices. Device authentication is a mandatory feature of Bluetooth while link encryption is optional.

Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate the devices and create a link key for them. Entering a common personal identification number (PIN) in the devices being paired generates the initialization key. The PIN is never sent over the air. By default, the Bluetooth stack responds with no key when a key is requested (it is up to user to respond to the key request event). Authentication of Bluetooth devices is based-upon a challenge-response transaction. Bluetooth allows for a PIN or passkey used to create other 128-bit keys used for security and encryption. The encryption key is derived from the link key used to authenticate the pairing devices. Also worthy of note is the limited range and fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping difficult.

Recommendations are:

• Perform pairing in a secure environment

• Keep PIN codes private and do not store the PIN codes in the device

• Implement application-level security.

Bluetooth Profiles

The device supports the Bluetooth services listed.

Table 7 Bluetooth Profiles

Service Discovery Protocol (SDP)

Serial Port Profile (SPP) Allows use of RFCOMM protocol to emulate serial cable

Object Push Profile (OPP) Allows the device to push and pull objects to and from a push

Advanced Audio Distribution Profile (A2DP)

Audio/Video Remote Control Profile (AVRCP)

Profile Description

Handles the search for known and specific services as well as general services.

connection between two Bluetooth peer devices. For example, connecting the device to a printer.

server.

Allows the device to stream stereo-quality audio to a wireless headset or wireless stereo speakers.

Allows the device to control A/V equipment to which a user has access. It may be used in concert with A2DP.

Wireless

Table 7 Bluetooth Profiles (Continued)

Profile Description

Personal Area Network (PAN) Allows the use of Bluetooth Network Encapsulation Protocol to

provide L3 networking capabilities over a Bluetooth link. Only PANU role is supported.

Human Interface Device Profile (HID)

Headset Profile (HSP) Allows a hands-free device, such as a Bluetooth headset, to place

Hands-Free Profile (HFP) Allows car hands-free kits to communicate with the device in the

Phone Book Access Profile (PBAP)

Out of Band (OOB) Allows exchange of information used in the pairing process. Pairing

Symbol Serial Interface (SSI) Allows for communication with Bluetooth Imager.

Generic Attribute Profile (GATT) Provides profile discovery and description services for Bluetooth

Dial Up Networking (DUN) Provides a standard to access the Internet and other dial-up

OBject EXchange (OBEX) Facilitates the exchange of binary objects between devices.

Allows Bluetooth keyboards, pointing devices, gaming devices and remote monitoring devices to connect to the device.

and receive calls on the device.

car.

Allows exchange of Phone Book Objects between a car kit and a mobile device to allow the car kit to display the name of the incoming caller; allow the car kit to download the phone book so you can initiate a call from the car display.

is completed using the Bluetooth radio, but requires information from the OOB mechanism. Using OOB with NFC enables pairing when devices simply get close, rather than requiring a lengthy discovery process.

Low Energy protocol. It defines how attributes are grouped together into sets to form services.

services over Bluetooth.

Bluetooth Power States

The Bluetooth radio is off by default.

• Suspend - When the device goes into suspend mode, the Bluetooth radio stays on.

• Airplane Mode - When the device is placed in Airplane Mode, the Bluetooth radio turns off. When

Airplane mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the Bluetooth radio can be turned back on if desired.

Bluetooth Radio Power

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (for example, an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.

NOTE: To achieve the best battery life, turn off radios when not in use.

100

Enabling Bluetooth

1. Swipe down from the Status bar to open the Notification panel.

2. Touch to turn Bluetooth on.

3. Touch the Home button.

Disabling Bluetooth

1. Swipe down from the Status bar to open the Notification panel.

2. Touch to turn Bluetooth off.

3. Touch the Home button.

Discovering Bluetooth Device(s)

The device can receive information from discovered devices without pairing. However, once paired, the device and a paired device exchange information automatically when the Bluetooth radio is on.

1. Ensure that Bluetooth is enabled on both devices.

2. Ensure that the Bluetooth device to discover is in discoverable mode.

Wireless

3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.

4. Swipe down from the Status bar to open the Quick Access panel.

5. Touch and hold Bluetooth.

6. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area

and displays them under Available devices.

7. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.

8. Touch Pair on both devices.

9. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is

established.

Changing the Bluetooth Name

By default, the device has a generic Bluetooth name that is visible to other devices when connected.

1. Go to Settings.

2. Touch Connected devices > Connection preferences > Bluetooth.

3. If Bluetooth is not on, move the switch to turn Bluetooth on.

4. Touch Device name.

5. Enter a name and touch RENAME.

6. Touch the Home button.

Connecting to a Bluetooth Device

Once paired, connect to a Bluetooth device.

1. Go to Settings.

2. Touch Connected devices > Connection preferences > Bluetooth.

101

Zebra MC3300x Product Reference Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

About This Guide

Configurations

Notational Conventions

Icon Conventions

Service Information

Determining Software Versions

Determining the Serial Number

Getting Started

Unpacking

MC3300x-G Features

Front View

Back View

MC3300x-R Features

Rotating Scan Turret

Front View

Back View

MC3300x-S Features

Front View

Back View

Setting Up the Device

Installing a microSD Card

Installing the MC3300x-G Battery

Installing the MC3300x-R/S Battery

Charging the Battery

Charging Indicators

Real-Time Clock Backup

Replacing the Battery in the MC3300x-G

Replacing the Battery in the MC3300x-R/S

Using the Device

Home Screen

Setting Home Screen Rotation

Status Bar

Managing Notifications

Opening the Quick Access Panel

Editing Icons on the Quick Settings Bar

Battery Management

Checking Battery Status

Monitoring Battery Usage

Low Battery Notification

Interactive Sensor Technology

Waking the Device

USB Communication

Transferring Files

Transferring Photos

Disconnect from the Host Computer

Settings

Accessing Settings

Display Settings

Setting the Screen Brightness Manually

Setting Night Light

Setting Screen Rotation

Setting Screen Timeout

Setting Font Size

Touch Panel Mode

Setting the Date and Time

General Sound Setting

Sound Options

Setting Wake-Up Sources

Remapping a Button

Remappable Keys

UI Listed Keys

Other Remappable Keys

Non-Remappable Keys

Keyboards

Keyboard Configuration

Using the Android and Gboard Keyboards

Using the Enterprise Keyboard

Language Usage

Changing the Language Setting

Adding Words to the Dictionary

Notifications

Setting App Notifications

Applications

Accessing Apps

Switching Between Recent Apps