MC3300ax
Mobile Computer
Quick Start Guide
MN-004195-01EN Rev. A
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in
many jurisdictions worldwide. All other trademarks are the property of their respective owners.
© 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
Information in this document is subject to change without notice. The software described in this document
is furnished under a license agreement or nondisclosure agreement. The software may be used or copied
only in accordance with the terms of those agreements.
For further information regarding legal and proprietary statements, please go to:
SOFTWARE:zebra.com/linkoslegal
COPYRIGHTS:zebra.com/copyright
WARRANTY:zebra.com/warranty
END USER LICENSE AGREEMENT: zebra.com/eula
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used, reproduced,
or disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the results of use of, or inability to
use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Publication Date
June 8, 2021
2
MC3300ax Mobile Computer Quick Start Guide
Configurations
MC3300ax used in this guide refers to all configurations, except where noted. MC3300ax-G refers to the
Trigger configuration. MC3300ax-S refers to the Straight configuration.
MC3300ax-G Features
Front View
Figure 1 MC3300ax-G Front View
NOTE: The MC3300ax-G does not ship with a pre-installed hand strap. However, one can be purchased
separately as a standalone accessory (SG-MC33-HDSTPG-01) if required.
Number Item Function
1 Display Displays all information needed to operate the device.
2 Scan button Initiates data capture when a scan application is enabled.
3 Keypad Use to enter data and navigate on screen functions.
4 Power key Press to suspend and resume device. Provides the following options:
Power off - Turn off the device.
Restart - Reboot the device when software stops responding.
5 Microphone Use for communications in Handset mode.
6 Battery release latch Release the battery from the device.
7 Trigger Initiates data capture when a scan application is enabled.
8 Charge /Application
notification LED or
scan/decode status
Indicates the battery charge state while charging, an application notification
was received, or the scan/decode status.
3
Back View
Figure 2 MC3300ax-G Back View
MC3300ax Mobile Computer Quick Start Guide
Number Item Function
9 NFC antenna Provides communication with other NFC-enabled devices.
10 Scanner exit window Provides data capture using integrated scanner/imager option.
11 Speaker Provides audio output for video and music playback.
12 Battery release latch Release the battery from the device.
13 Battery Provides power for operating the device.
4
MC3300ax Mobile Computer Quick Start Guide
MC3300ax-S Features
Front View
Figure 3 MC3300ax-S Front View
Number Item Function
1 Display Displays all information needed to operate the device.
2 Charge /Application
notification LED or
scan/decode status
3 Side Key scan button Initiates data capture when a scan application is enabled.
4 Battery release latch Release the battery from the device.
5 Power key Press to suspend and resume device. Provides the following options:
6 Microphone Use for communications in Handset mode.
7 Keypad Use to enter data and navigate on screen functions.
8 Scan button Initiates data capture when a scan application is enabled.
Indicates the battery charge state while charging, an application
notification was received, or the scan/decode status.
Power off - Turn off the device.
Restart - Reboot the device when software stops responding.
5
Back View
Figure 4 MC3300ax-S Back View
MC3300ax Mobile Computer Quick Start Guide
Number Item Function
9 Battery Provides power for operating the device.
10 Camera/Flash Provides image capture capability with LED illumination.
11 NFC antenna Provides communication with other NFC-enabled devices.
12 Scanner exit window Provides data capture using the scanner.
13 Speaker Provides audio output for video and music playback.
14 Side key scan button Initiates data capture when a scan application is enabled.
15 Battery release latch Release the battery from the device.
16 Hand strap Use for securely holding the device. Comes pre-installed on every
MC3300ax-S device.
Setup
To start using the device for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the device
• Power on the device.
6
MC3300ax Mobile Computer Quick Start Guide
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
1. Using a coin or finger, remove the microSD card cover.
2. Slide the microSD card holder to the Open position.
3. Lift the microSD card holder.
4. Place the microSD card into the contact area with the contacts facing down.
5. Close the microSD card holder and slide the microSD card holder to the Lock position.
6. Replace the microSD card cover and ensure that it is installed properly.
7
MC3300ax Mobile Computer Quick Start Guide
Installing the MC3300ax-G Battery
The device is shipped with the 7000 mAh PowerPrecision+ battery. The MC33 rechargeable Li-Ion battery
with BLE beacon is available as an option.
To install the battery:
1. Loosen the hand strap (if installed).
2. Align the battery into the battery compartment.
3. Slide the front of the battery into the battery compartment.
4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-G
return to the home position.
5. Tighten the hand strap (if installed).
6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device.
8
MC3300ax Mobile Computer Quick Start Guide
Installing the MC3300ax-S Battery
The device is shipped with the 7000 mAh PowerPrecision+ battery. The MC33 rechargeable Li-Ion battery
with BLE beacon is available as an option.
To install the battery:
1. Loosen the hand strap, if needed.
2. Align the battery into the battery compartment.
3. Slide the front of the battery into the battery compartment.
4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-S
return to the home position.
5. Tighten the hand strap, if needed.
6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device.
9
Loading...