Zebra EWB100 CA1060, EWB100 Series Communications Appliance, Team Badge Customer Best Practices and Recommendations English

CA1060, EWB100

Communications Appliance, Team Badge

Customer Best Practices and Recommendations

The RMN5126A PTT Earphone product is designed for comfort and

busy retail environment

requires the product

Zebra Technologies believes

experience.

e suggestions

suggestions are in no way intended to

this product in a way that is detrimental to the customer, user, or product. The customer is

ggestion and carefully weigh its impact.

Please review the product user’s guide for a

Wearing the host product (CA10/EWB100)

general use of the host product:

Most individuals may find placement of the host product on a belt, tie, shirt or blouse

anyard most convenient.

However such a placement in an exposed position presents risks that the product may

be snagged by objects in the

product, and clothing worn by the associate.

Additionally, exposed product and cables can attract ESD events potentially creating

felt by the wearer, and

reliability for our

be worn by an individual in such a manner that operable

we can offer some suggestions for our customers’ to

be of interest to our customers

warranty, or cause the customer to use

dditional information on product storage, charging,

merchandise,

cause discomfort and distraction.

Description

CA1060-000A1NV010R
CA1060-000A1NV01R
EWB100-01-WM
EWB100-01-WR
EWB100-10-WM
EWB100-10-WR

Overview

Series

Model number

Communications Appliance
Communications Appliance
Team Badge, Single-pack
Team Badge, Single-pack
Team Badge, Multi-pack
Team Badge, Multi-pack

customers in
Convenience
features are readily accessible.
However,
enhance their product
The included comments ar

cautioned to consider each su

operation and use.

1. Observation-

•

pocket or l

•

•

static discharges

s.

we feel may

imply additional

user’s environment causing damage to

. These

the

1

2. Recommendation:

• Wear the product in a manner reducing exposure.

• Once the host product is activated, there is little need to touch the device again since

there is a PTT switch on the earphone cable.

• Ideally, the product should be worn out of site of the general public, and away from

snag risks, and ESD sources. The preferred location for the product would be on the
inside of a jacket, shirt or blouse, with only the product clip protruding to the outside.
The product should be worn at or about mid-point of chin and belt line.

• The user should also consider placing the product to the rear of the belt, facing outward

over a rear pocket of a pant leg, or waist band of a skirt or dress. This is less ideal than
above, as rear snags are a potential blind hazard.

• Alternatively, the user may wear the product to the side of their waist, if a rearward

placement presents seating difficulties.

• In the above suggestions, it is recommended the cable be worn under the clothing.

Wearing the earphone product (RMN5126A)

1. Observation-general use of the earphone:

• Excessive volume can damage hearing. The product was designed to mitigate excessive

volume, but all users are different. Adjust the volume to ensure a comfortable level.
Test the initial volume with the earphone slightly away from your ear before securing it
snugly in place. Follow the Acoustic Safety guidelines in the host product User Guide.

• Take care when using the product with a personal hearing device. Device volume

should be adjusted so communications can be comfortably heard over the
environment. If such a device is normally worn in one ear, use the earphone with the
other ear.

• The user needs to be aware of which ear they want to use for face-to-face

conversation, and which to use for wireless communications. Take the time to learn
your body’s preferences and follow your experience.

• The earphone is designed to be worn on either the left or right ear. The user can

configure the earphone for the alternate ear simply by holding the loop in one hand,
and rotating the ear phone housing 180 degrees

• Often the ear phone cable and PTT switch is left to dangle between ear and host device.

This will likely cause discomfort, and places the cable, ear phone and host product at
risk for damage.

2