Zanussi ZOB 383 User Manual
EN
User manual
Oven
ZOB 383
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Hints, tips and cooking tables _ _ _ _ _ _ _ _ _ _ _ 7
Safety information
Before the installation and use, read this m anual carefully:
• For your personal safety and the safety of your property
• For the respect of the environment
• For the correct operation of the appliance.
Always keep these instructions with the appliance also if
you move or sell it.
The manufacturer is not responsible if incorrect installation or use results in damage.
Children and vulnerable people safety
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge to use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety.
• Keep all packaging away from children. There is the
risk of suffocation or physical injury.
• Keep children and small animals away from the appliance when the door is open or the appliance is in operation. There is the risk of injury or other permanent
disability.
• If the appliance has Switch-on lock or Key lock function, use it. It prevents children and small animals from
accidental use of the appliance.
General safety
• Do not change the specifications of this appliance.
There is the risk of injury and damage to the appliance.
• Do not let the appliance stay unattended during operation.
• Switch off the appliance after each use.
Installation
• Only an approved electrician can install and connect
the appliance. Contact an approved service centre. This
2
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14
Subject to change without notice
is to prevent the risks of structural damage or physical
injury.
• Make sure that the appliance is not damaged because
of transport. Do not connect a damaged appliance. If
necessary, contact the supplier.
• Remove all packaging, stickers and layers from the
appliance before first use. Do not remove the rating
plate. It can invalidate the guarantee.
• Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance
(safety regulations, recycling regulations, electrical or
gas safety rules etc.).
• Make sure that the appliance is disconnected from the
power supply during the installation.
• Be careful when you move the applia nce. The appliance
is heavy. Always use safety gloves. Do not pull the
appliance by the handle.
• The electrical installation must have an isolation device
which lets you disconnect the appliance from the mains
at all poles. The isolation device must have a contact
opening width of minimum 3 mm.
• You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.
• The shock protection parts must be fixed in such a way
that they cannot be undone without tools.
• Some parts of the appliance carry current. Close the
appliance with furniture and make sure that there are
no free spaces. It prevents electrical shock because you
cannot accidentally touch dangerous parts.
• Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable.
• Make sure that the appliance is installed below and
adjacent safe structures.
• Keep the minimum distances to the other appliances
and units.
• Install the appliance with its back and one side close
to the higher appliance. The other side must be close
to appliance with the same height.
• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are attached with special connection system. To prevent
damage to the appliance, only use an appliance with
the appliances from the same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the rating plate
agree with your domestic power supply.
• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• When you connect electrical applianc es to mains sockets, do not let cables touch or come near the hot appliance door.
• Do not use multi-way plugs, connectors and extension
cables. There is the risk of fire.
• Do not replace or change the mains cable. Contact the
service centre.
• Make sure not to squash or cause damage to the mains
plug (if applicable) and cable behind the appliance.
• Make sure that the mains connection is accessible after
the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if applicable.
Use
• The appliance is only for domestic use. Do not use the
appliance for commercial and industrial use.
• Only use the appliance for domestic cooking tasks.
This is to prevent physical injury to persons or prevent
damage to property.
• Do not use the appliance as a work surface or storage
surface.
• Do not put flammable products or items that are wet
with flammable products, and/or fusible objects (made
of plastic or aluminium) in, near or on the appliance.
There is the risk of explosion or fire.
• The interior of the appliance becomes hot during use.
There is the risk of burns. Use gloves when you insert
or remove the accessories or pots.
• Be careful when you remove or install the accessories
to prevent damage to the oven enamel.
• Always stay away from the appliance when you open
the door while the appliance is in operation. Hot steam
can release. There is the risk of skin burns.
• To prevent damage or discoloration to the enamel:
– do not put any objects directly on the appliance floor
and do not cover it with aluminium foil;
– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance
after you finish the cooking.
• Discoloration of the enamel has no effect on the performance of the appliance
• Do not use this appliance if it is in contact with water.
Do not operate the appliance with wet hands.
• Do not apply pressure on the open door.
• Always close the appliance door when you cook, even
while grilling.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the appliance from the power supply.
• Before maintenance, make sure that the appliance is
cold. There is the risk of burns. There is the risk that
the glass panels can break.
• Keep the appliance clean at all times. A build-up of fats
or other foodstuff can result in a fire.
• Regular cleaning prevents the surface material from
deteriorating
• For your personal safety and the safety of your property, only clean the appliance with water and a soap.
Do not use flammable products or products that can
cause corrosion.
• Do not clean the appliance with steam cleaners, highpressure cleaners, sharp objects, abrasive cleaning
agents, abrasive sponges and stain removers
• If you use an oven spray, follow the instructions from
the manufacturer. Do not spray anything on the heating
elements and the thermostat sensor.
• Do not clean the glass door with abrasive cleaning
agents or metal scraper. Heat resistant surface of the
inner glass can break and shatter.
• When the door glass panels are damaged they become
weak and can break. You must replace them. Contact
the service centre.
• Be careful when you remove the door from the appliance. The door is heavy!
• Do not clean catalytic enamel (if applicable).
3
Oven lamp
• Disconnect the appliance from the power supply before
the replacement of the oven lamp. There is the risk of
electrical shock!
Service centre
• Only an approved engineer can repair or work on the
appliance. Contact an approved service centre.
• Use only original spare parts.
Product description
General overview
2 3 5
1
10
9
4
6
7
8
Disposal of the appliance
• To prevent the risk of physical injury or damage
– Disconnect the appliance from the power supply.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents children or
small animals from being closed inside of the appliance. There is the risk of suffocation.
1 Control panel
2 Temperature indicator
3 Temperature control knob
4 Display
5 Oven function control knob
6 Air vents for the cooling fan
7 Heating element
8 Oven lamp
9 Rating plate
10 Fan
Oven accessories
• Oven shelf
For cookware, cake tins, roasts.
• Deep roasting pan
Before first use
Warning! Refer to "Safety information" chapter.
Setting the time
The oven only operates after time set.
4
To bake and roast or as pan to collect fat.
• The roasting pan grid
To put in the deep roasting pan.
When you connect the appliance to the electrical supply
or in case of a power cut, the Time function indicator
flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the
display shows the time of day set.
For time change you must not set an automatic
function (Duration
or End ) at the same time.
Daily use
Preheating
1.
Set function
2. Run an empty oven for 45 minutes.
3.
Set function
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface.
Accessories can become more hot than in normal use.
During this period an odour and smoke can be emitted.
This is normal. Make sure the airflow is sufficient.
and maximum temperature.
and maximum temperature.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
Warning! Refer to "Safety information" chapter.
Switching the Oven On and Off
1. Turn the oven functions control knob to an oven
function.
2. Turn the temperature control knob to a temperature.
The temperature indicator comes on while the oven
temperature increases.
3. To switch off the oven, turn the oven functions control
knob and the temperature control knob to the Off position.
Oven Functions
Oven function Application
OFF position The appliance is OFF.
Oven lamp Lights up without any cooking function.
Conventional cooking Heats both from the top and bottom element. To bake and roast on one oven level.
Top heating element Heats only from the top of the oven. To finish cooked dishes.
Bottom heating element Heats only from the bottom of the oven. To bake cakes with crispy or crusty bases.
Grill To grill flat food items in small quantities in the middle of the shelf. To make toasts
5
Loading...