Zanussi ZWF 1210 User Manual

User Manual 2
Benutzerinformation 19

EN

DE

ZWF 1210

Washing Machine
Waschmaschine

Contents

Safety information 2
Safety instructions 3
Product description 4
Control panel description 5
Programme Chart 5
Consumption values

7

Options

8

Settings

9

Before first use 9
Daily use 9
Hints and tips 12
Care and cleaning 13
Troubleshooting 14
Technical Data

16

Garantie, Garanzia, Guarantee

17

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when it is

open.

• Cleaning and user maintenance shall not be made by children

without supervision.

General Safety

• Do not change the specification of this appliance.

• Obey the maximum load volume of 9 kg (refer to the

“Programme chart” chapter).

• The operating water pressure (minimum and maximum) must be

between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).

2 www.zanussi.com

• The ventilation openings in the base (if applicable) must not be

obstructed by a carpet.

• The appliance is to be connected to the water mains using the

new supplied hose-sets. Old hose sets must not be reused.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.

• Before maintenance, deactivate the appliance and disconnect

the mains plug from the mains socket.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.

Safety instructions

Installation

• Remove all the packaging and the transit
bolts.

• Keep the transit bolts. When you move the
appliance again you must block the drum.

• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied
with the appliance.

• Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.

• Make sure that the floor where you install the
appliance is flat, stable, heat resistant and
clean.

• Do not install the appliance where the
appliance door can not be fully opened.

• Make sure that there is air circulation
between the appliance and the floor.

• Adjust the feet to have the necessary space
between the appliance and the carpet.

• Do not install the appliance where the
appliance door can not be fully opened.

Electrical Connection

• The appliance must be earthed.

• Always use a correctly installed shockproof
socket.

• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.

• Do not use multi-plug adapters and
extension cables.

• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.

• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.

• Do not touch the mains cable or the mains
plug with wet hands.

• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.

• Only for UK and Ireland: The appliance has a
13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.

• This appliance complies with the E.E.C.
Directives.

Water connection

• Make sure not to cause damage to the water
hoses.

• Before you connect the appliance to new
pipes or pipes not used for a long time, let
the water flow until it is clean.

www.zanussi.com 3

• The first time you use the appliance, make
sure that there is no leakage.

Use

WARNING!

Risk of injury, electrical shock, fire,
burns or damage to the appliance.

• Use this appliance in a household only.

• Obey the safety instructions on the
detergent packaging.

• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.

• Make sure that you remove all metal objects
from the laundry.

• Do not put a container to collect possible
water leakage under the appliance. Contact
the Authorised Service Centre to ensure
which accessories can be used.

• Do not touch the glass of the door while a
programme operates. The glass can be hot.

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the mains
supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children
and pets to get closed in the appliance.

Product description

Appliance overview

1 2 3

5

6

4

1

Worktop

2

Detergent dispenser

3

Control panel

4

Door handle

5

Rating plate

6

Feet for the appliance level

4 www.zanussi.com

Control panel description

P

90°

60°

40°

30°

1200

1000

800

Ein /Aus

Marc he/Ar rêt

Kurz / Rapide

Intensiv /
Intensif

Bügelquick /
Anti-froissage

Spülen / Rinçage

Pumpen / Vidange
Schleudern /
Essorage

Koch-/Buntwäsche / Coton

Koch-/Buntwäsche / Coton ECO

Pflegeleicht / Synthétiques

Feinwäsche / Délicats

Wolle / Laine

Daunen / Couette

Mix 20°/ Mixtes 20°

9h

3h

6h

87621 3 4 5

1

On / Off button (Ein/Aus Marche/Arrêt)

2

Programme selection touchpad

3

Temperature selection touchpad

4

Spin selection touchpad

5

Options selection touchpad

6

Start/Pause touchpad

7

Indicators:
Child lock indicator
Extra rinse indicator
Door locked indicator

8

Delay start touchpad

Programme Chart

Programme

Temperature

range

Maximum load
Maximum spin

speed

Programme description

(Type of load and soil level)

30' @ 30°
30 °C

3 kg
800 rpm

A short cycle for synthetics and delicate items with
light soil level or for items to freshen up.

Koch-/Buntwäsche/
Coton
90 °C - Cold

9 kg
1200 rpm

White cotton and coloured cotton. Normal soil and light
soil.

