* Please read this manual thoroughly before installation.
http://www.zalman.co.kr http://www.zalmanusa.com
IInntteell SSoocckkeett 777755 CCPPUU
Core 2 Duo
Dual Core Pentium
Pentium D
Pentium 4
Celeron D
AAMMDD SSoocckkeett AAMM22//775544//993399//994400 CCPPUU
Athlon 64 FX
Athlon 64 X2 Dual- Core
Athlon 64
Opteron
Sempron
(English version)
CNPS9700 NT
※
The specifications of any product may change without prior notice to improve performance.
1
3. Exploded View
Fan
Fan Support
CPU Block Cover
Heat sink
CPU Block Fixing Bolt
1. Features
1) Compatible with all single and dual core CPUs for Intel Socket 775 and AMD Sockets AM2/754/939/940.
2) Automatic Fan Speed Control feature included in the Ultra Quiet 110mm PWM(Pulse Width Modulation)
enabled fan.
3) 100% copper heatsink with aerodynamically optimized “tunnel” design for maximum cooling efficiency.
4) Innovative, patented, “figure 8” heatpipe design for a heat transfer capacity of up to six heatpipes with
the use of just three.
5) 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.
6) Super Thermal Grease (ZM-STG1) included.
Rotation Speed
Note
(1)
The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets
AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler
that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when
moving a computer.
Note
(2)
Measured at 1m from noise source.
Note
(3)
Optimal performance will be reached after approximately 7 days of regular computer use from the
time of installation.
CNPS9700 NT
Model
Spec.
Materials
Dimensions
(mm)
Heat Dissipation Area (㎠)
Weight(g)
Bearing Type
Noise Level (dBA)
Control Method
Capacity
Temperature Range
Pure Copper and Aluminum
90(L) X 124(W) X 142(H)
5,490
Heatsink : 690g, Total (including fan) : 764g
(1)
2 Ball-Bearing
1,250RPM ± 30 % ~ 2,800RPM ± 10 %
19.5dBA ~ 35dBA ± 10%
(2)
PWM Control, Auto Restart
3.5g
-40℃~150℃ (-40℉~302℉)
2. Specifications
Fan
ZM-STG1
(3)
※
The specifications of any product may change without prior notice to improve performance.
2
Korean Patent Reg. No. 10-0600448
Korean Design Reg. No. 30-0403411, 0403412
Patent applications pending in over 20 nations around the world including USA, EU, and Japan.
4. Patents
1) Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
2) Avoid inserting any objects into the fan while it is in operation.
3) Use and keep the product away from the reach of children and pets.
4) Check the components list and condition of the product before installation. If any problem is found, contact
your place of purchase to obtain a replacement.
5) Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention.
Disclaimer)
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited
to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation,
or improper testing.
5. Precautions
7. Compatible CPUs
1) All Intel CPUs of Socket 775
2) All AMD CPUs of Socket AM2/754/939/940
2) Components for AMD Sockets AM2/754/939/940
❹
One (1) Clip for AMD Sockets
❺
One (1) Clip Lever for AMD Sockets
3) Components for Intel Socket 775
❻
One (1) Clip (S-Type)
❼
Four (4) Bolts (for installing the cooler)
❽
Four (4) Clip Support Fixing Bolts for Socket 775
❾
One (1) Clip Support for Socket 775
❿
One (1) Backplate for Socket 775
1) General Components
❶
One (1) CNPS9700
❷
One (1) Thermal Grease (ZM-STG1)
❸
One (1) User’s Manual
6. Components
❶
❺
❹
❷
❿
❸
❼
❽
❾
❻
※
The specifications of any product may change without prior notice to improve performance.
3
8. Installation Requirements
If the case is equipped with an Air Guide, then the Air Guide Duct must be removed before installation.
Refer to the following diagrams, and install only on systems that meet the following installation requirements :
①
No interfering components (PSU, graphic card etc.) within 62mm from the center of the CPU.
No interfering components (ODD etc.) within 48mm from the center of the CPU.
Case cover must be at least 150mm apart from the motherboard.
9. Installation
※※
The Clip Installation Method
The CNPS9700 must be installed in the orientation that matches the rear system fan’s airflow.
(Refer to the diagram above)
The Clip installation method depends on the motherboard’s socket orientation.
Follow the correct installation method for your motherboard type.
Be careful not to exert excessive force on the fan during installation of the Clip, as it may damage the fan.
A. For motherboards with a horizontally-oriented Retention Guide
B. For motherboards with a vertically-oriented Retention Guide
Retention Guide
Clip
Retention Guide
Clip
Case Cover
150mm
Motherboard
PSU
62mm
62mm
System Fan
Air Flow
Case
48mm
Graphic Card Slot
※
The specifications of any product may change without prior notice to improve performance.
