Zebra FLB3508, FLB3578 Quick Reference Guide [tr]

Download

Page 1

STB3508/3578 Bağlantısı

Hızlı Başvuru Kılavuzu

Page 2

2 STB3508/3578 Cradle

includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Zebra reserves the right to make changes to any software or product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Zebra products.

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty.

Page 3

Quick Reference Guide 3

Introduction

The FLB3508/3578 cordless scanner cradle acts as a stand, host communication interface and charger for the LS3578 cordless scanner. 15" Radius The bracket is then mounted on the forklift surface. The FLB3578 cradle receives data from the scanner via a Bluetooth radio, and sends that data to the host through an attached cable. The cradle also charges the scanner’s internal battery pack when the scanner is inserted. A portable power supply on the forklift supplies power to the cradle. This document provides basic instructions on setting up and using the cradle.

CAUTION LS3478 cordless scanners are incompatible with FLB3508/3578

cradles. LS3578 cordless scanners are incompatible with FLB3408/3478 cradles.

Equipment Supplied

The cradle package includes:

• Cradle

• Mounting bracket with isolators

• Three 8-32 x 1,5" Philips head screws (for attaching cradle to mounting bracket).

Accessories

The following equipment may be needed:

• Four 1/4-20 screws, minimum length 1,0" (for fastening bracket to mounting surface).

Save the shipping container for storing or shipping. Inspect all equipment for damage. If anything is damaged or missing, call an authorized Zebra business Support Center immediately.

Cradle Parts

Page 5

Quick Reference Guide 5

Mounting Bracket

Cable

Access

Hole

Cable Tie Holes

Isolator

Cable Tie Holes

Isolator

Converter Knob

The Mounting Bracket

The mounting bracket is used to install the cradle on a forklift. Mount the bracket so that the cradle is within the user’s reach envelope. The recommended reach envelope has a radius of 15" measured from the front of the user’s shoulder to the scanner grip. Three isolators ensure secure attachment with minimized vibration. The bracket has holes that provide access the host and power ports, and enable securing the cables with cable ties.

CAUTION Ensure the Converter Knob is in the position shown above. If not,

rotate the knob counterclockwise to activate latches.

Page 6

6 STB3508/3578 Cradle

Host

Port

Power Port

Cradle Connections

IMPORTANT Connect the interface cable and power supply (if necessary) in

the following order to ensure proper operation of the scanner and cradle.

1. Insert the interface cable from the host computer into the cradle’s host port.

2. Connect the forklift power supply to the

cradle’s power port, if applicable.

3. Optional: Thread the host cable over the cable hook and run the host and power cables into their respective cable grooves, or use cable ties to secure them to the mounting plate after it is attached to the cradle (see Mounting the Cradle on the

Forklift).

4. Pair the scanner with the cradle by scanning the pairing bar code on the cradle.

5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the Product Reference Guide.

Changing the Host Interface

To connect to a different host, or to the same host through a different cable:

1. Unplug the power supply from the cradle, if used.

2. Unplug the interface cable from the host.

3. Connect the interface cable to the new host,

or the new interface cable to the existing host.

4. Reconnect the power supply, if required.

5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces).

Refer to the Product Reference Guide.

CAUTION If the scanner does not recognize the host, disconnect the power

supply, then reconnect after connecting the host cable.

Page 7

Quick Reference Guide 7

15" Radius

Side View, Standing

Top View

Side View, Seated

Reach Envelope

15" Radius

Mounting the Cradle on the Forklift

1. Consult an environmental health and safety

manager to determine an appropriate

mounting location within the recommended 15" reach envelope.

2. Ensure the converter knob is in the correct position (see Caution in The Mounting

Bracket section).

3. Attach the host and power cables to the appropriate ports (see Cradle Connections).

4. Position the cradle with the screw holes in the cradle aligning with the holes in the isolators.

5. Attach the cradle to the bracket using three 8-32 x 1,5" Philips screws through the cradle and isolator holes.

6. Mark the mounting surface through the four screw holes on the mounting bracket, or use the mounting template to determine the location of the screw holes.

7. Pre-drill holes into the mounting surface to accommodate four 1/4-20, minimum 1.0" length, Philips head screws.

8. If desired, thread cable ties through the holes on each side of the bracket and secure the host and power cables along the edges of the bracket.

9. Attach the bracket to the mounting surface.

10.Place the scanner in the cradle.

Page 8

8 STB3508/3578 Cradle

Inserting the Scanner in the Cradle

To insert the scanner in the cradle, insert the scanner top first. Then, push the handle until it clicks into place, engaging the contacts in the cradle and scanner.

Sending Data to the Host Computer

The cradle receives data from the scanner via a wireless radio connection and transmits it to the host computer via the host cable. The scanner and cradle must be paired for successful wireless communication.

