ZALMAN 7700LED User Manual
* Please read before installation.
http://www.zalman.co.kr http://www.zalmanusa.com
Intel
Dual Core Pentium / Pentium 4
Socket 775 CPU
Grip (S-Type)
Grip (L-Type)
Inner Hole
Grip (L-Type)
Outer Hole
Intel Pentium 4
Socket 478 CPU
AMD Sempron/AMD64
(Athlon 64 X2/Opteron/Athlon 64)
Socket 754/939/940 CPU
CNPS7700 LED
(English version)
※
The specifications of any product may change without prior notice to improve performance.
1
Fan
Clip
Fan Fixing Screw
Grip (S-Type)
Grip (L-Type)
Fan Support Fixing Screw
Fan Support
FHS
1. Features
2. Specifications
3. Exploded View
1) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation.
2) Supports Intel Dual Core Pentium / Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), AMD Athlon
64 X2 Dual Core, Sempron / AMD64 (Socket 754/939/940) for broad compatibility.
3) The large 120mm fan inside the FHS maximizes cooling performance by providing sufficient airflow
even at low fan speed.
4) The large 120mm fan provides air flow over a large area, cooling not only the CPU, but the VGA card,
Northbridge, FET, and RAM as well.
5) The high intensity red LEDs will operate with sufficient brightness even in low operating voltage.
6) The adjustable fan speed controller (FAM MATE 2) enables control of noise and fan performance.
2) FAN MATE 2
- Output Voltage : 5V ~11V
2%
- Power Consumption : 6W or lower
(Note 1) The maximum weight for a cooler is specified as 450g for Intel Socket 775/478 and AMD Socket
754/939/940. Special care should be taken when moving a computer equipped with a cooler
which exceeds the relevant weight limit. Zalman is not responsible for any damage that occurs
when moving a computer.
(Note 2) The cooler fan operates at 2,300rpm if connected directly to the motherboard’s power connector
without the use of FAN MATE 2.
(Note 3) Noise measured 1m distance away from source.
1) Cooler (CNPS7700 LED)
CNPS7700-AlCu LED CNPS7700-Cu LED
Model
Spec.
Materials
Weight
Thermal Resistance
Dimensions
Dissipation Area
Bearing Type
Fan Speed
Noise Level
Input Voltage
Pure copper and pure aluminum
600
(1)
0.19 ~ 0.28 ℃/W
918
(1)
0.17 ~ 0.24 ℃/W
136 (L) X 136 (W) X 67 (H) mm
3,268 ㎠
2 Ball-Bearing
1,000 ~ 2,000rpm ± 10%
2)
22.7 ~ 37.1dBA ± 10%
3)
5 ~ 12V
※
The specifications of any product may change without prior notice to improve performance.
2
❿
❾
❶
❸
❺
❹
❻
❽
❼
❷
Korean Patent No. 389257
Korean Patent Design No. 327440-3
Parents pending in over 20 nations around the world, including the USA, EU, and Japan
4. Patents
Precautions
1) Keep the product away from children.
2) Check to see that all components are present, and check the condition of the product and its components before
installation. If there is any problem, contact the place of purchase for a replacement.
3) If excessive force i s exerted on the fan, the fan may malfunction and result in damage to the product and/or the
computer.
4) Do not insert your finger into the fan while it is operating.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including b ut not
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair,
improper installation, or improper testing.
1) Common Components
❶
FHS Assembly (CNPS7700 LED)
❷
Four (4) Grips (2 each for S-Type and L-Type)
❸
Four (4) Bolts (for installing the FHS)
❹
Thermal Grease
❺
Fan Speed Controller (FAN MATE 2)
❻
Double - sided Tape (for installing FAN MATE 2)
❼
Cable for FAN MATE 2
❽
User’ s Manual (in English and Korean)
5. Components
2) Components for Intel Dual Core Pentium/Intel
Pentium 4 (Socket 775)
❾
One (1) Clip Support for Socket 775
❿
One (1) Backplate for Socket 775
Four (4) Clip Support Fixing Bolts
3)
Components for Intel Pentium 4 (Socket 478)
Two (2) Clip Supports for Socket 478
4)
Components for AMD Sempron / AMD64 (Socket 754/939/940)
Two (2) Nipples
One (1) Backplate for AMD64
One (1) set of Washers
Loading...