Koch-/Bunt-

wäsche/Coton ECO

1)

60 °C - 40 °C

9 kg
1200 rpm

White cotton and colour-fast cotton. Normal soil. The
energy consumption decreases and the time of the washing
programme is extended.

Pflegeleicht/Synthé­tiques
60 °C - Cold

3,5 kg
1200 rpm

Synthetic items or mixed fabric items. Normal soil.

Feinwäsche/Délicats
40 °C - Cold

3,5 kg
1200 rpm

Delicate fabrics as acrylics, viscose, polyester items.
Normal soil.

www.zanussi.com 5

Programme

Temperature

range

Maximum load
Maximum spin

speed

Programme description

(Type of load and soil level)

Wolle/Laine
40 °C - Cold

2 kg
1200 rpm

Machine washable wool, hand washable wool and
delicate fabrics with «hand washing» care symbol.

2)

Daunen/Couette
60 °C - Cold

3 kg
800 rpm

Special programme for one synthetic blanket, duvet,
bedspread and so on.

Mix 20°/Mixtes 20°
20 °C

2 kg
1200 rpm

Special programme for cotton, synthetic and mixed fabrics
with light soil. Set this programme to decrease the energy
consumption. Make sure that the detergent is for low tem-

perature in order to have good washing results3).

1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are re­spectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They are the most efficient programmes in
terms of combined energy and water consumption for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected programme.

2) During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum doesn't rotate or doesn't rotate properly.
Consider this as a normal functioning of the appliance.

3) No temperature indicator is on .

Programme options compatibility

Programme Kur

z/

Ra

pid

e

1)

In-

ten-

siv/

In-

ten-

sif

Bü-

gel-

qui
ck/
An-

ti­froi
ssa

ge

Spü-

len/
Rin-

çage

Pum
pen/

Vi-

dang

e

Schle

uder

n/

Es-

sor-

age

30' @ 30° ■ ■ ■ ■
Koch-/Buntwä-

sche/Coton

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Koch-/Buntwä­sche/Coton ECO

■ ■ ■ ■ ■ ■ ■ ■

Pflegeleicht/
Synthétiques

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Feinwäsche/Déli­cats

■ ■ ■ ■ ■ ■ ■ ■ ■

Wolle/Laine ■ ■ ■ ■ ■ ■

6 www.zanussi.com

Programme Kur

z/

Ra

pid

e

1)

In-

ten-

siv/

In-

ten-

sif

Bü-

gel-

qui
ck/
An-

ti­froi
ssa

ge

Spü-

len/
Rin-

çage

Pum

pen/

Vi-

dang

e

Schle

uder

n/

Es-

sor-

age

Daunen/Couette ■ ■ ■ ■ ■ ■
Mix 20°/Mixtes

20°

■ ■ ■ ■ ■ ■ ■

1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing
results can be unsatisfactory. Recommended load: cotton: 4,5 kg, synthetics and delicates: 2,5 kg.

Consumption values

The data of this table are approximate. Different causes can change the data: the quan­tity and type of laundry, the water and ambient temperature.

Programmes Load

(kg)

Energy

consump-

tion (kWh)

Water con-

sumption

(litre)

Approxi-

mate pro-

gramme

duration

(minutes)

Remaining

moisture

(%)

1)

Koch-/Buntwäsche/
Coton 60 °C

9 1,58 84 175 53

Koch-/Buntwäsche/
Coton 40 °C

9 1,01 82 174 53

Pflegeleicht/Synthé­tiques 40 °C

3,5 0,74 61 122 35

Feinwäsche/Délicats
40 °C

3,5 0,54 62 74 35

Wolle/Laine 30 °C 2 0,30 63 57 30

Standard cotton programmes

Standard 60 °C cotton 9 1,03 49 220 53
Standard 60 °C cotton 4,5 0,77 40 187 53
Standard 40 °C cotton 4,5 0,62 40 181 53

1) At the end of spin phase.

www.zanussi.com 7

Off Mode (W) Left On Mode (W)

0,48 0,48

The information given in the chart above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.

Options

Temperature

With this option you can change the default
temperature.

Indicator = cold water.
The indicator of the set temperature comes on.

Spin

With this option you can change the default
spin speed.

The indicator of the set speed comes on.
Additional spin options:
No Spin

• Set this option to deactivate all spin phases.
Only the drain phase is available.

• The related indicator comes on.