Pairing

Pairing registers a scanner to the cradle such that the scanner and cradle can exchange information. The FLB3578 operates in two modes: scanner-to-cradle and multi scanner-to-cradle. In scanner-to-cradle mode, the scanner is paired to the cradle either by insertion into the cradle (if pairing on insertion is enabled), or by scanning the pairing bar code. In multi scanner-to-cradle mode, up to three scanners can be paired to one cradle. A multipoint bar code must be scanned to activate this feature. The cradle includes a pairing bar code on its front. To pair the scanner with the cradle, scan the pairing bar code. A high-low-high-low beep sequence followed by a low-high beep sequence indicates successful pairing and connection to the remote device. A long low, long high beep sequence indicates unsuccessful pairing. Refer to the Product Reference Guide for more information.

Lost Connection to Host

If scanned data does not transmit to the cradle’s host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC If scanned data still does not transmit to the host, reestablish a connection with the host:

1. Disconnect the power supply from the cradle.

2. Disconnect the host interface cable from the cradle.

3. Wait three seconds.

4. Reconnect the host interface cable to the cradle.

5. Reconnect the power supply to the cradle, if required.

6. Reestablish pairing with the cradle by scanning the pairing bar code.

outlet, if applicable.

NOTE The FLB3578 does not always require a power supply, depending on the

host interface.

Charging the Scanner Battery in the Cradle

To charge the scanner battery, place the scanner in the cradle (see Inserting the

Scanner in the Cradle). The battery begins charging when the scanner LED indicator

starts flashing green. A complete charge of a fully discharged battery can take up to four hours using external power and up to 10 hours using the interface cable.

Page 9

Quick Reference Guide 9

Scanner LED Indicators

The green LED on the scanner indicates charging activity (see the table below). If the scanner is charging in fast mode (non-bus powered mode), the green LED blinks at a fast rate. If the scanner is charging in slow mode (bus-powered mode), the LED blinks at a slow rate. If the red LED on the scanner begins flashing, indicating a charging problem, remove the scanner from the cradle and replace the battery. If the red LED continues flashing, contact a Zebra business Support Center.

Standard Scanner Use LED Sequences

Off No power applied to scanner (battery is discharged or removed); scanner is

in low power and ready to scan. Green A bar code was successfully decoded. Red A data transmission error; scanner malfunction; or, LS3578 cordless scanner

was inserted into a STB3478 cradle.

Charging Use LED Sequences

Green Slow Flash The scanner

Green Fast Flash The scanner charges at the fast rate (used when cradle is

Red Flash Charging problem. Refer to the Product Reference Guide for

Red and Green Flash

powered from an external power supply).

more information. Temperature fault.

charges at the slow rate (used when the cradle is

Using a Host Interface to Supply Power

Some hosts can provide power to the cradle via the host interface, instead of an external power supply.

Troubleshooting

If the cradle does not work after following the previous procedures:

• Check the system power.

• Check for loose cable connections.

• Check that the scanner is inserted properly in the cradle.

• Check that the host settings are correct and the cradle is connected to the appropriate port on the host.

CAUTION Do not pour, spray, or spill any liquid on the cradle.

Mounting Template

Refer to the English version of this guide (p/n 72-94604-xx) for a mounting template.

Page 10

10 FLB3508/3578 Bağlantısı

Health and Safety Recommendations

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Yasal Bilgiler

Bu cihaz, bir Zebra Technologies şirketi olan onaylanmıştır.

Tüm Zebra cihazları, satıldıkları yerlerde geçerli olan kural ve yönetmeliklere uygun olacak şekilde tasarlanmıştır ve gerektiği gibi ETİKETLENİR.

Zebra ürünlerinde, Zebra tarafından açıkça onaylanmayan değişiklik ya da düzenlemelerin yapılması, kullanıcının ekipmanı kullanma iznini geçersiz kılabilir. Antenler: Yalnızca ürünle birlikte verilen anteni veya onaylı bir anten kullanın. Onaylı olmayan antenler, değişiklikler veya ekler hasara yol açabilir ve yönetmeliklere aykırı olabilir.

Kablosuz İletişim Modülleri

FLB3578, onaylı bir kablosuz iletişim modülü içerir. Bu modül aşağıda tanımlanmıştır. Bluetooth ™ Kablosuz İletişim Modülü, Tip: LMX5452.

Bluetooth Cihazlar

FLB3578, onaylı bir Bluetooth cihazıdır. Bluetooth Kimliği: B02794

Technologies, Inc. tarafından

Symbol

FCC'nin RF'na Maruz Kalma Kuralları

Güvenlik Bilgileri

Bu cihaz insanların, kablosuz iletişim cihazlarının yaydığı elektromanyetik alanlara maruz kalmasıyla ilgili Özgül Soğurma Oranı (SAR -Specific Absorption Rate) için uluslararası kabul gören standartlara uygundur.

RF Etkisini Azaltma – Kurallara Uygun Biçimde Kullanın

Bu cihazın yalnızca normal çalıştırma konumunda kullanılması ve cihaz çalışırken insan vücudunun hiçbir parçasının antenin çok yakınına gelmemesine dikkat edilmesi önerilir.