4
⑤⑤
Power Connection
◆
Please refer to “10. Power Connection” on page 6.
1) Intel Socket 775
①①
Clip Installation
Refer to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type,
⑥
) according to
the orientation of the Retention Guide.
②②
Clip Support Installation
Align the Clip Support for Socket 775 (
⑨
) and the Backplate for Socket 775 (⑩) with the mounting holes
on the motherboard, and fasten them together by using the Clip Support Fixing Bolts (
⑧
).
The Lever Slot on the Clip Support for Socket 775 (
⑨
) must be properly oriented on the hinged side
of the socket lever when installing.
※
The Backplate Support on the Backplate for Socket 775 (⑩) can be removed if deemed unnecessary.
③③
Thermal Grease Application
Clear off particles or any residue from the contact surface of the CPU and heatsink. Shake the
Thermal Grease (ZM-STG1,
②
) well then apply on the contact surface of the CPU and heatsink base.
CPUCPU
CPUCPU
※
Note
When installing the CNPS9700 on a motherboard with a horizontallyoriented Retention Guide, take extra care to not exert excessive force
on the fan. Excessive force may damage the fan.
Clip Support Fixing Bolt, ⑧
Clip Support for Socket 775, ⑨
Motherboard
Backplate for Socket 775, ⑩
Backplate Support
Socket Lever Hinge
Socket Lever
Lever Slot
④④
Cooler Installation
Insert two Bolts (⑦) into the holes of the Clip (S-type, ⑥) and
place the CNPS9700 on the center of the CPU. Slightly fasten
the Bolts (
⑦
) into the holes of the Clip Support for Socket 775
(
⑨
), then fasten the Bolts (⑦) in an alternating manner until the
Clip (S-Type,
⑥
) is completely pressed against the Clip Support
for Socket 775.
Bolt, ⑦
Clip(S-Type), ⑥
※
The specifications of any product may change without prior notice to improve performance.
5
④④
Power Connection (FAN MATE 2)
◆
Please refer to “10. Power Connection” on page 6.
2) AMD Socket AM2/754/939/940
①①
Thermal Grease Application
Clear off particles or any residue from the contact surface of the CPU and heatsink. Shake the
Thermal Grease (ZM-STG1,
②
) well then apply on the contact surface of the CPU and heatsink base.
②②
Clip Installation
Refer to “The Clip Installation Method” on page 3 to correctly install the Clip for AMD Sockets (
④
) and Clip
Lever (
⑤
) on the CNPS9700 according to the orientation of the Retention Frame. First insert the Clip for
AMD Sockets (
④
) into the Heatsink (①), then connect the Clip Lever (⑤) with the Clip (④).
③③
Cooler Installation
Place the CNPS9700 on the center of the CPU. Align and connect the Slot of the Clip (④) with the
Center Lug of the Retention Frame. Press onto the Clip Lever (
⑤
) when aligning the Clip Slot and
Center Lug.
Clip’s Slot
Center Lug
Clip Lever,
⑤
Lever’s Slot
Center Lug
※
The specifications of any product may change without prior notice to improve performance.
6
10. Power Connection
Connect the CNPS9700 NT’s Fan Connector to the Motherboard as shown in the diagram.
11. Notes on Usage
1) Checking CPU Compatibility
Please refer to “Compatible CPUs” on page 2 to confirm that your CPU is compatible with the CNPS9700
before using it.
2) Cautions During Booting
Operation of the PWM fan varies depending on the motherboard’s BIOS settings. Please activate the
PWM Control mode in the BIOS settings after installation. Refer to the motherboard’s manual for det ailed
information regarding the PWM Control mode.
3) Overclocking
Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.
Fan Connector
(CNPS9700)
Motherboard
※
The specifications of any product may change without prior notice to improve performance.
7
14.
Home Theatre PC Enclosures
TNN Computer Enclosures are the world’s first environment-friendly noiseless computer enclosures
that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself
as a heatsink. They are ideal for environments that require silence, as well as for home theatre
systems and multi-media systems.
The HD160 is designed for ultra quiet home theatre
PC operation, utilizing optimized ventilation and
anti-vibration reinforcements, making it ideal for
environments that require silence such as living
rooms, bedrooms, educational facilities, and offices.
For more information, please visit our website.
13.
TNN (Totally No Noise) Computer Enclosures
TNN 300 TNN 500AF
HD160
Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless
Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless
computing environment.
12. Zalman Computer Noise Prevention System
Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler
Noiseless Case Fan Ultra Quiet VGA Cooler Fan Controller
Loading...