• Set this option for very delicate fabrics.

• The rinses phase uses more water for some
washing programmes.

Rinse Hold

• Set this option to prevent the laundry
creases.

• The related indicator comes on.

• There is a water in the drum when the
programme is completed.

• The drum turns regularly to prevent the
laundry creases.

• The door stays locked. You must drain the
water to unlock the door.

To drain the water refer to ‘At the
end of the programme’.

Kurz/ Rapide

With this option you can decrease the
programme duration.

Use this option for items with light soil or items
to refresh.

The related indicator comes on.

Intensiv/ Intensif

With this option you can wash very soiled
laundry.

The washing cycle lasts longer with this option.
The related indicator comes on.

Bügelquick/ Anti-froissage

The appliance carefully washes and spins the
laundry to prevent the creases.

The appliance decreases the spin speed, uses
more water and adapts the programme duration
to the type of laundry.

The related indicator comes on.

Spülen/ Rinçage

With this option you can perform only a last
rinse of a selected washing programme.

If you set also the Extra Rinse function ( ) the
appliance adds two or more rinses.

The related indicator comes on.

Pumpen/ Vidange Schleudern/
Essorage

With this option you can perform the spin and
drain cycle.

The spin phase is suitable to the washing
programme you set.

If you set also the No Spin (

)

option, the appliance only drains.

Delay Start

With this option you can delay the start of a
programme by 9, 6 or 3 hours.

The indicator of the set value is on.

8 www.zanussi.com

Extra Rinse

With this option you can add some rinses to a
washing programme.

Use this option for persons allergic to
detergents and in areas where the water is soft.

The related indicator comes on.

1

Settings

Extra Rinse

With this option you can permanently have an
extra rinse when you set a new programme.

• To activate/deactivate this option touch
the buttons and at the same time until
the indicator comes on/goes off.

Child Lock

With this option you can prevent that the
children play with the control panel.

• To activate/deactivate this option, touch
the buttons

and at the same time until

the indicator comes on/goes off.

Activate this option after you touch the button

: the buttons are locked (except for the

button ) .

This option stays active even when
you switch off the appliance.

Acoustic signals

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.
To deactivate/activate the acoustic signals,

touch the buttons

and at the same time

for 4 seconds.

If you deactivate the acoustic
signals, they continue operate when
the appliance has a malfunction.

Before first use

1. Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton at the

highest temperature without laundry.

This removes all possible dirt from the drum and
the tub.

Daily use

WARNING!

Refer to Safety chapters.

Loading the laundry

Open the water tap. Connect the mains plug to
the mains socket.

1. Pull the door handle to open the appliance
door.

2. Put the laundry in the drum, one item at a
time.

3. Shake the items before you put them in the
appliance.

1 See in "Settings" how to activate this option.

www.zanussi.com 9

Make sure not to put too much laundry in the
drum. Refer to max. loads indicated in
"Programme chart".

4. Close the door.

CAUTION!

Make sure
that no
laundry
stays
between the
seal and the
door. There
is a risk of
water
leakage or
damage to
the laundry.

Using detergent and additives

1. Measure out the
detergent and the
fabric conditioner.

2. Carefully close the
detergent drawer.

Detergent compartments

Detergent compartment for wash­ing phase.
If you use liquid detergent, put it
immediately before you start the
programme.

Compartment for liquid additives
(fabric conditioner, starch).

CAUTION!

Do not exceed the
MAX level.

Flap for powder or liquid detergent.

Liquid or powder detergent

A

The default position of
the flap is A (powder
detergent).

To use liquid detergent:

1. Remove the drawer.
Push the drawer edge in
the place with the arrow
(PUSH) to remove the
drawer easily.

B

2. Adjust the flap in
position B.

3. Put back the drawer in
the recess.

When you use the liquid detergent:

• Do not use gelatinous or thick
liquid detergents.

• Do not put more liquid then 120
ml.

• Do not set the delay start.

A

When the flap is in
position B and you want
to use powder detergent:

1. Remove the drawer.

2. Adjust the flap in
position A.

3. Put back the drawer
in the recess.

• Measure out the detergent and the fabric
conditioner.

• Put the detergent and the fabric conditioner
into the compartments.

• Carefully close the detergent drawer.

Activating the appliance

Press and hold for a couple of seconds the
button to activate or deactivate the appliance.