FCC'nin RF'na maruz kalma gereksinimlerini karşılamak için bu taşınabilir verici çalışırken, çevresindeki insanlardan en az 0 cm uzakta bulunmalıdır.

Page 11

Hızlı Başvuru Kılavuzu 11

Güç Kaynağı

SADECE BELİRTİLEN, Tip no. 50-14000 (5-14 Vdc/ 1,5 A minimum) veya PWRS-14000 (514 Vdc/ 1,5 A minimum), Doğrudan Takılı Güç Kaynağı, Sınıf 2 veya LPS (IEC60950-1, SELV) işaretli olanları kullanın. Başka bir Güç Kaynağının kullanılması, bu üniteye verilen onayları geçersiz kılabilir ve tehlikeli olabilir.

CAUTION Harici bir sigorta (sağlanmamıştır) zorunludur. Yangın tehlikesine

karşı korunmak için yalnızca 3 A, 125 V 19-60 Vdc sigorta kullanın.

Benutzen Sie nur eine genehmigt Stromversorgung 50-14000-122R Ausgabe: 9 Vdc und minimum 2 A. Die Stromversorgung ist bescheinigt nach EN60950-1 mit SELV Ausgaben. Bei Verwendung eines anderen Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann gefährlich sein.

VORSICHT Eine externe Sicherung (nicht mitgeliefert) ist nicht erforderlich. Zur

Verringerung der Brandgefahr sollten Sie ausschließlich Sicherungen verwenden, die für 3 A, 125 V / 9-60 V DC zertifiziert sind.

Kablosuz İletişim Frekansı Girişim Gereksinimleri-FCC

Kablosuz İletişim Frekansı Girişim Gereksinimleri-Kanada

Kablosuz İletişim Vericileri

Bu cihaz, Industry & Science Canada'nın RSS 210 standardına uygundur. Çalışması aşağıdaki iki koşula bağlıdır: (1) bu cihaz zararlı girişime neden olmayabilir, (2) bu cihaz, istenmeyen işlemlere yol açan girişimler de dahil olmak üzere, alınan her türlü girişimi kabul etmelidir. Etiket İşaretleri: Kablosuz iletişim sertifikasından önce gelen “IC:” terimi, yalnızca Industry Canada'nın öngördüğü teknik şartların sağlandığını gösterir.

Kablosuz İletişim Frekansı Girişim Gereksinimleri-Brezilya

Declarações Regulamentares para FLB3578 (LMX5452) BRAZIL NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo FLB3578. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra

interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário." Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br.

Kablosuz

Bu cihaz FCC Şartnamesi'nin 15. bölümüne uygundur. Çalışması aşağıdaki iki koşula bağlıdır: (1) bu cihaz zararlı girişime neden olmayabilir, (2) bu cihaz, istenmeyen biçimde çalışmasına yol açan girişimler de dahil olmak üzere, alınan her türlü girişimi kabul etmelidir.

İletişim

Vericileri (

15. bölüm)

İşareti ve Avrupa Ekonomik Alanı (AEA)

AEA’da Bluetooth kullanımıyla ilgili aşağıdaki kısıtlamalar vardır:

• 2,400 -2,4835 GHz frekans aralığında maksimum iletim gücü 10 mW EIRP

Uygunluk Beyanı

Zebra, işbu belgeyle bu cihazın 1999/5/EC, 2004/108/EC, 2006/95/EC ve 2011/65/EU direktiflerinin ilgili hüküm ve koşullarına uygun olduğunu beyan eder. Uygunluk Beyanı, http://www.zebra.com/doc adresinden edinilebilir.

Page 12

12 STB3508/3578 Cradle

Elektrikli ve Elektronik Ekipman Atıkları (WEEE)

Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес:

http://www.zebra.com/weee. Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee. Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο ∆ιαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee. English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee. Français: Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee. Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee. Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee. Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra. Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.

ζωής τους, πρέπει

Page 13

Quick Reference Guide 13

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji należy zwrócić do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajdują się na stronie internetowej http://www.zebra.com/weee. Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee. Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o vračilu izdelka obiščite: http://www.zebra.com/weee. Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee. Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.

Page 14

Zebra Technologies Corporation Lincolnshire, IL ABD

http://www.zebra.com

Zebra ve Zebra kafasının bulunduğu grafik ZIH Corp şirketinin tescilli ticari markalarıdır. Symbol logosu, bir Zebra Technologies şirketi olan Symbol Technologies, Inc. şirketinin tescilli ticari markasıdır. © 2015 Symbol Technologies, Inc.

72E-94604-02TU – Mart 2015 – Revizyon B

Servis Bilgisi

Ekipmanınızın kullanımıyla ilgili bir sorun yaşarsanız kurumunuzun Teknik veya Sistem Desteği ile iletişim kurun. Ekipmanla ilgili bir sorun varsa destek birimi şu adresteki Zebra Destek Merkezi ile iletişim kuracaktır: http://www.zebra.com/support

Bu kılavuzun en son sürümü için şu adresi ziyaret edin:

http://www.zebra.com/support