CNPS9900 Max
User’s Manual
CNPS9900 Series
CNPS9900 Max
Intel Socket LGA 2011 V3/2011/ 1366 / 1156 / 1155 / 1151 / 1150 / 775 CPUs
AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs
CNPS9900A LED / NT
Intel Socket LGA 1366 / 1156 / 1155 / 1151 / 1150 / 775 CPUs
AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs
To ensure safe and easy installation, please read
the following precautions
www.ZALMAN.com
Ver. 150806
1. Precautions
1) Avoid inserting objects or hands into the fan while it is in operation to
prevent product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or
irritation persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this
product.
4) Excessive force exerted on the fan may cause damage to the fan and/
or system.
5) Use and keep product away from the reach of children and pets.
6) Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
7) Zalman Tech Co., Ltd. is not responsible for any damages due to
overclocking.
8) Before transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the
transport of a system.
9) Enable PWM function in BIOS settings after installation.
10) Product design and specifications may be revised to improve quality
and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration, repair,
improper installation, or improper testing.
2. Specications
Spec.
Heat Dissipation Area 5,402㎠
Quiet Mode
[w/Resister]
Fan
Normal Mode
[w/o Resister]
Thermal Grease
[M-STG2]
Model
Material Pure Copper Pure Copper, Black-Pearl Nickel Plated
Weight 730g 755g
Dimensions 94(L) X 131(W) X 152(H)mm
Bearing 2 Ball-Bearing Long Life Bearing
Noise Level 18~28.5 dBA±10% 18~27 dBA±10%
Noise Level 19.5~38.0 dBA±10% 18~30 dBA±10%
capacity 3.5g
Temp.Range -40℃ ~ +150℃ (-40 ~+302℉)
CNPS9900A LED CNPS9900 NT
RPM 800~1300 rpm±10% 900~1500 rpm±10%
RPM 1000~2000 rpm±10% 900~1700 rpm±10%
CNPS9900 MAX
(BLUE / RED)
.COM
1
3. Components
1) Common Components
Cooler
Thermal Grease
[ZM-STG2]
Gold Bolts
(Socket LGA 1366)
Nuts
2) Intel Components 3) AMD Components
CNPS9900 MAX : 2011 V3/2011/1366/1156
/1155/1151/1150/775
CNPS9900A LED / NT : 1366/1156/1155/1151/1150/775
Intel Clip
Side Caps
Silver Bolts A (4mm)
(Socket LGA 2011 V3/
2011 CNPS9900MAX Only)
Backplate
Resistor
Loading Block
Socket FM2/FM1/AM3+/AM3/AM2+/AM2
User’s Manual
Allen Wrench
(3/32")
Silver Bolts B (3mm)
(Socket LGA 1156/1155/
1151/1150/775/
AMD)
Double-sided Tape
AMD Clip
.COM
2
4. Installation Requirements
1) Space Requirements
The installation requires unobstructed space of 133mm (width) x 96mm
(length) x 154mm (height) with the CPU as the central reference point. Before
installation, please check if memory modules or motherboard heatsinks will not
have any clearance issues with the CPU cooler.
2) Air Guide Removal
Air guides on enclosures must be removed, before the cooler’s installation, for
they protrude into the cooler’s required space.
96㎜
154㎜
133㎜
3) Protective Brace Removal
Please unclip and remove the heatsink's plastic brace before installing the cooler.
4) Cooler Orientation
Orient the cooler so that the thinner heatsink is facing the
rear exhaust fan, while the thicker heatsink is facing the
front case fan (see right image).
5) Cooler Handling
Please hold the cooler with both hands
as shown in the diagram.
.COM
3
Loading...