Zebra FX7400 Fixed RFID Reader FX7400 Series Regulatory Guide English

72-125267-03 Revision A — May 2015

FX7400 Series RFID

Regulatory Information

©2015 ZIH Corp and/or its affiliates. All rights reserved.
Zebra reserves the right to make changes to any product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or
use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any patent
right or patent, covering or relating to any combination, system, apparatus, machine, material,
method, or process in which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners.

©2015 ZIH Corp and/or its affiliates. All rights reserved.

Regulatory Information

This provides information for the Zebra, FX series RFID Reader products,
Regulatory Model No: FX7400. For information on setting up and using the reader, refer to the
FX Series RFID Reader Integration Guide at http://www.zebra.com/support.

All Zebra devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required. Regulatory information is available from:

http://www.zebra.com/support.

Zebra devices must be professionally installed. The Radio Frequency Output Power will not
exceed the maximum allowable limit for the country of operation. Any changes or modifications to
Zebra equipment, not expressly approved by Zebra, could void the authority to operate the
equipment.

Regulatory Certification

The device is compliant with the following values and antenna characteristics:

FX7400 US EU

Max Conducted RF Power Allowed + 30dBm +29.3dBm
Max. System Gain Allowed (Antenna Gain and Cable loss) + 6dBiL +5.5dBiL
Max Radiated Power Allowed 4W EIRP 2W ERP
Max Antenna Horizontal Beamwidth (3dB) Allowed N/A Per EN 302 208

Antennas

When using antennas not supplied by Zebra, the antennas must comply with all of the appropriate
specifications and criteria listed in the Regulatory Certification table.

Country Approvals

Regulatory markings are applied to the device signifying the radio(s) are approved for use in the
following countries: United States, Canada and Europe. Local language translations are available
at: http://www.zebra.com/support.

Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings.
This is available at: http://www.zebra.com/doc.

Brasil: Declarações Regulamentares para FX7400 - Brasil

Nota: A marca de certificação se aplica ao Transceptor, modelo FX7400. Este equipamento opera
em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter
primário.

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br

CHILE:Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.

Korea Warning Statement for Class B ITE

기 종 별

B급 기기

( 가정용 방송통신기기 )

Ta iw an .

이 기기는 가정용 (B 급 ) 으로 전자파적합등록을
한 기기로서 주로 가정에서 사용하는 것을 목적
으로 하며 , 모든 지역에서 사용할 수 있습니다 .

사 용 자 안 내 문

Ukraine

This equipment corresponds to requirements of the Technical Regulation No. 1057, 2008 on
restrictions as to the use of some dangerous substances in electric and electronic devices.

Health and Safety Recommendations

Warning for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres

You are reminded of the need to observe restrictions on the use of radio devices in fuel depots,
chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or
metal powders).

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical

adjacent equipment is not adversely affected.

Use With Hearing Aids

When some wireless devices are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and wireless devices also vary in the amount
of interference they generate. In the event of interference you may want to consult your hearing aid
supplier to discuss solutions.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the
operation of your wireless product may interfere with the medical device.

equipment. When installed adjacent to other equipment, it is advised to verify that the

FCC / EU RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on "International" human exposure to
eletromagnic fields refer to the Zebra Declaration of Conformity (DoC) at

http://www.zebra.com/doc.

US and Canada

To comply with FCC RF exposure requirements, antennas that are mounted externally at remote
locations or operating near users at stand-alone desktop of similar configurations must operate with
a minimum separation distance of 24 cm from all persons.

EU

To comply with EU RF exposure requirements, antennas that are mounted externally at remote
locations or operating near users at stand-alone desktop of similar configurations must operate with
a minimum separation distance of 24 cm from all persons.

Power Supply

Use ONLY a LISTED, Type no. 50-14000 (24Vdc / 500mA min), or PWRS-14000 (24Vdc / 500mA
min), Direct Plug-In Power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative
Power Supply will invalidate any approvals given to this unit and may be dangerous.

Operation of the device without regulatory approval is illegal.

Battery

Caution: Risk of Explosion if Battery is replaced by an incorrect Type. Dispose of Used
Batteries According to the Instructions.

Air Handling Space Applications

This device is suitable for use in Environmental Air Handling Space (EAHS) in accordance with
Section 300-22(c) of the National Electric Code, and Sections 2-128, 12-010(3) and 12-100 of the
Canadian Electrical Code, Part 21, CSA C22.1.

All Cables intended for interconnecting the FX7400 to other devices shall be suitable rated for use in
Environmental Air Handling Space per UL 2043.

Devices such as Power Adaptors, PoE (Power Injectors), antennas shall not be installed in the
Environmental Air Handling Space unless they are suitable for use in the EAHS per UL 2043.

Wireless Devices Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the radio is approved
for use in the following countries: United States, Canada and Europe

Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings. This
is available at http://www.zebra.com/doc.

Operation of the device without regulatory approval is illegal.

1

: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia,

Note
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

Country Selection - Worldwide Version Only

Select only the country in which you are using the device. Any other selection will make the operation
of this device illegal.

1

Frequency of Operation – USA (FCC) and Canada

The range of channels is limited by firmware.

Radio Frequency Interference Requirements - FCC

Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio

instructions, may cause harmful interference to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected

•

Consult the dealer or an experienced radio/TV technician for help

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

frequency energy and, if not installed and used in accordance with the

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted for
successful communication.

This device has been designed to operate with the antennas listed below , and having a maximum
gain of 6dBi. Antennas not included in this list or having a gain greater than 6dBi are strictly prohibited
for use with this device. The required antenna impedance is 50 ohms.

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada
technical specifications were met.

To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than the 6dBi permitted for
successful communication.

This device has been designed to operate with antennas having a maximum gain of 6dBi. Antennas
having a gain greater than 6dBi are strictly prohibited for use with this device. The required antenna
impedance is 50ohms.

Marking and European Economic Area (EEA)

RFID devices for use through the EEA have the following restrictions:

•

Maximum radiated transmit power of 2W ERP in the frequency range 865.6-867.6MHz

Statement of Compliance

Zebra hereby, declares that this device is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be
obtained from http://www.zebra.com/doc.

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recy­cling. For information on how to return product, please go to: http://www.zebra.com/weee.

Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля
отидете на адрес: http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden
Sie unter http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο ∆ιαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un pro­ducto, visite: http://www.zebra.com/weee.

ζωής τους, πρέπει να

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consul­tez : http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzi­one, visitare il seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otr-
reizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi b
kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újra­hasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do
firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie interne­towej http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra
para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie
returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra­yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra
för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.

ūti grąžinti utilizuoti į

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If
there is a problem with the equipment, they will contact Zebra Support at:

http://www.zebra.com/support.

For the latest version of FX7400 guides and software, go to:

http://www.zebra.com/support.

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty.

For Australia Only:

For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson
Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be
excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.Zebra Technologies Corporation Australia’s limited warranty above is in
addition to any rights and remedies you may have under the Australian Consumer Law. If you have
any queries, please call Zebra Technologies Corporation at+65 6858 0722. You may also visit our
website: http://www.zebra.com

for the most updated warranty terms.