10 www.zanussi.com

A tune sounds when the appliance is activated.
The appliance performs a start up animation.
The animation quickly shows each washing
programme and the default temperature and
spin settings.

Setting a programme

1. Touch the programme button and set the

programme:

• The indicator of the button flashes
slowly.

2. If necessary, change the temperature and
the spin speed or add available options.
When you activate an option, the indicator
of the set option comes on.

If you set something incorrect, the
indicator of the button flashes

red three times.

Starting a programme without the delay
start

Touch the button .

• The indicator of the button stops to
flash and stays on.

• The programme starts, the door locks,
the indicator is on.

The drain pump can operate for a
short time at the beginning of the
washing cycle.

Starting a programme with the delay
start

The start of the programme can be delayed by
9, 6 or 3 hours.

1. Touch the button to choose the delay
you want to set.

The indicator of the selected delay is on.

2. Touch the button :

• The appliance starts the countdown.

• When the countdown is completed, the
programme starts automatically.

You can cancel or change the set of
the delay start before you touch the

button . After touching the
button you can only cancel the

delay.

To cancel the delay start:

1. Touch the button to set the appliance
to pause.

2. Touch the button until the indicator of
the set delay goes off.

Touch the button again to start the
programme immediately.

Interrupting a programme and changing
the options

You can change only some options before they
operate.

1. Touch .

The indicator of this button flashes.

2. Change the options.

3. Touch again.

The programme continues.

Cancelling a programme

1. Press the button for some seconds to

cancel the programme and to deactivate the
appliance.

2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.

The appliance does not drain the
water. The water left in a drum can
be used for the next washing cycle.

Opening the door

While a programme or the delay start operates,
the appliance door is locked. The indicator

is on.

CAUTION!

If the temperature and level of the
water in the drum are too high, you
cannot open the door.

To open the door during the first minutes
of the cycle or when the delay start
operates:

1. Touch the button to pause the

appliance.

2. Wait until the indicator goes off.

3. You can open the door.

4. Close the door and touch the button

again. The programme (or the delay start)
continues.

www.zanussi.com 11

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is
activated).

• The indicator of the button goes off.

• The door lock indicator goes off.

• You can open the door.

• Remove the laundry from the appliance.
Make sure that the drum is empty.

• Press the button for some seconds to
deactivate the appliance.

• Close the water tap.

• Keep the door and the detergent drawer
ajar, to prevent the mildew and odours.

The washing programme is completed,
but there is water in the drum:

• The drum turns regularly to prevent the
creases in the laundry.

• The indicator flashes to remind you to
drain the water.

• The door lock indicator is on. The
indicator of button flashes. The door

stays locked.

• You must drain the water to open the door.

Draining the water:

1. To drain the water.

• Touch the button

. The appliance
drains the water and spins with the
maximum spin speed for selected
washing programme.

• Alternatively, touch the button to
change the spin speed and then touch

the button . The appliance drains the
water and spins. If you set , the

appliance only drains.

2. When the programme is completed and the
door lock indicator goes off, you can

open the door.

3. Press the button for some seconds to
deactivate the appliance.

The appliance drains and spins
automatically after approximately 18
hours (except for Wool programme).

AUTO-OFF option

The AUTO-OFF stand-by option automatically
deactivates the appliance to decrease the
energy consumption. All the indicators go off
when :

• You do not use the appliance for 5 minutes

before you touch .
Press the button to activate the appliance

again.

• After 5 minutes from the end of the washing

programme.
Press the button to activate the appliance

again.
Touch the button if you want to set a new

cycle.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured,
synthetics, delicates and wool.

• Obey the washing instructions that are on
the laundry care labels.

• Do not wash together white and coloured
items.

• Some coloured items can discolour with the
first wash. We recommend that you wash
them separately for the first times.

• Button up pillowcases, close zippers, hooks
and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool
and items with painted illustrations.

• Remove hard stains.

• Wash with a special detergent heavy soil
stains.

• Be careful with the curtains. Remove the
hooks or put the curtains in a washing bag
or pillowcase.

• Do not wash in the appliance laundry without
hems or with cuts. Use a washing bag to
wash small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).

• A very small load can cause balance
problems with the spin phase. If this occurs,
adjust manually the items in the tub and start
the spin phase again.

Stubborn stains

For some stains, water and detergent is not
sufficient.

12 www.zanussi.com