Zebra EP10 EP10 Snap Module Information Sheet English

EP10™ SNAP MODULE INFORMATION
Two variants of the EP10 snap module are available:
USB & Charger Snap Module (Model No. RV4001) provides ports to connect a micro-USB cable and a power cable to the EP10, and
DB9 RS-232 & charger Snap Module (Model No. RV4002) provides an RS-232 connection and a power cable connection to the EP10.
Please review the points listed below before using your EP10 snap module.
Make certain that the logo on the snap module is front-facing when attaching it to the EP10.
A pop-up window is displayed on the EP10 when the hand-held is properly seated in the snap module.
The micro-USB variant USB connector supports USB On-The-Go.
The current version of the RS-232 snap module, identified through the serial number label containing 'C3' or higher, has +5V power on pin 9. The previous version of the RS-232 snap module (with serial numbers lower than 'C3') has RI (Ring Indicator) on pin 9.
COMPANY HEADQUARTERS SUPPORT SERVICES Psion Inc. For local support services, go to:
2100 Meadowvale Boulevard, Mississauga http://www.psion.com/service-and-support.htm Ontario, Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 81 2 6 300 8000245 Rev. B Sheet 1 of 1
January 17, 2013
EP10™ SNAP MODULE INFORMATION
Two variants of the EP10 snap module are available:
USB & Charger Snap Module (Model No. RV4001) provides ports to connect a micro-USB cable and a power cable to the EP10, and
DB9 RS-232 & charger Snap Module (Model No. RV4002) provides an RS-232 connection and a power cable connec­tion to the EP10.
Please review the points listed below before using your EP10 snap module.
Make certain that the logo on the snap module is front-facing when attaching it to the EP10.
A pop-up window is displayed on the EP10 when the hand-held is properly seated in the snap module.
Use only the universal AC power adaptor approved by Psion Inc. for the snap module – Model Number PS1050-G1.
The micro-USB variant USB connector supports USB On-The-Go.
The current version of the RS-232 snap module, identified through the serial number label containing 'C3' or higher, has +5V power on pin 9. The previous version of the RS-232 snap module (with serial numbers lower than 'C3') has RI (Ring Indicator) on pin 9.
COMPANY HEADQUARTERS SUPPORT SERVICES Psion Inc. For local support services, go to:
2100 Meadowvale Boulevard, Mississauga http://www.psion.com/service-and-support.htm Ontario, Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 81 2 6 300 8000245 Rev. B Sheet 1 of 1
January 17, 2013
Loading...